Power Small Engine Safety Switch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11087492
The Switch is an OEM replacement part for Whirlpool refrigerators. It is designed to control the water dispensing function of your refrigerator, providing a convenient and easy way to access filtered water. It is responsible for activating the water flow when pressed, allowing you to dispense water into your glass or container.
A bad refrigerator water dispenser switch can occur due to wear and tear, physical damage, or electrical malfunction. If you notice symptoms such as the switch not responding when pressed, inconsistent water flow, or a complete lack of water dispensing, it may be time to replace the switch.
Symptoms of a bad refrigerator water dispenser switch include:
- Switch not responding when pressed
- Inconsistent water flow
- Lack of water dispensing
Restore your refrigerator's water dispenser by replacing the faulty or damaged water dispenser switch with this genuine OEM part.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
More
$28.43
- Compare At:
-
$34.12
- You Save:
-
$5.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3191049
Fix a burner that won't heat or has no temperature control by replacing this 6-inch element switch. Restores smooth low-to-high heat adjustment in 30 minutes.
Do-It-Yourself Stories from Customers like You
2 of 4 burners lost variable heat finction James R. • Centreville , VA • August 04, 2015
Trial and error only cooktop unit. Everything mounted into the counter and needed to pull unit out. I figured it was a control switch or the burner itself. Based on costs, I took the less expensive route and replaced the 2 known malfunctioning switches. All on-line videos said it was a 2-3 hour process to replace. I finished mine in less than 30 minutes. Turned breaker back on and it works like a charm. 30 years old and still going strong.
Read more
More
$83.36
- Compare At:
-
$99.20
- You Save:
-
$15.84
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74008248
Burner won't heat or dual-ring stops working? This dual infinite switch restores power control to both circuits of your cooktop element. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
I was hanging a light above the cooktop and put my foot on the edge of the glass and my wife heard the glass snap Robert C. • Lyman , WY • February 04, 2017
I looked up the parts on appliancepartspros.com, made the order, and was amazed how fast the parts arrived! I was able to watch their repair video and it showed me how to change it step by step.
Read more
More
$63.65
- Compare At:
-
$81.36
- You Save:
-
$17.71
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10268911
Washer overfilling or underfilling? The water level pressure switch senses tub pressure to control fill cycles. DIY repair in 20 minutes or less.
Do-It-Yourself Stories from Customers like You
My washer was overfilling Steve T. • Warwick , NY • January 25, 2016
Called appliance parts and asked, what was the fix. Told it was fill switch and that I could order it.
I was amazed that I received the part the next day without even asking for overnight delivery. I installed the part in less then 20 min. Problem fixed..
Read more
More
$111.44
- Compare At:
-
$133.73
- You Save:
-
$22.29
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY704512
If your gas burner won't light or clicks continuously, this igniter switch mounts on the valve stem to restore reliable ignition. Takes 5 minutes to replace.
Do-It-Yourself Stories from Customers like You
Front right burner would not light all other burners worked fine Kurt Z. • Austin , TX • February 06, 2015
By replacing the switch, the front right burner correctly turned on the igniter and worked. Repair took about 5 minutes. Very easy to do.
Read more
More
$64.70
- Compare At:
-
$76.35
- You Save:
-
$11.65
Genuine Whirlpool part
By: Whirlpool
Part Number: 279054
Dryer not heating or running too hot? This high-limit thermostat regulates temperature to prevent overheating. Easy DIY fix takes 30 minutes or less.
Do-It-Yourself Stories from Customers like You
Dryer would come on but would not heat John H. • Westfield , NY • January 23, 2015
FIRST I PULL THE DRYER OUT FROM THE WALL AND TOOK THE BACK OFF. WITH A 5/16 NUT DRIVER. NEXT WITH A LIGHT SET UP I LOOKED FOR ANY BURNT, BROKEN,OR LOSE WIRES THAT MY HAVE COME OFF ANY CONNECTIONS. I HAVE AN ELECTRIC DRYER AND AS I LOOKED DOWN TO THE HEATING COIL AREA, WHAT I WILL CALL A HI-TEMP SWITCH I COULD SEE THAT THE PART APPEARED BURNT. I PULLED THE POWER PLUG AND TOOK MY VOLT, OHM, MIL'LI'AMP METER, SET IT TO OHMS ON ABOUT 20K. THEN I TOOK MY NEEDLE NOSE PLIERS AND PULLED ONE WIRE...
Read more
More
$51.62
- Compare At:
-
$60.91
- You Save:
-
$9.29
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304528828
Fix intermittent burner failures or electrical issues with this range wiring harness. Restores power flow when connections are loose, burnt, or broken.
More
$80.95
- Compare At:
-
$96.33
- You Save:
-
$15.38
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22004243
Washer won't start or spin? A faulty lid switch prevents operation when the lid position isn't detected. Simple clip-in replacement, typically done in 10 minutes.
Do-It-Yourself Stories from Customers like You
The washer quit working Andrew S. • Franklinville , NY • March 27, 2014
Took off the back of the top pushed the switch forward and lifted it out after I unplugged it. Put the new switch in the opposite of how I took it out, plugged in the wires put the back on and finished my laundry.
