Tankless Water Heater Flow Sensor Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3392519
Stop dryer downtime in its tracks — install the Whirlpool WP3392519 OEM Thermal Fuse in minutes.
OEM Quality Fast 1–2 Day Shipping* Free Tech Help
Why choose this fuse?
- Guaranteed OEM: built by Whirlpool to Whirlpool specs — no risky aftermarket clones.
- Broad compatibility: works with Whirlpool, Kenmore, Maytag, KitchenAid, Roper & more.
- Quick delivery: over 94 % of APP orders arrive in 2 days or less.
Fixes these common dryer problems
| Problem |
How the fuse is involved |
| Dryer won’t start |
Blown fuse interrupts motor circuit |
| No heat / not enough heat |
Heater circuit disabled for safety |
| Cycle ends early |
Over-temp trip stops cycle |
| Control panel dead |
Power to controls interrupted |
4-step DIY installation (≈10 min)
- Unplug dryer and remove rear panel.
- Locate thermal fuse on blower housing.
- Transfer wires; secure new fuse with ¼-inch nut-driver.
- Clean the vent & lint path before testing to prevent repeat failure.
*Video tutorial below.
Ready to get heat back?
Click Add to Cart now & enjoy industry-leading 1–2 day delivery on
This part fixes the following symptoms
-
Won't start
-
Timer will not advance
-
No heat or not enough heat
-
Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You
No heat Dennis G. • Kearny , NJ • January 14, 2017
I did the recommended checks of parts as listed on the website. I would recommend as one other person did but I did not listen the first time and that is to check all the parts don't stop at the first part you find bad. As I had to make two orders paying shipping twice because I thought I found a bad part when testing the igniter but the thermal fuse was also bad and since in a different part of the machine I did not take the time to check it, bad mistake.
Also one tool mentioned in the video...
Read more
More
$16.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: 279838
Restore full heat and end long dry cycles - install the Whirlpool OEM Dryer Heating Element.
Why this heating element?
- Factory-spec 5400 W / 240 V heating element with nickel-chromium coil - built by Whirlpool to Whirlpool OEM standards.
- Broad compatibility: fits Whirlpool, Kenmore 110-series, Roper, Estate, Amana, Maytag & more 27-inch dryers.
- Built to last: high-temp terminals & mica insulation resist fatigue and hotspots.
Fixes these common dryer problems
| Problem |
How the element solves it |
| No heat / cold drum |
Replaces burned-out coil to restore heating circuit |
| Takes forever to dry |
Full wattage brings drum back to target temperature |
| Stops mid-cycle |
Prevents over-cycling caused by faulty element |
| Burning smell |
New coil eliminates hot-spot arcing & insulation burn |
DIY install — about 20 minutes
- Unplug dryer and remove back panel to access heater housing.
- Disconnect wires; remove housing screws and slide assembly out.
- Swap old element for new, re-use hi-limit thermostat if still good.
- Re-assemble, run test cycle - enjoy fast, even drying.
This part fixes the following symptoms
-
No heat or not enough heat
-
Doesn't shut off
-
Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You
My 22 year old dryer just stopped getting hot Michael M. • Brunswick , GA • November 04, 2015
After 22 years my Kenmore (Whirlpool) dryer stopped getting hot.
So I went ahead and reviewed the videos and figured I could repair it myself. It should be noted that the only part that failed the Ohm test was the thermal fuse. However, I figured that since I have it apart, I might as well go ahead and replace the heating element and the cycling thermostat.
Here is a rundown of what I did and how long it took:
• Taking the back off and vacuum <1 minute
• Finding the components (from the...
Read more
More
$58.43
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387747
Dryer not heating or clothes coming out damp? The heating element generates heat to dry clothes. DIY-friendly repair in about 30-45 minutes.
This part fixes the following symptoms
-
No heat or not enough heat
-
Takes too long to dry
-
Too hot
See more...
