Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Kenmore Power Snowblower Fuel Shut-Off Solenoid Parts

Best Seller
Kenmore Dryer Thermal Fuse
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3392519

Stop dryer downtime in its tracks — install the Whirlpool WP3392519 OEM Thermal Fuse in minutes.

OEM Quality Fast 1–2 Day Shipping* Free Tech Help

Why choose this fuse?

  • Guaranteed OEM: built by Whirlpool to Whirlpool specs — no risky aftermarket clones.
  • Broad compatibility: works with Whirlpool, Kenmore, Maytag, KitchenAid, Roper & more.
  • Quick delivery: over 94 % of APP orders arrive in 2 days or less.

Fixes these common dryer problems

Problem How the fuse is involved
Dryer won’t start Blown fuse interrupts motor circuit
No heat / not enough heat Heater circuit disabled for safety
Cycle ends early Over-temp trip stops cycle
Control panel dead Power to controls interrupted


4-step DIY installation (≈10 min)

  1. Unplug dryer and remove rear panel.
  2. Locate thermal fuse on blower housing.
  3. Transfer wires; secure new fuse with ¼-inch nut-driver.
  4. Clean the vent & lint path before testing to prevent repeat failure.

*Video tutorial below.

Ready to get heat back?
Click Add to Cart now & enjoy industry-leading 1–2 day delivery on

This part fixes the following symptoms
  • Won't start
  • Timer will not advance
  • No heat or not enough heat
  • Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You No heat   Dennis G. • Kearny , NJ • January 14, 2017

I did the recommended checks of parts as listed on the website. I would recommend as one other person did but I did not listen the first time and that is to check all the parts don't stop at the first part you find bad. As I had to make two orders paying shipping twice because I thought I found a bad part when testing the igniter but the thermal fuse was also bad and since in a different part of the machine I did not take the time to check it, bad mistake. Also one tool mentioned in the video... Read more

More
$16.95

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Best Seller
Kenmore Dryer Cycling Thermostat
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387134

Dryer not heating or overheating clothes? A faulty cycling thermostat may be the cause. Regulates heat levels during the drying cycle. Easy DIY fix.

This part fixes the following symptoms
  • Too hot
  • Timer will not advance
  • Takes too long to dry
  • Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You My 22 year old dryer just stopped getting hot   Michael M. • Brunswick , GA • November 04, 2015

After 22 years my Kenmore (Whirlpool) dryer stopped getting hot. So I went ahead and reviewed the videos and figured I could repair it myself. It should be noted that the only part that failed the Ohm test was the thermal fuse. However, I figured that since I have it apart, I might as well go ahead and replace the heating element and the cycling thermostat. Here is a rundown of what I did and how long it took: • Taking the back off and vacuum <1 minute • Finding the components (from the... Read more

More
$26.95

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Best Seller
Kenmore Refrigerator Water Inlet Valve
Genuine Frigidaire part
By: Frigidaire
Part Number: 242252702

Ice maker stopped working or water dispenser not flowing? This refrigerator water valve controls water to both. Easy 10-20 minute DIY fix with video.

This part fixes the following symptoms
  • Leaking
  • Ice maker not making ice
  • Not dispensing water
  • Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You Ice maker stopped making ice   Michael S. • Appleton , WI • June 23, 2020

On your chat box with Kelsey, I decided it was probably the valve and so ordered a water valve. It came next day! Before trying to install it, I wanted to confirm whether it was the valve or the icemaker, so I chatted again with Kelsey who gave me a useful test (manually pour water into the icemaker) that confirmed the icemaker was functional. So I thought it surely is the valve, so I removed the old valve according to the very helpful video on your website. When I opened the box with the new... Read more

More
$65.24

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Best Seller
Kenmore Dryer Gas Valve Coil Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 279834

Dryer won't heat or flame shuts off after 15 seconds? Gas valve coils control gas flow to the burner. Takes about 30 minutes to replace both coils.

