Tiller Parts

Handle won't stay locked in position? This tiller handle lever lock secures the handle to the frame. Simple repair restores safe operation.

This v-belt is a genuine Husqvarna part, sold individually. This v-belt can be used as a replacement part for a tiller. The purpose of a v-belt is to affix the pulley of the motor to the drive mechanism of the appliance so the wheels are rotated, and the appliance can be operated properly.The v-belt might have to eventually be replaced if it suffers damage that cannot be fixed through a simple repair process. A damaged v-belt should be removed and replaced by this genuine OEM replacement part before using the tiller again. It is a simple replacement process that will require only basic tools. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This v-belt is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

Drives tine rotation on front-tine tillers. Replace if worn, cracked, or slipping to restore proper tilling performance. Confirm fit with your model number.

Replace worn tine shaft bearings to restore smooth tiller operation. Essential when bearings are damaged or causing excessive noise. Verify fit with your model.

This replacement part is a pulley. This is a genuine replacement part made by Husqvarna. Pulleys are very common in different types of machinery. This part allows for other pieces to be connected and work together so that the machine can operate effectively. A new pulley might be needed if the user notices unusual noises coming from inside the machine. This can be due to a malfunctioning pulley system or damage inside the appliance. Due to the friction that this pulley experiences, it is not unusual for this part to need replacing after years of normal use. Be sure the engine is completely powered down before attempting to replacing this part. Work gloves are also recommended when working near the engine. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part which ensures proper fit.

This replacement v-belt is designed for use in select high-wheeled trimmers. The belt is responsible for driving the cutter head, and is sometimes called the drive belt or trimmer drive belt. It attaches to the axle and the cutter and as the belt rotates, it turns the cutter head so that it can do the trimming. Over time, this belt can become worn, stretched, or twisted. This will require a replacement in order to ensure peak performance of the trimmer. With this OEM trimmer v-belt replacement, it will be easy to get back to work. This genuine OEM v-belt is designed for use in trimmers from Husqvarna, Poulan, Craftsman, Roper, and Weed Eater. It is made of durable composite rubber material and includes a one-year warranty from the manufacturer against defects. Replacing the belt requires a screwdriver and pliers. Always allow the engine to cool completely and wear gloves for hand protection. Beware of pinching or crushing injuries when replacing belts and other tensioned parts. This belt is sold individually and does not include any hardware or additional components.

This control cable is a genuine Husqvarna part, sold individually. This control cable can be used as a replacement part in a tiller. This part allows the user to control the momentum of the tiller.The control cable in a tiller could be pierced, ripped, torn, punctured, frayed, eroded, or warped to the point that it cannot serve its typical function for the tiller, and if this occurs, the control cable should be removed and replaced by this genuine OEM replacement part in accordance with a properly sourced set of instructions.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This control cable is compatible with the following outdoor appliance brands: Husqvarna.

This recoil starter kit is a genuine Husqvarna part, sold individually. This recoil starter kit can be used as a replacement part for a tiller. This recoil starter kit comes with all of the components and fasteners required to facilitate a full replacement or a new installation of a recoil starter. The purpose of the recoil starter is to provide a mechanism such that the tiller can be powered on and the engine can be started through the pull-start system.The recoil starter kit might have to be ordered as a complete replacement for a recoil starter that is no longer working. If the recoil starter is chipped, cracked, punctured, eroded, or otherwise damaged to the point that it is no longer starting up the engine through the pull-start mechanism, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This recoil starter kit is compatible with the following outdoor appliance brands: Husqvarna and Poulan.

This is a quality gearcase gasket that is designed to be used on many models of tillers. The gearcase gasket seals the gaps found between the two halves of the gear case. It can also help prevent leaks, reduce the costs of maintenance, and will make your equipment safer to use. Over time, the gasket can break down, become warped, or otherwise sustain damage and will need to be replaced.Over time, the gearcase gasket can deteriorate and compress and will need to be replaced. Replacing the gasket requires taking apart the entire tiller. Remove the motor and take apart the transmission to check the condition of all the parts. Components in good shape can be cleaned, while the gearcase gasket and other malfunctioning parts should be replaced. Once this is done, the tiller will need to be reassembled.This gearcase gasket is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual part. The gasket is designed for use with tillers made by Husqvarna, Weed Eater, Poulan, and Poulan Pro. A socket set, wrench set, and screwdriver will be needed to replace the part.

Tiller won't move or wheels don't turn? The drive belt connects the engine crankshaft to transmission. Moderate DIY repair restores tiller mobility.

This depth bar is an authentic OEM part sourced directly from the manufacturer for use on tillers to allow the tiller to dig into the ground and tear it up. The depth bar reduces the forward movement speed of the tiller which can be beneficial when the ground is hard-packed. If the depth bar breaks, it should be replaced to keeps the tiller operating efficiently. The depth bar is located on the back of the tiller. Before removing and replacing it, make sure the spark plug is removed from the machine and is parked on a flat surface. Remove the screws holding the depth bar in place. Set the screws aside. Line up the new depth bar with the holes and insert the screws. Tighten the screws and put the spark plug back in place. This depth bar a heavy-duty metal bar that is sold individually. It is designed for use in tillers manufactured by Poulan, Jonsered, and Husqvarna.

This shock absorber is a genuine Husqvarna part, sold individually. This shock absorber can be used as a replacement part in a lawn mower. The purpose of the shock absorber in a lawn mower is to prevent excessive motion and vibration from the steering lever so that oversteering is avoided while the lawn mower is in operation.The shock absorber in a lawn mower might need to be replaced at some point within the typical lifespan of the appliance. If the shock absorber cannot function, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This shock absorber is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Jonsered, and Craftsman.

This is a spring that is used on many Husqvarna lawnmowers. The component is located in the middle of the retainer and at the drive disk on the rear-wheel drive system. The main purpose of the spring is to ensure proper tension is applied between the drive disk and the pinion gear. Through time or wear and tear, this spring can become damaged or break. If this occurs, the component will need to be replaced in order to use the lawnmower.A screwdriver, socket set, and work gloves will be needed to replace this part. Make sure the lawnmower is powered off and the spark plug has been removed. Take the lawnmower and place it on a solid and sturdy surface while working on it. Remove the wheel where the spring is broken and take out the pinion, pawl, and spring. All of these items can be replaced or the pawl and pinion can be reused with the new spring.This spring is made for several lawnmowers manufactured by Husqvarna. The component is sold on an individual basis. This is a genuine OEM replacement part that is sourced directly from the manufacturer.

Idler pulley for riding mowers. Guides and maintains tension on drive belts. Replace if pulley is cracked, worn, seized, or causing belt slippage issues.

Engine idler pulley for riding mowers. Guides and maintains tension on the drive belt. Replace if cracked, worn, or causing belt misalignment issues.