Power Strike Small Engine Safety Switch Parts
Genuine Lg part
By: Lg
Part Number: 6600JB3001C
Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.
Do-It-Yourself Stories from Customers like You
Micro switch replacement on LG lfx25991st refrigerator. Thomas V. • Temecula , CA • March 11, 2020
After my layman's diagnosis (hope) of a bad micro switch to the ice dispenser (would not activate and dispense ice through the chute) I purchased the both the ice and water dispenser micro switches (kill two birds with one stone). Albeit the video attached to these parts may be helpful to some it was not applicable to my refrigerator, as you could not access it from the front by removing the exterior dispenser plate. Don't try this on the LG, LFX25991ST series, refrigerator or you may break it...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134120900
Dryer won't start or shuts off unexpectedly? A failed thermal limiter is often the cause. This safety fuse prevents overheating. DIY repair in 30-45 minutes.
This part fixes the following symptoms
-
Shuts off too soon
-
Too hot
-
Takes too long to dry
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Worn bearing and felt causing dryer drum to rattle and creek Bay S. • Bothell , WA • January 05, 2016
Recommendations have fun and a bucket to prevent losing parts. First watch the videos, practice disassemble and reassemble the dryer drum. Make certain you have a good screw driver and spatula from kitchen (could not find my putty knife). Secondly, clean and inspect everything, make sure the motor bearing and belt pulleys are in good condition with little or no play. Third after you have confidently disassembled, vacuum cleaned, inspected all the worn parts, grease the motor and pulley,...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3949238
If your washer won't spin or drain, the lid switch may be broken. This safety switch prevents spinning when the lid is open. DIY repair in 5-15 minutes.
This part fixes the following symptoms
-
Won't start
-
Will not drain
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Broken lid switch assembly on washer. Linda Y. • Salem , OR • November 28, 2018
First, I ordered the wrong part (not paying attention to the model number on my machine...) I installed the part, following the very excellent video instructions from the website. I got the machine all put back together, but the electrical connection did not match!
So, just a few days from leaving on vacation, I chatted online with the representative, Robyn C., from AppliancePartsPros.com. She was so helpful, double checking that the model number of my machine matched the new part, and...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11384469
Refrigerator light won't turn off or on? The door switch detects when the door opens and closes. Easy 5-minute DIY repair with a pick tool or scraper.
Do-It-Yourself Stories from Customers like You
Fridge interior light kept going out Phil D. • Phoenix , AZ • June 16, 2014
Replaced door switch - it took less than 5 minutes - works perfectly
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10727360
Fix a microwave that won't start, runs with door open, or requires slamming the door. This door switch is a common fix for intermittent operation issues.
Do-It-Yourself Stories from Customers like You
Light flickering when open door & stays on when door opened Jo B. • Vandalia , OH • March 01, 2020
After checking other reviews, we decided it was best to replace the interlocks, cam and all three switches. You're going to need a phillips screwdriver, star driver, small screwdriver and needle nose pliers. You need to remove the ONE Phillips screw above the control panel inside the vent. The contol panel is on hinges that you can slide up and towards you. Using caution remove the wires noting how they're connected. Pinch the top of the white connectors and wiggle them free. We couldn't get...
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DC64-00519B
Washer won't start or shows door error? This door lock switch assembly fixes door latch issues. DIY-friendly repair with video guide, typically done in 15 minutes.
Do-It-Yourself Stories from Customers like You
Door wouldn't stay closed or locked. Richard J. • Key West , FL • July 27, 2017
Replaced door lock switch.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11700916
Fix a washer that won't start or stays locked with a new lid lock assembly. This safety latch secures the lid during cycles. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Lid wouldn't lock Ellen K. • Ballston Spa , NY • October 13, 2026
Our machine was giving an error that the lid wasn't closed. The lid was closed, but the lock mechanism wasn't working. We purchased a new lid lock assembly, latch strike assembly, and a new lid lock bezel. The repair was easy once we figured out what to do via YouTube videos. The hardest part was figuring out how to get the top part of the washer off. Our washer is working perfectly again.
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 12012913
Cracked or broken dishwasher handle? This door handle restores function. Requires removing inner door panel for installation. Video guide available.
Do-It-Yourself Stories from Customers like You
Recessed pocket door handle was cracked Michael P. • Dunwoody , GA • January 07, 2019
In order to replace this, you must remove the "outer door". This service manual is a pretty good reference (page 37):
http://members.msaworld.com/wp-content/uploads/sites/3/2017/02/2013-DW-Service-Manual.pdf
Note that this specific dishwasher has 12 screws that need to be removed before the outer door can be separated.
Once separated, don't even bother trying to push the broken handle out of the front as suggested. You will probably end up damaging the outer door. Instead, take some...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10117655
Dryer won't start when you push the button or stops running when released? This push to start switch fixes both issues. DIY-friendly, 5-15 minute repair.
Do-It-Yourself Stories from Customers like You
Dryer wouldn't start Kha L. • Reinholds , PA • December 20, 2015
The help tech helped me troubleshoot what the problem might be, and we narrowed it down to a faulty switch. He helped us pick the right part, and the video was helpful - it gave me the confidence that I could fix it myself. The part came, and it only took me 5 minutes to change out the switch. Now my dryer works great! I saved my wife $500 for a new dryer! :)
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10269458
Microwave displays 'close door' message or won't start? The door interlock switch is likely failed. Moderate DIY repair—replace all 3 switches together.
