Need Help?
Call or text
This is an electrical clutch with cable. It is a replacement part for lawn mowers. The electric clutch connects to and engages the blade of the mower. It does this by transferring engine power to the drive train and is controlled by a toggle switch.The clutch may wear through normal use or can break in an accident or from misuse. If this happens, the mower will not run correctly and the blade may not start at all. To make this repair, some disassembly of the mower is required. Always wear protective gloves when working near the blade, allow the engine to cool completely, and disconnect the spark plug to prevent the engine from accidentally starting.This clutch is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. It is made to be compatible with equipment manufactured by Husqvarna.
Usually ships within 4 - 14 days
This genuine Husqvarna replacement part is a pulley 52 for use with riding lawn mowers. A properly functioning pulley is essential for the safe and reliable use of a riding mower. The pulley connects to the blade spindle assembly, and drives the blade when the belt travels around the pulley. The pulley may become worn out or damaged with extended use, necessitating replacement. Remember to check the pulley periodically to spot any wear or damage. This part is an identical replacement for a pulley that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for installation instructions. Additional tools may be needed for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with a variety of riding lawn mowers. Please note: original part number 2429634 is now obsolete, and manufacturer has replaced the original part number with this part.
Fix engine starting problems or rough idling on your riding mower with this carburetor valve stem. Controls fuel and air flow for proper engine operation.
Replacement idler pulley for riding mowers and tractors. Installs on the deck assembly to guide the drive belt. Replace if cracked, worn, or spinning roughly.
Hour meter for rear-engine riding mowers. Tracks engine runtime hours. Replace if display is cracked, broken, or no longer functioning properly.
This clutch cable is part of the clutch assembly that controls the drivetrain in a tiller. When the clutch is engaged, the cable works with a spring to draw the clutch plate away from the flywheel. When the clutch plate is moved from the flywheel, forward movement occurs. Disengaging the clutch stops the forward motion. Normal wear and tear can cause the metal parts of the cable to rust or corrode. This replacement part is simple to install and requires very little time.A screwdriver, scissors, and wrench are needed to remove and install the new clutch cable. Empty the fuel tank and remove the spark plug before working on the clutch cable. Remove the gas tank. Locate the end of the clutch cable inside the clutch lever bracket. Pull the cable out and remove the spring attached to the end. Install the new cable, retracing the steps used to remove the old cable.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual part. This clutch cable is designed to be compatible with tillers manufactured by Craftsman.
Tiller not digging or tilling properly? This tine assembly digs into soil to break up and cultivate ground. Direct fit replacement for multiple models.
Replace broken or bent tiller tines that fail to dig properly or cultivate soil effectively. Direct fit tine assembly restores ground penetration.
This carriage bolt is a self-locking bolt designed to be used in an unthreaded square or round hole. These bolts are used in outdoor lawn and garden equipment due to their ability to handle heavy weight loads.Carriage bolts are often used to join lawnmower handles to the base of the mower. Over time, the vibration of the lawnmower may cause the bolt to become loose. During routine maintenance, if the bolt is loose, use a wrench to tighten the nut holding the bolt in place. If the bolt is missing, this carriage bolt replacement can be installed. Push the bolt through the hole; if the fit is snug, it may need to be lightly tapped. Once the bolt is through the other side, thread a nut on the bolt. Tighten the nut with a wrench.This is a genuine OEM part sourced directly from the manufacturer. It is sold as an individual unit and does not come with the nut. This carriage bolt is designed for lawnmowers, snowblowers, and other outdoor lawn and garden equipment manufactured by Bolens, Craftsman, Cub Cadet, Huskey, Troy-Bilt, Turf Pro, MTD, Ryobi, and Mastercut.
Hex screw for lawn mowers and outdoor power equipment. Secures components and panels. Replace if stripped, rusted, or missing for proper assembly.
Metal carriage bolt that fastens components together on lawn mowers, snow blowers, and garden equipment. Replace if bent, rusted, or missing.
Hex screw fastener for lawn mowers and outdoor power equipment. Replace if lost, stripped, or damaged during maintenance. Sold individually.
Hex cap screw for securing components on lawn mowers, tractors, and outdoor power equipment. Replace if stripped, rusted, or missing hardware.
Replacement muffler screw that secures the muffler cover in place on lawn equipment. Needed when original screw is stripped, missing, or damaged.
Mounting screw for lawn tractors and tillers. Secures components and housings. Replace if stripped, rusted, missing, or damaged during maintenance.
Replace a missing, stripped, or damaged screw on your lawn mower or outdoor power equipment. Standard hardware piece for secure assembly and mounting.