Do-It-Yourself Stories from Customers like You
First longer to dry then no heat in dryer Bobbie M. • King George , VA • October 06, 2017
I am not an electrician, just a housewife with limited funds and a desire to DIY. I used the provided videos for knowing how to replace everything except the heating element which I just guessed based on other reviews and seeing how the other parts worked. Our dryer is 11 years old Whirlpool Gold HE and I have only ever cleaned the lint tray. My husband replaced the belt about five years ago and he did clean out the inside of the dryer.
Started by ordering a thermal fuse because it was...
Read more
More
$59.48
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Frigidaire part
By: Frigidaire
Part Number: 316075103
Oven won't heat or bake properly? This bottom bake element converts electricity to heat for even baking. Simple DIY fix—2 screws, 2 wire terminals.
Do-It-Yourself Stories from Customers like You
Bake element caught on fire and burned until it broke apart at one spot Steve M. • Merritt Island , FL • July 04, 2014
It took no time to find where the problem was! I got my Frigidaire model number and got on-line with AppliancePartsPros.com where I have gone for over a decade for all my household repairs. Why? because they are honest, helpful, considerate, fast, and its easy to locate and SEE the exact part I need. 10 minutes after the burning of my element, one was in my cart and ordered! Done. TWO days later, the part arrived. I turned off the circuit breaker, unscrewed the two 1/4" screws and pulled off...
Read more
More
$37.36
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387134
Dryer not heating or overheating clothes? A faulty cycling thermostat may be the cause. Regulates heat levels during the drying cycle. Easy DIY fix.
This part fixes the following symptoms
-
Too hot
-
Timer will not advance
-
Takes too long to dry
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
My 22 year old dryer just stopped getting hot Michael M. • Brunswick , GA • November 04, 2015
After 22 years my Kenmore (Whirlpool) dryer stopped getting hot.
So I went ahead and reviewed the videos and figured I could repair it myself. It should be noted that the only part that failed the Ohm test was the thermal fuse. However, I figured that since I have it apart, I might as well go ahead and replace the heating element and the cycling thermostat.
Here is a rundown of what I did and how long it took:
• Taking the back off and vacuum <1 minute
• Finding the components (from the...
Read more
More
$26.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: W10779716
The Bake Element is an OEM replacement part for Whirlpool ovens. It is a component responsible for generating the heat necessary for baking and roasting operations within the oven cavity.
Symptoms of needing to replace the bake element include:
- Uneven or inconsistent baking results
- Difficulty in reaching or maintaining the desired oven temperature
- Visible damage or burnout on the element itself
- Unusual smells or odors associated with a faulty heating element
Causes of a faulty bake element can include normal wear and tear over time, electrical malfunctions, or physical damage due to impact or excessive temperature fluctuations.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore oven models.
Do-It-Yourself Stories from Customers like You
Oven temperature was very low and inconsistant James H. • Fallon , NE • July 23, 2017
I ordered the part I was sure I needed through the Appliance Pro website. I was surprised the part arrived in just two days. FIRST UNPLUG THE OVEN.. I removed the baking racks then two screws holding the plate over the element. I then removed three screws holding the old element in place, then gently wiggle/pull the element free from the electrical connections in the back of the oven. (Note: You cannot see the connections at this point. You'll need to remove the terminal block cover on the...
Read more
More
$52.68
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Samsung part
By: Samsung
Part Number: DC47-00019A
Fix a dryer that won't heat with a new heating element. Common causes include broken coils or cracked ceramic. Moderate DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
Samsung dryer no heat otherwise everything else worked Richard J. • Mechanicsburg , PA • October 25, 2016
Watched video. Took dryer apart to get to heating element and sensors.
In process found alot of lint had escaped into inner dryer and had a thick coating
over heating element. I cleaned out most lint and pulled apart lint trap on front and
cleaned out as much accumulated lint as possible. I then removed the heating element
(very simple, three screws in a support bracket) and found it was broke in one spot.(wire -
element severed). I believe the heavy lint build up on elements caused lint to...
