Lid Parts

The Dispenser is an OEM part for Whirlpool dishwashers, integral to the appliance's operation by dispensing detergent and rinse aid during the wash cycle. This component ensures that the right amount of cleaning agent is released at the correct time, contributing significantly to the effectiveness of each wash.

Causes of dispenser failure include cracked internal components from repeated door openings, mineral buildup clogging dispenser parts, or electrical malfunctions preventing dispensing functions. 

Symptoms of a malfunctioning dispenser include:

• Detergent not being released during the cycle
• Rinse aid leakage or inconsistent dispensing
• The dispenser door sticking or failing to open

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Diverter Cover is an OEM replacement part for Whirlpool dishwashers. It is a protective plastic shield that covers the diverter valve, which controls the path of water flow during different wash cycles. The cover helps protect internal components from debris while allowing the valve underneath to operate smoothly.

Causes of a bad diverter cover can include cracks or breaks due to impact, loosening of mounting screws over time, or discoloration and wear of the plastic material.

Symptoms of a bad diverter cover include:

• Leaks from the diverter valve area
• Difficulty with water diversion during cycles
• Reduced spray pressure or coverage inside the wash compartment
• Debris accumulating near the valve mechanism

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This cover closes a designated opening on the appliance, shielding internal components and preserving proper operation. Replace a cracked, warped, or missing cover to restore a secure fit and protect the mechanism beneath.

• Shields internal components from dust, debris, and accidental contact
• Provides a finished closure to help maintain the appliance's intended containment/airflow
• Keeps underlying parts properly seated and protected during operation
• Symptoms indicating replacement: cracked or missing cover, broken tabs, loose fit, rattling/vibration, exposed components

• Disconnect power; turn off the water supply before servicing
• Keep track of orientation and retain original screws/clips for reinstallation
• Align and seat the cover fully; engage tabs and tighten fasteners snugly without overtightening
• Restore power and run a brief check to ensure secure fit and quiet operation

The Dispenser Cap is an OEM part for Frigidaire dishwashers. It is a crucial component of the detergent dispensing system, designed to securely cover and seal the detergent dispenser when the dishwasher is not in operation.

Symptoms of a bad dishwasher dispenser cap:

• Leakage of water or detergent from the dispenser area
• Difficulty in opening or closing the dispenser cap
• The cap not sealing properly, allowing moisture or debris to enter
• Cracks or damage to the cap, preventing a secure fit

Causes of a faulty dishwasher dispenser cap can include wear and tear over time, exposure to high temperatures or harsh detergents, or physical damage from mishandling or impact.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models. 

The Dispenser Cover Kit is an OEM replacement part for  Whirlpool dishwashers. It includes both the outer lid that protects the detergent and rinse aid compartments as well as the latch mechanism securing it closed. This dishwasher dispenser kit included the cover, lid hinge pin, spring, snap, and latch.

Causes of a bad dispenser cover can include wear and tear from frequent use, physical damage from accidental impact, and discoloration or warping due to exposure to sunlight or heat.

Symptoms of a bad dispenser cover kit include:

• Cracks or breaks in the cover
• Discoloration or yellowing of the plastic
• The cover not fitting securely or becoming loose
• Difficulty in using the dispenser controls due to a damaged cover

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Water Filter Cover is an OEM part for Whirlpool refrigerators. This cover encases and protects the water filter, ensuring it remains secure and clean while also blending seamlessly with the refrigerator's interior design.

You should replace the water filter cover if it becomes damaged or fails to secure the filter properly. Common causes of a bad water filter cover include physical damage from accidental impact, wear and tear from regular use, or warping due to temperature fluctuations.

Symptoms of a bad water filter cover include:

• Cracks or visible damage to the cover
• Difficulty securing the water filter
• The cover not fitting properly or coming loose
• Leaks around the water filter area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Detergent Lid Pin is an OEM part for Whirlpool dishwashers. This pin plays a crucial role in securing the detergent dispenser lid, ensuring that it opens and closes correctly during the washing cycle. This dishwasher detergent lid pin is also included in the cover kit 4387043.

Over time, the detergent lid pin can wear out or break due to regular use, exposure to harsh detergents, or accidental force. When the pin is damaged, it can cause the detergent lid to malfunction, leading to improper dispensing of detergent and reduced cleaning performance.

Symptoms of a bad detergent lid pin include:

• The detergent dispenser lid not staying closed
• Detergent not being dispensed correctly during the wash cycle
• Visible damage or wear on the pin
• The dispenser lid not opening or closing smoothly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Cover Outlet-Perforated is an OEM part for Speed Queen dryers. It functions as a protective cover, allowing proper airflow while preventing debris or foreign objects from entering the exhaust system. This part is designed to ensure efficient air circulation during the drying process, aiding in optimal dryer performance.

Causes of a bad Cover Outlet-Perforated can include physical damage due to wear over time, exposure to high heat cycles, or accidental impacts. Cracks or breaks in the cover may also result from improper handling during maintenance or cleaning.

