Wa456drhdwr/Aa01 Parts

With the video that was made from appliance pro.Help me out one hundred percent to understand what I was dealing with Read more

Researched error code and symptoms on Internet. Disassembled washer back to get right part #, be careful they are different! Googled part # for OEM part, found AppliancePartsPros with competitive pricing and fast delivery, placed order on Wednesday, had it on Friday for a few bucks more. Got the part as expected, replaced, tested and success! No error code, fast wash cycle, happy better half! Read more

Ordered a new knob and took out little bits of the old one. Took the new knob and pressed it over the stump and presto works like new. Read more

Needed to replace washer counter balance. Also order shock absorbers in case they needed to be replaced, fortunately they didn't need replacement and will be returned. I used Appliance Parts Pros many time and always found them to be very helpful and the repair videos are very helpful. Read more

• Door latch failure
• Will not agitate

After watching the video it was strait forward. Just Pull the screws pop the lid swap the springs "grease them" and put it back together. I would suggest that you have a person help you mostly has a second pair of hands. The lid was over rear springs and it will save you some expletives to have the extra body. I had worn out springs and the load kept becoming unbalanced during spin cycles I just happened to coincide with the Lock mechanism failing. The motor drive for the lock stopped working.... Read more

Ordered a new leg from Appliance Parts & put it on. Read more

• Will not stop filling with water

This error code indicated faulty water level and wash cycles were exhibiting either no water or too much water. Saw utube vid using this part for this type of problem and so far the repair is working well. Part arrived in 2 days, it was the right part and the machine is working the way its supposed to so I'm very happy. The worst scenario would have been to hire a repair guy to rip me off for a "Johnson Rod" I didn't need. Read more

I first check the schematics to find the heat sensor. On my model it's c on the control panel. I checked the continuity on the orange and white wires. It showed some continuity but not much. I then went to the heater element and found the orange and white wires going to the thermistor. Turns out the heater element and thermistor need repalced. Read more

After lots of research online and considering buying a new washing machine, I finally came across a repair story on here, appliancepartspros.com. Someone with a similar washer and the exact same problem replaced the rods in the washer. So for under $60, it was worth a shot. The rods we took out looked the same as the ones we put in, but once we replaced them, the washer worked perfectly and we haven't had a problem since. Delivery was fast and the instruction videos made replacing them quick... Read more

First of all, I cannot believe that Samsung would actually think that putting the drain pump on the drum was a GOOD idea. The fix was easy, When I bought the washer off an individual, She told me that she was informed the drain pump needed replaced. So I did that. Pain in the a&* du to the location and trying to secure the bolts. It broke off after a week. I found out that Samsung put out a repair bulletin and a customer service rep from this site emailed it to me. After looking up the parts,... Read more

Ordered a new part and installed Read more

I replaced the part. Read more

• won't spin

New clutch assembly. Read more

Ordered a new part and installed Read more

For Samsung Washing clothes machine WA50F9A7DSP/A2 The large (about 1 inch) nut at the bottom of the tub that holds the tub onto the clutch/motor is NOT Appliance Parts Pros 6021-001573, described as NUT-HEXAGON M26 OD44 ZNDC1. This nut has a 24 mm internal diameter. It is marked ZNDC-1 MT26 70H on top of the nut and is left hand or reverse thread. It is slightly too small to thread onto the clutch shaft. THE CORRECT NUT has a 26 mm internal diameter. That is Appliance Parts Pros... Read more

The start button had been tricky to use. You had to push it in just a certain way to get the dryer to start. Eventually it was non-responsive. All other controls worked and there was no error code displayed. The repair was to replace the whole control board which cost around $100. Heavy sigh.. Be sure to keep track of all your screws. BTW it was not the thermal fuse. All the online videos say this is the first thing to look for when the dryer will not start. Be sure to check with the person... Read more