Do-It-Yourself Stories from Customers like You
Light flickering when open door & stays on when door opened Jo B. • Vandalia , OH • March 01, 2020
After checking other reviews, we decided it was best to replace the interlocks, cam and all three switches. You're going to need a phillips screwdriver, star driver, small screwdriver and needle nose pliers. You need to remove the ONE Phillips screw above the control panel inside the vent. The contol panel is on hinges that you can slide up and towards you. Using caution remove the wires noting how they're connected. Pinch the top of the white connectors and wiggle them free. We couldn't get...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820036
The Washer Door Switch is an OEM part for Whirlpool washing machines. This component is crucial for ensuring the washer operates safely by detecting whether the door is open or closed. The door switch prevents the washer from starting or continuing its cycle when the door is open, and it allows the machine to function only when the door is securely closed.
Symptoms of a failing Washer Door Switch include:
- The washer not starting or stopping unexpectedly during a cycle
- Error codes related to door closure issues displayed on the washer's control panel
- The washer door not locking properly or the lock mechanism not engaging
- The washer continuing to operate with the door open
Causes of a bad door switch can include wear and tear from frequent use, damage from repeated opening and closing of the door, electrical faults such as short circuits, or physical damage from mishandling or impact.
This OEM Whirlpool part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.
This part fixes the following symptoms
-
Will not drain
-
Pumps but will not spin
-
Timer will not advance
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Sometimes the washer wouldn't start the wash cycle when the fill cycle was done it would just sit until the lid was picked up or bumped Eugene N. • Roswell , NM • August 28, 2016
The lid shut-off switch is located behind the lid How About That. I order the plastic ball the hold the lid in place plus the lid shut off switch. I watched the video that AppliancePartsPros.com has on how to replace the lid and the plastic balls. I removed the lid to get to the two philips head screws to remove that part of the shut-off switch. I took the new switch out of the package and compared it to the old switch. I assembled the switch just like the old switch look using the new...
Read more
More
Genuine Ge part
By: Ge
Part Number: WH44X10288
Washer won't spin or shows flashing lights? This door lid lock ensures safe operation by securing the lid during cycles. DIY-friendly, 2-screw install.
Do-It-Yourself Stories from Customers like You
Washer lid of ge washer/dryer combo would not lock for spin cycle Joseph R. • Hicksville , NY • March 29, 2015
Replaced the lock lid mechanism.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 137032600
Dryer won't heat or start? This thermal fuse cuts power when temperatures get too high. Common fix for no-heat issues. Easy 30-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Electrolux dryer e64 error code Katherine S. • Apex , NC • January 05, 2015
I think I have a lemon of a dryer. I keep having to pay someone to replace my heating element about every year. So I already had the heating element, but I thought I would replace the thermostat and the limiter also. Yes, I am a 46 year old mom, and I replaced all three items. Thank goodness to youtube! Ha! I have ordered from you before and you always send promptly. Thanks!
Read more
More
Genuine Lg part
By: Lg
Part Number: 6931EL3001F
The Hi Limit Thermostat Assembly is an OEM part for LG dryers. This thermostat monitors and regulates the temperature within the dryer to prevent overheating, ensuring safe and efficient operation. It acts as a safety device that shuts off the heating element if the dryer exceeds a certain temperature, protecting the appliance and your home from potential fire hazards.
Over time, the hi limit thermostat can fail due to wear and tear, electrical issues, or repeated exposure to high temperatures. If the thermostat becomes faulty, it can lead to improper temperature regulation within the dryer.
Symptoms of a bad hi limit thermostat include:
- The dryer overheating
- The dryer not heating at all
- The dryer shutting off mid-cycle
- Extended drying times due to inconsistent heating
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Lg dryer no heat Jeffrey J. • Emerald Isle , NC • June 06, 2016
Checked and cleaned vent which was in need of cleaning, but not too bad (I do not consider this a primary causal detail, but can be a problem, so clean yours). Replaced Hi-Limit Thermostat (safety thermostat) after confirming the circuit was open with ohm meter. While I was in there, I completely cleaned the heater and ducting and internal workings of the dryer. Confirmed the heater coils were good via 20ohm, 20ohm, 40ohm readings (LG service manual has wrong readings). Two weeks later, same...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3148953
If your range burner won't adjust temperature or stays on high, the infinite control switch likely failed. Direct plug-in replacement, 15-minute DIY fix.
Do-It-Yourself Stories from Customers like You
Couldn't control the heat on the big burner it intermittently got red hot (and stayed there) Fred S. • Emerald Isle , NC • March 26, 2016
I first diagnosed the problem by replacing the burner control (Infinite switch) with one from a smaller burner (one that I knew worked fine). That seemed to solve the problem. I ordered the correct control for the big burner on Saturday night, it arrived Tuesday and installed it in less than 10 minutes using only a Phillips screwdriver.
Remember to unplug the stove before performing any service. Take this time to clean around and under the stove. (You know it needs it!)
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11050897
Dryer not heating or overheating? This high limit thermostat kit prevents overheating by cutting power when temperature exceeds safe levels. DIY repair.
Do-It-Yourself Stories from Customers like You
Dryer flame would go out after a few minutes Robert B. • Eben Junction , MI • June 05, 2015
Purchased, Igniter Kit, Gas Valve Coil Kit, and as a precaution Thermal Fuse and Cutoff-Tml. Was pretty confident the problem was the gas valve coil, but figured that why not just replace the other items while I had the unit apart. Researching and utilizing this site certainly helped me out in figuring what the problem may be. Watched the instruction videos which were very detailed and helpful. The replacement and repair was not that difficult and the work was done rather quickly. Doing...
Read more
More