Read more
More
$82.62
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: 279816
Dryer won't heat? This thermal cut-off kit prevents overheating and restores heat. Includes high limit thermostat and fuse. DIY repair in under an hour.
This part fixes the following symptoms
-
Timer will not advance
-
No heat or not enough heat
-
Too hot
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
My 22 year old dryer just stopped getting hot Michael M. • Brunswick , GA • November 04, 2015
After 22 years my Kenmore (Whirlpool) dryer stopped getting hot.
So I went ahead and reviewed the videos and figured I could repair it myself. It should be noted that the only part that failed the Ohm test was the thermal fuse. However, I figured that since I have it apart, I might as well go ahead and replace the heating element and the cycling thermostat.
Here is a rundown of what I did and how long it took:
• Taking the back off and vacuum <1 minute
• Finding the components (from the...
Read more
More
$47.41
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: W10518394
Dishes not drying or clean light blinking? This heating element heats water for sanitizing and drying. Moderate DIY repair, 20-60 minutes with video guide.
This part fixes the following symptoms
-
Not drying dishes properly
-
Not cleaning dishes properly
See more...
Do-It-Yourself Stories from Customers like You
Whirlpool dishwasher not fully cleaning or drying dishes. Andrew M. • Seattle , WA • January 05, 2020
My Whirlpool dishwasher (wdf520padm3) started leaving food on dishes and not drying dishes as well as it used to, even when I ran the 'high temp' and 'heavy' cleaning options. This started happening after about 3 years of operation. To try to diagnose the issue, I started the diagnostics cycle (see below for instructions on how to do this). However, the 'Clean' LED is also not working on my dishwasher, so I was unable to read the error code after the service cycle finished.
I decided to...
Read more
More
$46.35
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8577274
Fix E1 error codes or overheating issues with this dryer thermistor. Monitors temperature to prevent shutdowns. DIY repair takes about 30 minutes.
This part fixes the following symptoms
-
Too hot
-
Shuts off too soon
See more...
Do-It-Yourself Stories from Customers like You
First longer to dry then no heat in dryer Bobbie M. • King George , VA • October 06, 2017
I am not an electrician, just a housewife with limited funds and a desire to DIY. I used the provided videos for knowing how to replace everything except the heating element which I just guessed based on other reviews and seeing how the other parts worked. Our dryer is 11 years old Whirlpool Gold HE and I have only ever cleaned the lint tray. My husband replaced the belt about five years ago and he did clean out the inside of the dryer.
Started by ordering a thermal fuse because it was...
Read more
More
$32.64
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Ge part
By: Ge
Part Number: WB44X5082
Oven not heating or baking unevenly? This lower bake element restores proper oven temperature. DIY-friendly repair takes about 20 minutes to install.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven is too hot
-
Oven not heating evenly
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
The baking element on our 28 year old oven decided to quit on new year's eve while preheating we heard a loud crackling pop which was the element shorting out it bubbled and started smoking Cynthia B. • Waukesha , WI • January 06, 2015
Of course, these things always seem to happen on a holiday! Luckily we were not having guests for dinner - so quickly changed our eating plans for the evening. I went directly online and Googled "Bake elements for GE ovens". At first I did not think I would have luck finding this part because of the oven's age. AppliancePartsPros.com was one of the service dealers listed first and catered specifically to GE appliances and parts. So, I typed in the Model number and low and behold, a screen...
Read more
More
$52.68
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3977767
Dryer not heating or overheating? A faulty hi-limit thermostat cuts power to prevent damage. Common fix when heat cycles on and off unexpectedly.
Do-It-Yourself Stories from Customers like You
Clothes dryer was not heating Joseph N. • Dallastown , PA • December 07, 2016
I used the Appliance Parts Pros d.i.y. video to get some oversight on the repair; ordered the parts (heating element, Hi-Limit T-stat and Dryer Thermal Cut-Off kit).
