Timer Number131436800 Parts
Genuine Ge part
By: Ge
Part Number: WE04X25281
Dryer won't shut off or advance cycles? A faulty timer control is likely the cause. This part controls all timed drying phases. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Timer switch failed to work Gary R S. • Janesville , WI • November 28, 2025
Ordered part from appliance parts pro,replaced and dryer is drying again
Read more
More
$86.95
- Compare At:
-
$104.34
- You Save:
-
$17.39
Genuine Lg part
By: Lg
Part Number: 6871W1N012B
This board controls electrical relays that manage various oven functions, mounted inside the range's control housing. Symptoms of failure include oven elements not heating, erratic temperature control, or complete loss of oven operation.
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
F7 error code not heating lg electric range Starr B. • Danbury , CT • January 24, 2016
We ordered the Pwb(pcb) Assembly,sub, Part Number 6871W1N012B & received the part the next day. I couldn't believe how fast. My husband was able to replace in 15 minutes. My oven worked again!
Read more
More
$161.95
- Compare At:
-
$191.10
- You Save:
-
$29.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 241705102
Freezer frosting up or refrigerator losing cooling? The defrost timer controls defrost cycles to prevent frost buildup. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
When refrigerator would go into defrost it would trip breaker John M. • Fort Myers , FL • November 01, 2020
I replaced the defrost thermostat and the defrost timer. That corrected the problem. Be careful when ordering your parts. I put in my model# and they gave me a defrost timer that was incorrect. I had to return at my cost and order the correct one. Don't assume because you put in your model# that the part is correct. On each part there is a box to put in your model# to check to see if it fits your model. Don't assume that because you put your model# in before that it fits. If not sure, call them...
Read more
More
$77.76
- Compare At:
-
$92.53
- You Save:
-
$14.77
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10331686
The Spark Module is an OEM replacement part for Whirlpool ranges. It is an electrical component that generates the spark needed to ignite the gas burners. By sparking consistently and reliably, the module allows the cooktop burners to ignite with each use.
Causes of a bad spark module can include normal wear and tear over time, exposure to moisture or residue, or issues with the electronic components that produce the spark.
Symptoms of a bad spark module include:
- Burners that will not ignite or light consistently
- Burners that ignite but then immediately go out
- Only some of the burners lighting while others do not
- A clicking sound coming from the ignitors but no visible spark
Note: For harness from spark module to igniters use part number 9756892.
This OEM Whirlpool replacement spark module is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Kitchen Aid range. The bake and broil burners would not ignite. Johnathon M. • Olympia , WA • January 05, 2022
I purchased a new igniter for the bake assembly and found that it, unfortunately, did not resolve my problem. I measured the resistance of the different points on the gas valve and it was reading within spec so I then purchased this spark module and it did the trick.
My gas range is a Kitchenaid kgsk901sss02. I had a LOT of trouble finding where the spark module is located, and eventually found a schematic that shows it's location behind the front control panel of the oven.
Upon taking the...
Read more
More
$226.54
- Compare At:
-
$269.58
- You Save:
-
$43.04
Genuine Whirlpool part
By: Whirlpool
Part Number: W11308431
Fix oven not heating, won't turn off, or overheating issues. Controls temperature, timer, and cooking modes. Common repair for heating problems.
Do-It-Yourself Stories from Customers like You
Bake mode did not work on oven technician told us the element was working but control module was bad Stephen W. • Windermere , FL • February 13, 2022
Replaced control module.
Read more
More
$250.71
- Compare At:
-
$307.66
- You Save:
-
$56.95
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3951702
This mechanical timer controls the sequence and duration of wash, rinse, and spin cycles in the washing machine. It advances through each stage of the cycle and signals the appropriate components to turn on and off. Replace this timer if the washer gets stuck on one cycle, skips cycles, won't advance, or fails to start.
Do-It-Yourself Stories from Customers like You
Whirlpool washer wouldn't drain Larry W. • Fairfax , VA • November 16, 2019
Based on an internet search, the likely problem seemed to be a bad timer-control switch because it would hum and click but not advance on a 17-year old washer. Repairman diagnosed the problem as a bad lid-switch-assembly and replaced it - problem solved. Now I need to return the Timer-Control.