Read more
More
$75.95
- Compare At:
-
$90.38
- You Save:
-
$14.43
Genuine Whirlpool part
By: Whirlpool
Part Number: WP53-0771
Dryer won't start or overheats? A faulty high-limit thermostat breaks the heating circuit to prevent damage. Easy 5-10 minute DIY replacement fix.
Do-It-Yourself Stories from Customers like You
Dryer would not start Homer G. • Meridian , MS • April 03, 2018
Replaced the themal fuse
Read more
More
$71.95
- Compare At:
-
$85.62
- You Save:
-
$13.67
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10192994
This replacement switch restores reliable on/off control for the specific function it serves in your appliance. A failing switch can cause that feature to stop responding or behave intermittently; replacing it brings normal operation back.
- Opens and closes the electrical circuit to the associated component when actuated
- Provides consistent, safe control of the feature it operates
- Typical failure symptoms: function won't turn on, won't turn off, or works only intermittently
- Physical clues can include a loose or sticky actuator, heat discoloration, or visible arcing damage
What's included: 1 switch Install notes:
- Disconnect power at the breaker before servicing; allow hot surfaces to cool
- Access the switch per your model's service/parts diagram and note wire positions
- Transfer wires one at a time to the new switch; secure any mounting hardware
- Verify continuity and test operation before reassembly; replace any damaged connectors
Do-It-Yourself Stories from Customers like You
Washer would not start running thought door was open C. D. • Austin , TX • April 28, 2017
This switch fixed a very frustrating problem, 75% of the time the washer refused to run because it "thought" the door was open. Replacing the switch was a very easy, in expensive, 5-min fix. The washer runs like new.
When taking off the gasket, there is a metal ring that holds the gasket in place. It is connected by a spring. Find the spring, put a flat head screwdriver between the spring and the gasket and pull the ring off. The gasket will then peel back, giving you access to the switch and...
Read more
More
$36.95
- Compare At:
-
$43.97
- You Save:
-
$7.02
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002792
Burner won't spark or ignite? This surface burner ignition switch triggers the spark module when you turn the knob. 45-minute DIY repair for ranges.
Do-It-Yourself Stories from Customers like You
Igniter switch shorted out Jeff J. • Hoffman Estates , IL • October 11, 2016
Replaced switch assembly
Read more
More
$102.32
- Compare At:
-
$121.76
- You Save:
-
$19.44
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74009254
The fan control switch is the panel-mounted switch that sends power to the appliance's fan motor. Replacing a worn switch restores reliable on/off control and proper airflow so the fan starts and stops when it should.
- Provides user-operated on/off power to the fan/blower motor
- Helps regulate airflow for cooling, venting, or convection depending on model
- Typical symptoms: fan won't run, runs continuously, intermittent operation, or a loose/broken switch shaft
- Mounts behind the control panel and is actuated by the exterior knob/lever
What's included: One fan control switch Install notes:
- Disconnect power at the breaker before servicing
- Remove the control knob/actuator and panel trim to access the switch
- Note wire positions or take a photo; transfer wires one at a time to the new switch
- Secure with the original hardware, restore power, and test operation
Do-It-Yourself Stories from Customers like You
The fan switch on our jenn air cooktop broke Jonathan B. • Bend , OR • March 29, 2015
After looking at several YouTube videos that were only moderately helpful for my particular model, I disconnected the power at the breaker, disconnected the wires below the cooktop to the junction boxed lifted the whole unit out, including the fan assembly. I flipped it upside down and took off the screws holding the unit to the glass top. Although the new fan switch did not look the same as the original switch, the new switch does fit. The new switch did not come with a hex nut. The old hex...
Read more
More
$135.31
- Compare At:
-
$161.02
- You Save:
-
$25.71
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304482236
If your hood won't turn on or respond to controls, this switch may have failed. Requires removing the grease filter and lower pan to access and replace.
More
$125.95
- Compare At:
-
$148.62
- You Save:
-
$22.67
Genuine Whirlpool part
By: Whirlpool
Part Number: W10702726
Dryer won't start but lights work? A faulty door switch prevents operation. This replacement switch restores normal function in under 10 minutes.
Do-It-Yourself Stories from Customers like You
Broken door switch Jason D. • Troy , IL • March 23, 2019
Ordered replacement, easy swap out. Less than 10 minutes.
Read more
More
$60.52
- Compare At:
-
$72.62
- You Save:
-
$12.10
Genuine Ge part
By: Ge
Part Number: WH12X10510
Washer won't respond to cycle selections? This selector switch mounts behind the control knob to restore reliable setting changes. Easy DIY fix.
More
$27.79
- Compare At:
-
$33.07
- You Save:
-
$5.28
Genuine Whirlpool part
By: Whirlpool
Part Number: WP35001087
Dryer won't heat or start? A failed thermostat breaks the heating circuit. Common DIY fix—test for continuity with a multimeter. Typical repair time: 30-60 minutes.
Do-It-Yourself Stories from Customers like You
Dryer would not get hot William D. • Salem , OR • February 03, 2015
Changed Thermistor, Thermostats and the Thermal Fuse Assembly. I did not remove drum, so squeezing my hands in-between drum and vent hose pipe to remove screws was a tight fit, but doable.
Read more
More
$50.57
- Compare At:
-
$59.67
- You Save:
-
$9.10