Lg Cogged Sump Filter Parts

• Will not drain
• Noisy

It was fairly obvious that the washer drainer motor had failed, water was not draining, filter was clean (bottom lower left panel door, have a pail ready!) and drain line was not blocked. Someone had provided great advice on the Appliance Parts Pro's site about replacing the drain motor from the bottom. Great suggestion! Easy to do, although be prepared for more water to drain from the washing machine onto the floor after you lay it over. I carefully lowered the machine onto it's back,... Read more

The original issue with the dryer is that a corner of the lint screen was sticking out of the lint screen guide, and it would not stay flush with the guide. As a result, many tank top straps, waistband strings, and blankets would get caught on this corner and twist, tear, or warp my clothes. When I did my research on the issue, I kept reading that it was an issue with the lint screen that came with the dryer. So I ordered the lint screen, guide, and cover that appliance part pros recommends to... Read more

I replaced the warped cover guide and the lint filter. Now it works perfect! Sears was going to charge $100 just to diagnose the well known problem, not including parts and labor. It only requires 4 screws(i used the old ones). Easy fix. Read more

I purchased a new replacement. Read more

We had a problem of lint building up inside of the filter slot. Once I took a long brush and cleaned the recess where the filter slides I was able to see that the old filter was not catching all the lint. Upon closer examination I noticed that the seal around the filter had become compressed. that's when I order another filter from AppliancePartsPros.com. My new filter came within three days and my dryer has been working fine ever since then. Read more

The original issue with the dryer is that a corner of the lint screen was sticking out of the lint screen guide, and it would not stay flush with the guide. As a result, many tank top straps, waistband strings, and blankets would get caught on this corner and twist, tear, or warp my clothes. When I did my research on the issue, I kept reading that it was an issue with the lint screen that came with the dryer. So I ordered the lint screen, guide, and cover that appliance part pros recommends to... Read more

I did a little research on the internet. Seems like this is a normal issue, perhaps caused by appliance age, not sure. Anyway, it’s easy to remove the lint trap holder on the LG dryer. I replaced the old with the new part, which fit good, but required a little strength and persistence but I was successful. The new “factory part” though has changed, and my old lint trap screen didn’t fit because of the design change. I was able to modify it by cutting off the ears so it would fit flush. Perhaps... Read more

I ordered one from you and replaced it. Read more

I ordered a new part and it came very quickly. It was nice to have my dryer back working! Read more

I took it apart and found the drain pump motor had come apart. I found appliancepartspros.com and read the reviews for this company. Customers were very satisfied with the parts and service. I ordered the parts (at a savings of over 30% from my local appliance store) and had them in 2 days (YES TWO DAYS). Totally excellent service. Put the washer back together and it works like new. The repair was very easy to do myself and saved me well over $100. I recommend your company to every do it... Read more

• Will not drain

Unscrewed the leaking filter and replaced with the new one. End of problem. Great service and prices at Appliance Parts Pros.com. This will be the first place I check whenever I need repair parts for any of our appliances in the future. Read more

First determined drain discharge hose was clear. Turned of power to dishwasher. I did not find it necessary to remove the dishwasher. I simply removed the lower service panel at the floor and was able to easily remove the defective pump, unplug it, replace the small rubber check valve flapper before the pump inlet and reinstall the new pump assembly. The dishwasher surprisingly cleans and runs quietly like new again although I found no excuse for the pump failure as it is well designed. Never... Read more

I ordered a new vario motor and a soap dispenser. I turned off the water and the breaker, disconnected the water line and the power at the front base of the unit, disconnected the drain hose from the garbage dispenser, and pulled out the dishwasher and laid it on a blanket on its face. I unscrewed and removed the plainly visible vario motor on the bottom of the machine and removed the cam from the shaft. I then used a needle nose plier to carefully turn the D-shaft on the new motor to exactly... Read more

When Microwaving food, the display panel would seem to act normal, but the typical microwave sound would be absent. No microwave action would occur. Eventually an F5 code would display. Problem was the upper door switch. Found it by opening up the cabinet, removing the display panel (1 screw and a couple of plugs) and testing all three micro switched with a meter. Two switches are for the door and one for some kind of ventilation flap. They are all in the same area. Go to YouTube to see... Read more

I replaced the filter cartridge that is located underneath the lower spray arm. The original filter cartridge had become completely blinded off, the filter media is a very fine mesh nylon fabric and it gets clogged up eventually with hard water scale and other non-soluble materials (including dishwasher detergent). When this filter gets plugged, too little water flows through to the pump to be recirculated during washing. Replacement is relatively easy, except for the awkward position of... Read more

Had to replace the drain pump and the PSB main board. Read more