AppliancePartsPros was very quick to ship the Timer-Control and have a great return policy for an unneeded part.
Read more
More
$192.95
- Compare At:
-
$229.61
- You Save:
-
$36.66
Genuine Whirlpool part
By: Whirlpool
Part Number: WP71001799
Display going dim or blank? Oven won't turn off or heat? The control board manages temperature, timers, and functions. Moderate DIY difficulty, 1 hour.
Do-It-Yourself Stories from Customers like You
Could no longer read clock or oven control features timers etc range is 17 year old jenn aire Kenneth H. • Chillicothe , IL • February 08, 2015
I followed troubleshooting guide and repair videos offered on website, ordered replacement oven control board and reinstalled unit using only a 1/4 inch nut driver. Easy fix for do it yourselfer in 15-20 minutes. Make certain to have model number of appliance when ordering. Parts are somewhat pricey but AppliancePartsPros. were much more reasonable than local parts supply houses or other sources plus they offered 1 year replacement even on electrical stuff.
Read more
More
$282.24
- Compare At:
-
$310.44
- You Save:
-
$28.20
Genuine Lg part
By: Lg
Part Number: EBR89296403
This is the main display control board for a range, housing the electronic circuitry that operates the oven's display panel, clock, and user input controls. It processes your temperature and cooking mode selections and relays commands to other components. Replace this board if the display is blank, flickering, showing error codes, or if the oven does not respond to control panel inputs.
Do-It-Yourself Stories from Customers like You
Missing display segments Travis J. • Fall Creek , WI • August 07, 2026
Replaced display board
Read more
More
$123.60
- Compare At:
-
$147.08
- You Save:
-
$23.48
Genuine Whirlpool part
By: Whirlpool
Part Number: W11701755
Dryer won't start or dial spins freely? This timer control regulates cycle length and component operation. Straightforward repair for most DIYers.
TIMER WITH KNOB
Do-It-Yourself Stories from Customers like You
Dryer done broke timer thing Jason H. • Otter Lake , MI • November 30, 2024
Ordered that there part from this place. Shipped quick like. Dryer ain't broke no more.
Read more
More
$69.95
- Compare At:
-
$82.54
- You Save:
-
$12.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10185976
Dryer runs but won't heat or won't stop at cycle end? The timer controls heating element power and cycle completion. Moderate DIY repair, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Timer wouldnt stop at the end of cycle then it quit heating Steve I. • Hulbert , OK • June 06, 2015
Used ohm meter on all thermostats and element.everything looked good.wasnt getting power to element unless you wiggled timer knob .ive used this website a bunch because it beats everyone else's prices
Read more
More
$104.34
- Compare At:
-
$128.45
- You Save:
-
$24.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8183196
This motor control board regulates the washer's drive motor, controlling spin speed and direction during wash and spin cycles. It is typically mounted near the bottom of the washer behind the front or rear access panel. Replace this board if the washer won't spin or agitate, stops mid-cycle, or if the motor runs erratically or not at all.
Do-It-Yourself Stories from Customers like You
Machine would not power up (panel would no light up) i did have some error codes displayed before that f 70 was one code Steven P. • West Roxbury , MA • August 19, 2014
After much reading on line regarding my problem. I decided to do any test that I could to try to diagnose and fix this myself if I could. This took a lot of time and patience to get the answers on how to go about this from "experts" as some of the info was contradictory. I was almost about to give up and buy a new washer with less electronic parts and buttons as advised by an honest appliance technician . I tried one more thing first which was to disconnect the lead wires connected to the MCU ....
Read more
More
$279.13
- Compare At:
-
$307.14
- You Save:
-
$28.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8557301
This is a 60 Hz electromechanical timer that controls the sequence and duration of wash, rinse, and spin cycles in a washing machine. It uses a small motor and a series of internal cams and contacts to advance the machine through each stage of the laundry cycle. Replace this timer if the washer gets stuck on one cycle, skips cycles, won't advance, or fails to start altogether.
