General Electric Leg Or Foot

The Pan Cover Wheel is an OEM part for GE refrigerators. It supports the movement of the fresh food section, allowing it to slide smoothly when accessing the refrigerator’s drawers.

Over time, the pan cover wheel can wear out or become damaged due to regular use, exposure to the weight of food items, or accidental impacts. If the wheel is faulty, it can hinder the smooth operation of the pan cover.

Symptoms of a bad pan cover wheel include:

• Difficulty sliding the pan cover in and out
• The pan cover not aligning properly or becoming stuck
• Unusual noises such as grinding or squeaking during movement
• Visible cracks or damage to the wheel

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This frame roller assembly mounts to the appliance frame and supports a sliding drawer or rack. Replacing a worn roller restores smooth, aligned movement and helps reduce sticking or grinding noises during operation.

• Provides rolling support for the sliding drawer/rack along the frame
• Helps keep sliding components aligned to prevent binding and uneven travel
• Reduces friction for smoother, quieter operation
• Typical symptoms: hard-to-slide drawer/rack, wobbling or scraping, visible roller damage

• Disconnect power; turn off water supply before servicing
• Remove the drawer or rack to access the frame-mounted roller assembly
• Note orientation; transfer any reusable hardware and secure the new assembly in the same position
• Verify smooth, level travel before reassembly and returning to service

The Range Leveling Leg is an OEM replacement part for GE ranges and ovens. It is designed to provide stability by allowing the appliance to be leveled on uneven floors. The leveling leg helps ensure the range sits securely, which is critical for even cooking and safe operation.

Over time, leveling legs can become damaged or worn due to frequent adjustments, heavy appliance movement, or environmental factors such as rust or corrosion. This can compromise the range's stability and cooking performance.

Symptoms of a bad leveling leg include:

• The range rocking or wobbling during use
• Difficulty achieving a level cooking surface
• Uneven cooking results due to improper range positioning
• Visible damage to the leveling leg

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This leveling leg is an authentic OEM replacement part sourced directly from the manufacturer. Leveling legs are used on the bottom of stoves to correct imbalances on the cooking top caused by floors being unlevel. The leveling leg is threaded so that it can be adjusted up or down as needed. There are four holes for leveling legs on the stove's bottom. Each leg can be adjusted independently. If the legs are missing or lost, these replacements will help level the stove for more even cooking. When the stove is not level, the food inside pans will be unlevel and not cook evenly.Make sure the power is disconnected before installing the leveling leg. Tilt the stove back and place a chock underneath one side so that the leg can be screwed up or down as needed. Remove the chock and check for level. If the stove is still unlevel, repeat the procedure on the side that is not level. Continue to adjust until the stove is level. Restore the power to the stove.This leveling leg is a black part that is sold individually. It is designed for use on ranges manufactured by General Electric, Kenmore, and Hotpoint.

This leveling screw adjusts your dishwasher's leveling leg so you can set the cabinet height and get the unit perfectly level. Proper leveling helps the door seal correctly, reduces rocking, and cuts excess vibration and noise.

• Threads into the leveling leg to raise or lower the dishwasher for accurate leveling and stability
• Helps prevent rocking or wobbling and supports proper door alignment and sealing
• Can reduce vibration/noise associated with an out-of-level installation
• Replaces a stripped, bent, or missing adjustment screw to restore adjustability

• Disconnect power and turn off the water supply; protect flooring before adjusting or replacing
• Remove the toe-kick/access panel to reach the adjuster; support the dishwasher's weight before turning the screw
• Start threads by hand to avoid cross-threading; do not overtighten
• After adjustment, verify level side-to-side and front-to-back with a level and recheck door operation

This leveling leg supports and stabilizes the refrigerator cabinet. Adjusting it keeps the unit level so doors align and seal correctly, helping reduce vibration and noise for smoother, more reliable performance.

• Threads into the base to support and level the appliance
• Allows height adjustment for proper door alignment and gasket contact
• Helps reduce rocking, vibration, and rattling noises
• Resolve issues like doors not closing fully, uneven gaps, or a wobbly cabinet

• Disconnect power and move the appliance carefully to access the leg
• Use a helper and protect flooring; tip the unit slightly and support it securely
• Unthread the old leg; hand-thread the new leg, then adjust as needed with a wrench
• Level front-to-back and side-to-side; avoid cross-threading or overtightening

This leveling leg threads into the base of your washer to set height and keep the cabinet stable on uneven floors. Replacing worn or missing legs reduces vibration, walking, and noise for smoother, safer operation.

• Provides an adjustable foot to level and support the washer
• Helps reduce vibration, rocking, and "walking" during spin
• Replaces stripped, cracked, or missing leveling feet
• Helps with excessive shaking, rattling noises, or out-of-balance conditions

• Disconnect power and water; pull the washer forward for access.
• Support the appliance to prevent tipping; unscrew the old leg by hand or with pliers.
• Thread the new leg into the base; adjust all feet until level front-to-back and side-to-side.
• Ensure each foot contacts the floor firmly and the cabinet is stable before use.

