We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
The Idler Pulley is an OEM part for GE dryers. This critical component helps to maintain the correct tension on the dryer's drive belt, ensuring smooth operation and preventing it from slipping.
Symptoms of a bad Idler Pulley include:
Causes of a bad idler pulley can include worn bearings, accumulation of lint and debris that impedes rotation, or material fatigue after prolonged use.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Repair went well, replaced the pulley wheel, belt, rear drum bearing. Had an issue after replacement with the dryer stopping after ~5mins or so when running with heat. Fluff cycle would run fine. Details: The lock nut on the pulley wheel didn't feel tight enough so i tried to crimp it back on the pulley arm. It then became way too lose. I had to replace it with a plastic washer I had in my toolkit. That fit snug and seems to work fine. I also added some grease to the pulley shaft under... Read more
Most orders arrive by Wednesday, November 25
Refrigerator not cooling evenly or making noise? The evaporator fan blade circulates cold air. Simple press-on installation in under 30 minutes.
It was after 11:00 at night a few nights ago, I couldn't sleep listening to the whining of the fan in the freezer, it was running and making noise sounding like waaoooww, waaaoww. It also sounded like grumbling of a garbage disposal. The refrigerator fan motor was so noisy it was keeping me up all night going on and off running really loud and about to fail. So I was desperate, and called AppliancePartsPros when I couldn't get to sleep near midnight because the fan was so noisy and Bud in... Read more
Replacement roller and axle kit for dishwasher lower racks. Includes 8 wheels and 8 axles. Replace when rollers are broken, cracked, or missing.
I never respond to these kinds of requests but I must respond to this one because of your superior service! The best story here was that I ordered the parts from AppliancePartsPros at 4:15 p.m. one day, and they were on my porch by 2:00 p.m. the next day!! I am very impressed, so please keep up the great work. I'll add that the prices were the best I found too. The dishwasher wheels replacement didn't require tools & took less than 15 minutes. The original design/materials are not very... Read more
The Lower Dishrack Roller and Axle Kit is an OEM part for GE dishwashers. This kit includes rollers and axles that attach to the lower dishrack, allowing it to slide smoothly in and out of the dishwasher for easy loading and unloading of dishes.
Causes of a bad roller and axle kit can include regular wear and tear from frequent use, damage from overloading the dishrack, or exposure to harsh cleaning chemicals. These factors can lead to the rollers or axles becoming worn, cracked, or broken, making it difficult to move the dishrack.
Symptoms of a bad lower dishrack roller and axle kit include:
I ordered replacement rollers and studs for my Ge Profile Dishwasher yesterday at 7:57am. I received the same today around 6pm! Snapped them into place in 5 minutes….They fit beautifully! I am truly amazed at not only how easy and thorough your website is but how lightening fast delivery is! I do a lot of on-line ordering and you all are the first to be so efficient and fast. My only question is …."How do you do it?!" Thank you for having excellence in what you do! Read more
Replacement roller and stud assembly for dishwasher racks. Installs on upper or lower rack to restore smooth gliding. Needed when rollers crack or studs break.
Ordered the clips that we easy to find on line. They can within a few days..and replaced them myself..didn't wait for my husband. Hardest part was getting the end caps off the metal rack to replace the rollers and clips. They fit in there spmehow. I used a screwdriver to get them out. Rest was a piece of cake Lol Read more
Fix a dishwasher that won't drain or keeps draining during fill. This solenoid armature controls the drain valve. DIY repair in about 45 minutes.
About a year ago my dishwasher during a cycle was emitting a horrible plastic burning smell. We stopped it mid-cycle, cleaned it out and tried to run a few more cycles after that and realized it wouldn't drain so it sat in my kitchen broken for a year. I finally got so fed up with washing dishes by hand that I took the whole dishwasher apart. Confirmed there were no blockages in any of the hoses etc. when it still didn't work I googled the problem, found this website and found that it must be... Read more
Idler pulley for dryer drum assembly. Maintains belt tension to enable smooth drum rotation. Replace if worn, cracked, or causing noise during operation.