I unplugged the electric; disconnected the exhaust duct; moved the clothes dryer so that I could remove the back sheet metal panel. The electrical connection at the heater "Stacon" terminal was corroded and broken - an open circuit. This had happen about 10 years before and I was familiar with this problem. After removing the...
Read more
More
$20.38
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8544771
Dryer not heating or taking too long to dry? This heating element restores heat. DIY-friendly repair, typically takes 15-20 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
No heat Dan R. • Woodruff , SC • November 30, 2018
First ran the built-in diagnostic tests. Got error code indicating that the inlet thermistor was open. Removed lower access panel and did continuity checks on the inlet thermistor, thermal cutoff and heating element. Even doing these checks is very difficult on this model due to the location of these parts and the limited access through the so-called access panel. But was able to get an open reading on the heating element, so I knew that at least that part was faulty. Could not get a reliable...
Read more
More
$89.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Lg part
By: Lg
Part Number: 6931EL3003D
The Hi Limit Thermal Fuse is an OEM part for LG dryers. This fuse is a safety device that protects the dryer from overheating by cutting off power to the heating element if the dryer’s temperature exceeds a safe limit. It ensures that the dryer operates within safe temperature ranges, preventing potential fire hazards.
Replace the hi limit thermal fuse if it becomes faulty due to wear and tear, a buildup of lint, or exposure to high temperatures over time. A malfunctioning fuse can compromise the dryer’s ability to regulate heat properly.
Symptoms of a bad hi limit thermal fuse include:
- The dryer not heating
- The dryer shutting off unexpectedly during a cycle
- No response from the dryer when attempting to start a cycle
- Extended drying times due to lack of heat
This OEM LG part is also compatible with Sears/Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Lg dryer no heat Jeffrey J. • Emerald Isle , NC • June 06, 2016
Checked and cleaned vent which was in need of cleaning, but not too bad (I do not consider this a primary causal detail, but can be a problem, so clean yours). Replaced Hi-Limit Thermostat (safety thermostat) after confirming the circuit was open with ohm meter. While I was in there, I completely cleaned the heater and ducting and internal workings of the dryer. Confirmed the heater coils were good via 20ohm, 20ohm, 40ohm readings (LG service manual has wrong readings). Two weeks later, same...
Read more
More
$19.76
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Ge part
By: Ge
Part Number: WR55X10025
Fix uneven cooling or defrost issues with a new temperature sensor. Most DIYers complete this repair in under an hour with basic tools and our video.
This part fixes the following symptoms
-
Fridge too cold
-
Too warm
-
Fridge runs too long
-
Freezer too cold
See more...
Do-It-Yourself Stories from Customers like You
Defroster in freezer not functioning causing the freezer to frost up and the fridge to not cool appropriately Eddie R. • Debary , FL • January 06, 2015
I unplugged the fridge and took all the food and shelving out of the freezer and then proceeded to take off the bottom sliding drawer rack on both sides off (4 Phillips head screws). Then took off the light bulb cover and then the light bulb. Then the back wall that covers the coils and tubes that the refrigerant runs through ( 2 screws with hex head). After sliding out the back wall I could see that the entire coil area was frosted and iced up. I took a blow dryer and melted all of it over...
Read more
More
$23.54
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: 279973
Dryer won't heat? This thermal cut-off kit prevents overheating by interrupting power to the heating element. Common DIY fix with basic tools in 1 hour.
Do-It-Yourself Stories from Customers like You
First longer to dry then no heat in dryer Bobbie M. • King George , VA • October 06, 2017
I am not an electrician, just a housewife with limited funds and a desire to DIY. I used the provided videos for knowing how to replace everything except the heating element which I just guessed based on other reviews and seeing how the other parts worked. Our dryer is 11 years old Whirlpool Gold HE and I have only ever cleaned the lint tray. My husband replaced the belt about five years ago and he did clean out the inside of the dryer.
Started by ordering a thermal fuse because it was...
Read more
More
$46.35
IN STOCK
Most orders arrive by Tuesday, November 24