This part fixes the following symptoms
  • Timer will not advance
  • No heat or not enough heat
  • Shuts off too soon
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You Flame to dry clothes would go out after about a minute and wouldn't reignite   Wendell M. • Brown Deer , WI • June 19, 2014

I'm starting with a quick background on my dryer. About 18 months ago the belt on the dryer started slipping and squealing. I had a can of belt dressing spray so I popped the top open and sprayed the belt. It actually worked for about a year before it started squealing again. For the next 6 months I had to spray it more and more often. Then the clothes stopped drying. Obviously, at this point, I had to get off my lazy ass and fix the dryer. Searched my dryer's model number on the internet and... Read more

More
$28.43

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Best Seller
Kenmore Dryer Thermal Cut-Off Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 279816

Dryer won't heat? This thermal cut-off kit prevents overheating and restores heat. Includes high limit thermostat and fuse. DIY repair in under an hour.

This part fixes the following symptoms
  • Timer will not advance
  • No heat or not enough heat
  • Too hot
  • Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You My 22 year old dryer just stopped getting hot   Michael M. • Brunswick , GA • November 04, 2015

After 22 years my Kenmore (Whirlpool) dryer stopped getting hot. So I went ahead and reviewed the videos and figured I could repair it myself. It should be noted that the only part that failed the Ohm test was the thermal fuse. However, I figured that since I have it apart, I might as well go ahead and replace the heating element and the cycling thermostat. Here is a rundown of what I did and how long it took: • Taking the back off and vacuum <1 minute • Finding the components (from the... Read more

More
$47.41

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Best Seller
Kenmore Dryer Thermistor
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8577274

Fix E1 error codes or overheating issues with this dryer thermistor. Monitors temperature to prevent shutdowns. DIY repair takes about 30 minutes.

This part fixes the following symptoms
  • Too hot
  • Shuts off too soon
See more...
Do-It-Yourself Stories from Customers like You First longer to dry then no heat in dryer   Bobbie M. • King George , VA • October 06, 2017

I am not an electrician, just a housewife with limited funds and a desire to DIY. I used the provided videos for knowing how to replace everything except the heating element which I just guessed based on other reviews and seeing how the other parts worked. Our dryer is 11 years old Whirlpool Gold HE and I have only ever cleaned the lint tray. My husband replaced the belt about five years ago and he did clean out the inside of the dryer. Started by ordering a thermal fuse because it was... Read more

More
$32.64

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Best Seller
Kenmore Dryer Hi-Limit Thermostat
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3977767

Dryer not heating or overheating? A faulty hi-limit thermostat cuts power to prevent damage. Common fix when heat cycles on and off unexpectedly.

Do-It-Yourself Stories from Customers like You Clothes dryer was not heating   Joseph N. • Dallastown , PA • December 07, 2016

I used the Appliance Parts Pros d.i.y. video to get some oversight on the repair; ordered the parts (heating element, Hi-Limit T-stat and Dryer Thermal Cut-Off kit). I unplugged the electric; disconnected the exhaust duct; moved the clothes dryer so that I could remove the back sheet metal panel. The electrical connection at the heater "Stacon" terminal was corroded and broken - an open circuit. This had happen about 10 years before and I was familiar with this problem. After removing the... Read more

More
$20.38

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Best Seller
Kenmore Hi-Limit Thermal Fuse
Genuine Lg part
By: Lg
Part Number: 6931EL3003D

The Hi Limit Thermal Fuse is an OEM part for LG dryers. This fuse is a safety device that protects the dryer from overheating by cutting off power to the heating element if the dryer’s temperature exceeds a safe limit. It ensures that the dryer operates within safe temperature ranges, preventing potential fire hazards.

Replace the hi limit thermal fuse if it becomes faulty due to wear and tear, a buildup of lint, or exposure to high temperatures over time. A malfunctioning fuse can compromise the dryer’s ability to regulate heat properly.

