Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Rubber door boot seal prevents water leaks between the washer drum and door. Replace if torn, cracked, or leaking during cycles. Confirm fit by model.
I noticed the rubber seal (bellow) was damaged near the bottom of the bellow. It looks like removing clothes from the machine had worn away and eventually ripped away some of the seal. This caused water to leak out the bottom of the door. I looked up the model number of my washer on the web and searched for the part number of the bellow. Once I found it I searched eBay, Amazon and a few other places for the part number and opted for Appliance Parts Pros. The part was reasonably priced and... Read more
Washer won't drain or pump keeps running? This drain pump circulates and removes water during wash cycles. Common DIY repair, typically 15-30 minutes.
The original pump was getting jammed intermittently, more and more often. I cleaned it out, but that didn't help the jamming. So I ordered a new pump. Have your new pump on hand and look at it to see how it attaches. The original pump, a different part number than the replacement, lasted about 7 years of almost everyday use, with multiple loads each day. My washer model Maytag MHW5500FW0 has the pump at the bottom back, in an awkward position. This took me about 2 hours due to the awkward... Read more
Washer won't drain or spin? A failed water pump is often the cause. This pump circulates and drains water during wash cycles. DIY repair in 1-2 hours.
There was a loud noise from my washer during the drain cycle. (The washer seemed to drain just fine.) It was pretty easy to determine that the noise was coming from the drain pump. (Which for my washer is behind the front lower inspection panel on the right side front.) I inspected the outside of the pump for any physical damage and verified no issues with the pump or the mounts. Everything seemed ok. I then checked the drain pump filter(You will need something to catch water if you do... Read more
Washer won't drain or shows F21 error code? The drain pump assembly removes water after wash cycles. DIY repair in 15 minutes with video instructions.
I have a 12 year old Kenmore Elite washer. One day, suddenly, I heard a grinding noise and the washer abruptly stopped. I called a repair service and was told it could be the bearings in the drum of this front-load washer, or it could be the washer's drain pump, which automatically shuts down when the drain pump fails. The repairman said, if it is the drum, it wasn't worth fixing for the age of this washer. It would cost $85 for him to come out and diagnose the problem, then if I decide to fix... Read more
Flexible door bellow seal prevents water leaks between drum and door on front-load washers. Replace if torn, moldy, or leaking. Verify fit by model number.
Luckily we planned ahead when building the laundry room, as we built a water catch basin and drain under the washer, but waking up to see 1-2 inches of water is never a good sign - even if it is contained. It appears that a sleeve of a shirt was accidentally caught between the door mechanism and the bellow seal. After a few hundred revolutions in the washer, the shirt knotted up and was torn free of its pinch - in doing so, it tore a quarter sized hole in the rubber bellow seal. This was,... Read more
Replacement door hinge for front-load washers and dryers. Attaches door to cabinet for smooth opening and closing. Needed when hinge is cracked or worn.
I ordered the new hinge and the cap they said would be needed, took the door apart and installed new hinge. Only problem, wish they told me I needed 4 of the caps, for one hinge and each cap was 11.95 x 4...pretty spendy. Fortunately I was able to reuse 3 of my worn ones for now. Read more
Rubber door boot seals the washer drum opening to prevent leaks. Replace if you notice water pooling, tears, or mold buildup. Confirm fit by model number.
Remove Top of washer Remove Top bracket that covers soap dispenser Disconnect plug that leads to the front control panel Remove 3 screws from underneath the bottom kickplate, remove kickplate Remove 2 screws holding Door, remove door Remove screws holding the front of the machine Using long Phillips screwdriver, loosen the screw that connects the metal wire band that encircles the rubber baffle on the Tub side, remove band Using needle nose pliers, remove the door side baffle ring by pulling... Read more
Fix water leaking into your washer between washes or continuous filling. This water inlet valve controls hot and cold water flow. Easy DIY repair.
I replaced the supply lines and mesh in-line filters. I made sure incoming water pressure was strong. I also cleared some debris from the internal drain filter down below. The F20 persisted. My plan was to start swapping out parts from the inlet on. I ordered the valve and got it in a day. Thanks to the schematics and videos on appliancepartspros.com, I was comfortable with the repair, and had confidence in my plan. The actual valve replacement took about 10 minutes. Bingo bango... Read more
Attaches the washer door to the cabinet for smooth opening and closing. Replace if hinge is cracked, broken, or door won't stay aligned or closed properly.
I watched the AppliancePartsPros.com video on the part and replaced the hinge according to the video. Nothing could be easier. Read more
Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.
With the video that was made from appliance pro.Help me out one hundred percent to understand what I was dealing with Read more
The Water-Level Pressure Switch is an OEM part for Whirlpool washing machines. It is responsible for detecting the water level inside the washer and communicating this information to the control board to regulate the filling and draining processes. This switch ensures that the washer has the correct amount of water for each cycle, contributing to efficient and effective washing.
You should replace the water-level pressure switch if it malfunctions or fails. Causes of a bad switch can include electrical issues, blockage in the pressure hose, or wear and tear over time.
Symptoms of a bad pressure switch include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
I contacted AppliancePartsPros and gave them my symptoms and failure codes and they were able to diagnose the problem and send the correct parts to resolve the issue. This is the 3rd or 4th time I've used their service since 2012 and they have been correct on each and every repair issue I've had. Many thanks for the professional advice and help! Read more
Flexible seal between washer door and drum that prevents leaks during operation. Replace if torn, cracked, bulging, moldy, or leaking. Confirm fit with your model number.
Replaced the bellow. Read more
Washer won't start or door won't latch? This door lock switch assembly detects if the door is closed. DIY-friendly repair with video guide included.
The washing machine would allow you to program it, and all the lights on the control panel would light up, but pressing start did nothing. I tried putting the washer in diagnostic mode, but was unable to do so. The machine was not showing any fault code. I originally thought it was a problem with the 'Start' button and I thought that I'd buy a replacement part from the original seller of the washer. I was told by the 'live help chat person' that the problem was likely in the washer user... Read more
The Hinge Pin Bushing is an OEM part designed for Whirlpool washing machines that is responsible for providing a pivot point for the hinge pin and ensuring the door opens and closes smoothly and securely. Over time, this bushing can wear out or become damaged, leading to issues with the door's alignment and opening.
Symptoms of a bad Hinge Pin Bushing include:
Causes of a bad hinge pin bushing can range from normal wear and tear to excessive force used on the door or lid.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Fix a washer door that won't lock or stay closed during cycles. This door latch assembly secures the door and allows cycles to start. DIY repair.
Did lots of internet research. Narrowed problem down to three things - door lock latch, control unit, and motor control unit. Figured out how to run the diagnostic test program, which showed a F22 (door lock) error. Removed and ohm tested the door lock (pins 1 & 3). Found door lock latch to be defective. ordered new one and installed it. YouTube video helped a lot. https://www.youtube.com/watch?v=_SjU6k5bpSs So far, so good. Have only done a few loads. New door lock latch tested fine. Read more
Broken or cracked dispenser drawer causing detergent leaks? Replace your washer's detergent drawer. Easy 90-second install, no tools needed.
Found the parts on appliance parts pros and ordered them. It was amazing one arrived the next day and the other just the day after that it was so quick! There wasn't any real assembly just pulled the old drawer out and put in the new one! Read more