Adjustable

This mobility wheel is the small cabinet roller that helps your refrigerator glide for cleaning or service. Replacing a worn, cracked, or missing wheel restores smooth movement and supports proper leveling and positioning. What it does:

• Supports the base of the cabinet and allows the unit to roll when repositioning
• Replaces wheels that are cracked, flat-spotted, broken, or missing
• Common symptoms: refrigerator is hard to move, drags or scrapes, sits unevenly, or shows visible wheel damage
• Aids in pulling the appliance out for maintenance or cleaning

• 1 mobility wheel

• Disconnect power and shut off the water supply before moving the appliance
• Use two people and protect flooring; raise/adjust leveling legs to relieve weight from the wheel
• Access the base/roller bracket, remove the damaged wheel, and install the new wheel securely
• Lower and re-level the unit, reconnect utilities, and verify smooth movement

Rear bracket and leveling screw assembly.

This adjustable leveling leg supports and stabilizes your washer. Replacing a worn or missing foot helps the appliance sit flat on the floor, reducing rocking, vibration, and noise for smoother, safer operation. What it does:

• Threads into the base to set height and level the cabinet
• Provides a stable contact point with the floor to minimize movement
• Helps address excessive vibration, rattling, "walking," and out-of-balance issues when the washer isn't level
• Direct replacement for a damaged or missing leveling leg

• 1 leveling leg

• Disconnect power and water before servicing; move the appliance carefully to access the foot
• With assistance, tip or raise the unit as needed to reach the leg safely
• Unscrew the old leg; thread in the new leg by hand and adjust until the washer is level front-to-back and side-to-side
• Tighten the lock nut and recheck stability; run a test cycle to verify

This caster assembly supports the dishwasher at the base and lets the unit roll smoothly for positioning, cleaning, or storage. Replace a worn or broken caster to restore easy mobility and stable placement.

• Provides rolling support under the appliance for easy movement
• Helps position the unit properly when setting up or storing
• Reduces dragging that can scuff floors
• Typical failure symptoms include: hard to roll, wobbling/uneven stance, squeaking or scraping noises, and visible cracks or flat spots on the wheel

• Disconnect power and water supply; empty the dishwasher
• Protect the floor, then carefully tip or lay the unit to access the caster location
• Remove the mounting fastener(s), replace the caster assembly, and tighten securely
• Set the unit upright, verify smooth rolling and stable placement, then reconnect utilities

This leveling leg threads into the base of your appliance to provide a stable, adjustable footing. Replacing a worn or missing leg helps keep the cabinet level, reducing vibration and noise for smoother, safer operation.

• Adjusts height so the unit can be leveled on uneven floors
• Maintains solid floor contact to minimize rocking or walking
• Helps reduce vibration and rattling noises during operation
• Signs you need this part: appliance wobbles, sits unevenly, or a foot is missing/damaged

• Disconnect power; for gas units, also shut off the gas supply
• With assistance, carefully tilt or raise the appliance to access the leg
• Unscrew the old leg and thread in the new leg by hand; use a wrench if needed
• Level the unit front-to-back and side-to-side; ensure all legs firmly contact the floor

This replacement foot fits select GE microwaves. It provides a stable, cushioned contact point so the unit or its removable rack sits level, stays steady during operation, and helps protect surfaces from wear.

• Supports and cushions the microwave cabinet or a removable rack/accessory
• Helps keep the unit level to reduce wobble and vibration
• Protects interior and countertop surfaces from scuffs and marks
• Replaces missing, cracked, or flattened feet that cause rocking or rattling

• Disconnect power and allow the appliance to cool before servicing
• Remove the worn or missing foot and clean the mounting area
• Press or slide the new foot fully into place until secure
• The unit or rack sits level and stable before use

This wheel axle secures a small drawer, bin, or shelf wheel to its rail or bracket in compatible refrigerators, helping restore smooth gliding and proper alignment when the original axle is worn, cracked, or missing.

• Holds the wheel in place so drawers/bins roll smoothly along their tracks
• Helps maintain alignment and prevents wobble or binding
• Replace if the axle is broken, loose, or the wheel repeatedly falls off
• Symptoms can include stiff or uneven drawer movement, scraping, or a missing wheel/axle

• Unplug the refrigerator and remove food from the affected drawer/bin
• Remove the drawer/shelf to access the wheel and axle
• Use needle-nose pliers to release and remove the damaged axle; align components and press the new axle fully into place
• Inspect the wheel and track; replace any worn parts to ensure smooth operation

This leveling screw threads into the refrigerator's leveling leg or adjuster bracket to raise or lower the cabinet. Replacing a stripped or missing screw restores stable footing and helps keep doors aligned for proper sealing.

• Provides threaded height adjustment of the leveling leg/roller bracket
• Helps stop rocking or wobbling that can cause vibration and rattling
• Aids in door alignment so doors close and seal properly
• Replace if threads are stripped, screw is bent, seized, or missing

• Disconnect power and turn off the water supply before servicing
• Protect flooring; with assistance, carefully tip the appliance slightly to relieve weight from the adjuster
• Remove the damaged screw; hand-start the new screw to avoid cross-threading, then adjust until level
• Verify the cabinet is stable and doors operate correctly before restoring power