Symptoms of a bad hi limit thermal fuse include:

  • The dryer not heating
  • The dryer shutting off unexpectedly during a cycle
  • No response from the dryer when attempting to start a cycle
  • Extended drying times due to lack of heat

This OEM LG part is also compatible with Sears/Kenmore models.

This part fixes the following symptoms
  • No heat or not enough heat
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Lg dryer no heat   Jeffrey J. • Emerald Isle , NC • June 06, 2016

Checked and cleaned vent which was in need of cleaning, but not too bad (I do not consider this a primary causal detail, but can be a problem, so clean yours). Replaced Hi-Limit Thermostat (safety thermostat) after confirming the circuit was open with ohm meter. While I was in there, I completely cleaned the heater and ducting and internal workings of the dryer. Confirmed the heater coils were good via 20ohm, 20ohm, 40ohm readings (LG service manual has wrong readings). Two weeks later, same... Read more

More
$19.76

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Best Seller
Kenmore Dryer Thermal Cut-Off Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 279973

Dryer won't heat? This thermal cut-off kit prevents overheating by interrupting power to the heating element. Common DIY fix with basic tools in 1 hour.

This part fixes the following symptoms
  • Too hot
See more...
Do-It-Yourself Stories from Customers like You First longer to dry then no heat in dryer   Bobbie M. • King George , VA • October 06, 2017

I am not an electrician, just a housewife with limited funds and a desire to DIY. I used the provided videos for knowing how to replace everything except the heating element which I just guessed based on other reviews and seeing how the other parts worked. Our dryer is 11 years old Whirlpool Gold HE and I have only ever cleaned the lint tray. My husband replaced the belt about five years ago and he did clean out the inside of the dryer. Started by ordering a thermal fuse because it was... Read more

More
$46.35

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Best Seller
Kenmore Washer Water Inlet Valve
Genuine Lg part
By: Lg
Part Number: 5220FR2006H

Fix washer IE error or no water flow issues with this water inlet valve. Controls hot or cold water flow into wash drum. 15-minute DIY repair.

This part fixes the following symptoms
  • Will not stop filling with water
  • Leaking
  • Shuts off too soon
  • Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You Lg wm2487hwm laundry machine had cold water overflowing and intermittent cold water operation on lg   Bruce S. • Van Nuys , CA • December 13, 2015

Replaced the cold water valve unit (has 4 ports and 1 inlet) which is very straight forward; requires : 1 phillips screwdriver ~#2 1 needlenose plier, medium size 1 channel lock plier, medium size 1 marker pen 1 - cold water valve assembly # AP4445613 1 - hot water valve assembly #AP4441935 1 - water level pressure switch #AP4440713 an old towel or two for absorbing small amounts of water a cellphone / camera for making sure you have the... Read more

More
$34.64

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Best Seller
Kenmore Dryer Thermistor Temperature Sensor
Genuine Samsung part
By: Samsung
Part Number: DC32-00007A

Dryer not heating or drying inconsistently? A faulty thermistor causes temperature control issues. Direct repair—moderate difficulty, 30-45 minutes.

This part fixes the following symptoms
  • Takes too long to dry
  • Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You Samsung dryer model# DV42H5200EW would not heat no error codes otherwise operating normally.   James S. • Washington , DC • October 20, 2017

You can do this! Although an Art Director by trade, I like working with my hands. I’m adept at working with tools and following instructions. In today’s disposable society, I prefer fixing things. That said, this has to be the easiest repair I’ve ever attempted with the largest cost-savings versus hiring a professional. My brand new dryer had been in use fewer than six months (average 6 loads per week) when suddenly the dryer would not heat. The drum would spin, there were no error codes, and... Read more

More
$30.54

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Best Seller
Kenmore Washer Water Inlet Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: W11165546

Fix a washer that won't fill, fills slowly, or shows an LF error code with a new water inlet valve. Most DIYers complete this repair in 10-15 minutes.