The Dryer is 10 years old GE Front Load DPVH890JEMG. The drum would intermittently not rotate at the beginning of a cycle and occasionally would rotate but then start and stop throughout the cycle. I did not check error codes, but the windings on the motor were black. So it seemed reasonable that the motor was overheating and sending a signal to the control board to stop. There is one screw under the knob and 9 screws on the front to get inside. I decided to replace the bearings, capacitor,... Read more
Replacement roller and stud assembly for dishwasher lower rack. Installs on rack frame for smooth gliding. Needed when wheels are broken, cracked, or missing.
My daughter replaced the wheels. I showed her how to remove the old wheel and snap on the new ones. Easy fix that empowers her to try repairs on her own. Read more
Upper dishrack roller kit with 4 nylon rollers and 4 axles. Replace broken, cracked, or worn rollers that prevent smooth rack gliding in your dishwasher.
Removed and cleaned all inside components of dishwasher. Replaced the sump inlet and fine filter. I decided to complete the repair myself when my appliance repairman did not want to help me. The videos from Appliance Parts Pro are AMAZING!!!! Gave me the confidence to do the repair myself (had to fully uninstall the machine and flip it over). THANK YOU!!! Read more
Rattling noise or warm temps? A broken evaporator fan blade disrupts air circulation. This repair takes 30-45 minutes with basic tools and our video guide.
Replacement of the evaporator fan motor, fan blade, and grommets. The amount of disassembly to reach the part took most of the effort Read more
Refrigerator running hot or making loud noises? A worn condenser fan blade prevents proper airflow across coils. DIY repair in 30 minutes or less.
Condenser fan stopped on my big 2003 Monogram 4 foot wide ZIS480D Refrigerator. It is top mounted. The fridge had to be rolled out. 20 screws removed and the top sheet metal to get at the condenser. That was the only way to get at it. Works like new now. Read more
Turntable stopped turning or making grinding noise? This motor rotates the glass plate for even cooking. Easy 5-10 minute DIY fix with basic tools.
I fix this problem by purchasing a new turntable motor. Simple 5 minute installation. Read more
The fan blade circulates air and removes cooking odors and steam through the range hood's ventilation system. Located inside the range hood, replace it when the fan makes excessive noise, vibrates abnormally, or doesn't move air effectively.
I found the one at great price at Appliance Parts Pro. Fan came fast! TaDa fixed within days! Thanks!! Read more
The Blower Wheel is an OEM replacement part for GE dryers. It has a role in the air circulation within the dryer, aiding in the even and efficient drying of clothes. The blower wheel, connected to the motor, helps in expelling the moist air out of the dryer through the exhaust vent during the drying cycle. Causes of a malfunctioning blower wheel are typically wear and tear from regular use, the accumulation of lint or debris, or damage to the wheel’s fins or central hub, which can impact its rotation and air circulation capability. Symptoms of a bad Blower Wheel include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
New wheel didn't look different than the other wheel, but we put it on, it works and we're very happy. Read more
Replace broken or missing lower dishrack rollers and axles. Attaches to the bottom rack for smooth gliding when loading dishes. Sold as one roller kit.
I found my parts and ordered the six I needed, however I did not pick up on the difference from the front wheels to the rear wheels in the the descriptions. The rear wheels are narrower and I ordered all front wheels, six fronts instead of four front and two rear. I made it work by using the axle from the new wheel with two old narrow wheels. Read more
Freezer fan loud or not spinning? This evaporator fan blade circulates cold air over the coils. DIY-friendly repair with our video guide.
I had found that the fan in the freezer was making a lot of noise. Turns out the shaft was loose, causing the flan blade to wobble. Replaced the motor and fan and now it runs like a new unit. Read more