Do-It-Yourself Stories from Customers like You
Timer control was not working Cornelio L. • West Covina , CA • April 19, 2014
I searched online and found Appliance Parts Pros to have the best price and an instructional video on how to replace this part. I've never done any type of repairs on a washing machine and figured I would give it a try. My washer is approx. nine years old and in good condition, and either I would repair this on my own or buy another. It took me about 30 min. to remove and replace the part, once this was completed I put the washing machine back into operation. Hurray!!!!!! did not have to spend...
Read more
More
$208.62
- Compare At:
-
$248.26
- You Save:
-
$39.64
Genuine Samsung part
By: Samsung
Part Number: DE92-02588G
Fix a blank display, unresponsive touchpad, or SE error code on your gas range. This control board restores oven functions in 15-45 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
The numbers on the key pad stopped working Charles G. • Bryan , TX • July 24, 2016
Unplugged the stove. Removed the back of the control panel. Removed and replaced the membrane keyboard and the main PCB. Reassembled the stove and everything was back to normal. The PCB was probably ok but I wanted to be sure and get the stove working as soon as possible so I replaced both parts at the same
Read more
More
$239.95
- Compare At:
-
$285.54
- You Save:
-
$45.59
Genuine Lg part
By: Lg
Part Number: AGL75172632
The Control Panel is an OEM part for LG dishwashers. It is the interface that allows users to select and control various washing cycles and settings on the dishwasher. The control panel includes buttons or a touchpad that sends signals to the dishwasher's main control board, ensuring the correct operation of the appliance.
Causes of a bad control panel can include electrical malfunctions, physical damage to the buttons or touchpad, or wear and tear from frequent use. Moisture intrusion or accidental impacts can also contribute to the failure of the control panel.
Symptoms of a bad Control Panel include:
- Unresponsive buttons or touchpad
- Inability to select or change cycles
- Error messages or flashing lights
- The dishwasher not starting or stopping unexpectedly
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Control board for the LG dishwasher was bad Rebecca G. • Chelsea , AL • March 04, 2021
When I ordered the control board the young lady told me that I had to take the front off the dishwasher. I did exactly as she said and started to put the new control board on. I could not unplug from the old one and finally my son came by and did that. I then put everything back together and turned it on. IT WORKED. Thank you. I should probably tell you that I am a 75 year old woman and if I can do it, anyone can.
Read more
More
$288.31
- Compare At:
-
$340.21
- You Save:
-
$51.90
Genuine Whirlpool part
By: Whirlpool
Part Number: W10756692
This motor control board is created for use with washing machines. It's located inside the washing machine, where users can change settings and start or stop the appliance. It is tasked with regulating how quickly the washer spins during a cycle. Wear and tear or damage can cause the motor control board to malfunction. This may make it impossible for the washer to agitate or spin. If this happens, a replacement will need to be made.To replace this part, start by unplugging the appliance. Once the area is safe, the bottom front panel should be removed. This will provide access to the original motor control board. Pull on the motor control board until the wires can be reached. The position of these components should be noted before taking out the part. Replace with a new motor control board and replace the wires.This motor control board is designed to fit washing machines made by Maytag, Whirlpool, Kenmore, and KitchenAid. This is an authentic OEM replacement part that is sourced directly from the manufacturer. It's sold as a single part.
Do-It-Yourself Stories from Customers like You
Whirlpool duet washing machine 7mghw9100mw1 with f06 error code Isaac G. • Mcallen , TX • November 03, 2014
We started getting the F06 code when on the normal cycle it was time to Rinse/Spin, pointing to a speed/tachometer issue on the motor. After several attempts of unplugging from power and restarting the cycle it would eventually start working for the rest of the laundry session. The Whirlpool technician after a brief look on the underside determined it was the motor and had to be replaced, even tough all troubleshooting tests on the motor were ok. I insisted that the probability was much higher...
Read more
More
$278.32
- Compare At:
-
$303.39
- You Save:
-
$25.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8299781
If your dryer won't heat properly or runs continuously without stopping, the timer may need replacement. Common DIY repair, moderate difficulty.
Do-It-Yourself Stories from Customers like You
It wouldn't heat and the timer wouldn't cut off until you opened the door Glenda E. • Belhaven , NC • March 11, 2015
My husband took the old timer out and replace it with the new. Now it worked fine. Being we order the other parts we decided to replace them.
Read more
More
$164.72
- Compare At:
-
$196.02
- You Save:
-
$31.30