Do-It-Yourself Stories from Customers like You The washer was not filling and displaying lf ("long fill") error code   Kalen D. • Valparaiso , IN • February 08, 2019

I removed the top of the washer, disconnected the existing inlet valve assembly, and replaced it with the part I bought from AppliancePartsPros.com. If it hadn't taken me 30 minutes to figure out how to remove the top of the washer (not the entire top, just the cover over the control panel area), this would have been a 5 minute repair. Read more

More
$69.95

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Best Seller
Kenmore Dryer Thermal Fuse
Genuine Samsung part
By: Samsung
Part Number: DC47-00016A

This thermal fuse is a safety device mounted on or near the blower housing inside the dryer. It is designed to blow and cut power to the dryer if the internal temperature exceeds a safe limit, preventing potential fire hazards. Replace this fuse if the dryer will not start or has no power at all - a blown thermal fuse is one of the most common reasons a dryer stops running completely.

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Samsung dryer model# DV42H5200EW would not heat no error codes otherwise operating normally.   James S. • Washington , DC • October 20, 2017

You can do this! Although an Art Director by trade, I like working with my hands. I’m adept at working with tools and following instructions. In today’s disposable society, I prefer fixing things. That said, this has to be the easiest repair I’ve ever attempted with the largest cost-savings versus hiring a professional. My brand new dryer had been in use fewer than six months (average 6 loads per week) when suddenly the dryer would not heat. The drum would spin, there were no error codes, and... Read more

More
$28.31

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Best Seller
Kenmore Refrigerator Water Inlet Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: W10408179

Ice maker not filling or water dispenser leaking? This water inlet valve regulates water flow to both. DIY repair typically takes 10-20 minutes.

This part fixes the following symptoms
  • Not dispensing water
See more...
Do-It-Yourself Stories from Customers like You No ice from a Kenmore (Whirlpool) side by side refrigerator   Eric R. • Studio City , CA • June 18, 2020

Our Kenmore (Whirlpool) refrigerator's ice maker had stopped making ice. I searched YouTube and found a repair videos for this exact problem, finding one with a similar refrigerator and the identical ice maker. I learned that the Water Inlet Valve had likely gone bad and would need to be replaced. In the video the tech pointed out the small rubber tube inside the freezer that comes down from the ceiling of the refrigerator into the ice maker. This tube feeds it the water to make ice with and... Read more

More
$78.78

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Best Seller
Kenmore Water Inlet Valve Assembly
Genuine Lg part
By: Lg
Part Number: 5221ER1003A

This three coil solenoid is used for the cold water, bleach dispenser and prewash.

Do-It-Yourself Stories from Customers like You The valve assembly started leaking so i ended up needing to replace it before too much water got on the inside parts or on the floor!   Benjamin M. • Lynchburg , VA • February 12, 2016

1. I unplugged the washer from outlet 2. I turned off the hot and cold water taps going to the washer (both just in case) 3. Draped a towel over back edge of washer and under where hoses coming from water outlets attach to back of washer (to catch any loose water out of the hose or screw nozzle leading to valve assembly, then unscrew (by hand) the cold water hose from back of washer (leave hot water hose alone as not needed). 4. Unscrew valve assembly from washer by two screws on back top of... Read more

More
$133.64

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Best Seller
Kenmore Refrigerator Water Inlet Valve
Genuine Ge part
By: Ge
Part Number: WR57X33326

Water dispenser won't shut off or no water flowing? This inlet valve controls water to your ice maker and dispenser. DIY repair in 10-15 minutes.

Do-It-Yourself Stories from Customers like You I changed the filter and the water flow ceased to the dispenser and the ice maker   John K. • Boynton Beach , FL • June 27, 2017

I seared the web and found Appliance Parts Pros site and when I input my GE refrigerator model number I was able to do some diagnostics on their site. It was indicated from my research that the Water Inlet valve most likely was at fault for my problems. I ordered the replacement valve from them and they shipped the same day as the order and it arrived the next day, faster than I had expected. I viewed their video and it was very good at explaining what I had to do to replace the valve on my... Read more

More
$84.52

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google