Symptoms of a bad Cover Outlet-Perforated include:

• Reduced drying efficiency or extended drying times
• Visible cracks, warping, or other damage to the cover
• Accumulation of lint or debris around the exhaust area

This OEM Speed Queen part is also compatible with Alliance laundry equipment.

The Lint Filter Cover is an OEM part for Frigidaire dryers. This part protects and houses the lint filter. The cover also prevents items from falling into the lint trap area, which could potentially cause blockages or damage to the dryer. 

Causes of a bad Lint Filter Cover can range from physical damage due to accidental impact or improper handling, to normal wear and tear from repeated use.

Symptoms of a bad Lint Filter Cover include:

• Difficulty fitting the cover into its slot, which may indicate warping or damage.
• Visible cracks or breakage on the cover, compromising its ability to secure the lint filter properly.
• Increased lint buildup outside the filter area, suggesting that the cover is not sealing correctly.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This Washer Lid is an OEM replacement part for Speed Queen washers. It serves as the main cover and provides access to load and unload clothes during washing and rinsing cycles. The lid must be sealed tightly to minimize noise and ensure optimal energy efficiency.

Causes of a bad lid include long-term exposure to heat and moisture during use, impact or other physical damage.

Symptoms of a bad lid include:

• Excessive noise during spinning or agitation cycles
• Long wash times and higher energy bills due to leaks
• Difficulty opening or closing the lid securely
• Warping or bulging appearance

This OEM Speed Queen part is also compatible with American Dryer Corporation and Continental clothes washers.

The Water Filter Bypass is an OEM part for LG refrigerators. It is used when you choose not to use a water filter in your refrigerator. This bypass plug allows water to flow directly to the dispenser and ice maker without being filtered, ensuring continuous operation even when a filter is not installed.

Causes of a bad water filter bypass can include damage to the bypass plug, clogging from debris, or wear and tear over time. If the bypass plug is not functioning properly, it can disrupt the water flow and lead to issues with the ice maker and water dispenser.

Symptoms of a bad water filter bypass include:

• Reduced water flow or no water flow to the dispenser
• Ice maker not producing ice
• Water leaks around the bypass plug area

This OEM LG part is also compatible with Sears/Kenmore.

The Cage Roller Bearing Assembly is an OEM component for GE dishwashers. Located within the dishrack framing, it facilitates smooth travel of racks in and out during cycle operations. 

Causes of a faulty bearing assembly commonly relate to years of enduring cycle vibrations and intermittent loads from rack movements. Hard water exposure poses an additional risk of mineral deposits increasing friction over time.

Symptoms include:

• Snagging or jamming issues when sliding racks 
• Louder than typical operation noises within cycles
• Potential rack misalignments or difficulty extending fully

This genuine GE assembly is also compatible with other GE, Hotpoint, RCA, and some Kenmore models.

The Dispenser Lid is an OEM replacement part for Whirlpool dishwashers. Located at the top of the dishwasher door, it provides access to add detergent and rinse aid to the internal dispenser compartment below.  This dishwasher soap dispenser lid is included in the dispenser cover kit 4387043.

Causes of a bad dispenser lid can include wear and tear of hinge points from years of repeated openings. Cracks may also arise in the plastic material.

Symptoms of a bad Dispenser Lid include:

• Difficulty fully opening or closing the lid securely
• Leaks or spills occurring from around the sealing edges
• Potential cracks that compromise lid integrity or function
• Hinges that are loose or fail to support the lid in position

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Amana, and some Kenmore models.

The Dispenser Assembly is an OEM part for Frigidaire dishwashers. It is responsible for dispensing detergent and rinse aid during the dishwashing cycle, ensuring that the correct amounts are released at the appropriate times for optimal cleaning and drying performance.

Causes of a bad dispenser assembly can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process. These issues can prevent the detergent or rinse aid from being properly released.

Symptoms of a bad dispenser assembly include:

• Improper dispensing of detergent or rinse aid
• Insufficient cleaning or rinsing results
• Leaks or drips from the dispenser area
• The dispenser door not opening or closing correctly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Canopy Mica is an OEM part for GE microwaves. This part covers the waveguide channel, preventing food particles and grease from entering the microwave's internal mechanisms.  

Causes of a bad canopy mica can include exposure to high levels of moisture or grease, physical damage such as cracks or burns, and general wear and tear over time.  

Symptoms of a bad canopy mica include:

• Sparks or arcing during microwave operation
• Burn marks or discoloration on the mica sheet
• Unusual noises while the microwave is running
• Uneven cooking or heating of food

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Outer Door Panel is an OEM replacement part for Frigidaire washing machines. It serves as a protective barrier for the washing machine's door assembly, safeguarding the internal components and ensuring that the machine operates efficiently. The panel is designed to withstand regular use, providing durability and stability to the entire door assembly.

Causes of a bad Outer Door Panel can include physical impacts leading to dents or damage, wear over time affecting its structural integrity, or issues with the fittings that secure the panel in place. A damaged or compromised outer door panel can affect the machine's ability to operate effectively.

Symptoms of a malfunctioning Outer Door Panel include:

• Visible damage or warping of the panel
• Issues with the washing machine's door closing or sealing properly
• Unusual noises during operation due to a misaligned or damaged panel

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.