Wall Oven Heating Element

This oven bake element heats the bottom of the oven cavity to bake and roast foods evenly. Replacing a damaged element restores proper oven heating so your range can reach and hold cooking temperatures. What it does:

• Heats the oven cavity from the bottom to brown and cook foods
• Common fix for ovens that won't heat or take too long to reach temperature
• Replaces elements that are visibly broken, burned through, or no longer glowing
• Helps eliminate uneven baking or cold spots caused by a failed element

• One bake element

• Disconnect power to the appliance at the breaker or unplug before starting any repair
• Handle element carefully; sharp edges and ceramic insulators can break
• Verify terminal connections are secure and avoid touching terminals while energized

This surface heating element replaces a damaged or nonworking stovetop burner to restore even heat for cooking. It fits most compatible electric ranges and gives you a direct replacement for a faulty top burner element. What it does

• Provides the heating element that transfers heat to cookware on the cooktop
• Restores proper burner heat when an element no longer warms or cycles correctly
• Helps eliminate uneven cooking or intermittent on/off heating from a failed element
• Works as a direct replacement for the corresponding top/burner element on compatible ranges

• Disconnect power to the range before removing or installing the element to avoid electrical shock
• Pull the element straight out of the terminal block; avoid bending terminals or damaging the receptacle
• Inspect the burner receptacle for damage and replace if corroded or loose
• After installation, test the element on low and high settings and watch for proper operation

This bake element is the oven heating element that produces the lower radiant heat used for baking and roasting, restoring even oven temperatures and consistent cooking results. What it does:

• Heats the oven cavity during bake cycles to cook food evenly
• Replaces a broken or visibly damaged element that won't glow or heats weakly
• Helps correct symptoms like no heat on bake, uneven baking, or error codes tied to heating failures
• Works as the direct replacement heating element assembly in compatible ranges and wall ovens

• One bake element

• Disconnect power to the appliance before starting any repair
• Allow the oven to cool completely and wear gloves to avoid cuts from sharp edges
• Access typically requires removing the oven cavity or rear access panel and disconnecting two terminal connectors
• Verify correct fit and secure electrical connections;

This 230V, 1500W radiant cooktop element replaces a damaged or non-working surface burner to restore even heating for compatible electric glass-ceramic ranges. Durable design for direct terminal connections on most Bosch-style cooktops. What it does:

• Heats cookware through direct radiant energy for stovetop cooking
• Replaces a cracked, non-heating, or intermittently working surface element
• Helps eliminate uneven cooking or zones that won't reach set temperatures
• Matches OEM electrical rating for safe, consistent performance

• One radiant element (230V, 1500W)

• Disconnect power at the breaker before inspecting or replacing the element
• Allow the cooktop to fully cool; element and glass surface can retain heat
• Verify terminal connections and secure mounting per range instructions

Large

This surface heating element replaces a failed cooktop coil to restore even, reliable heating for electric ranges. Designed to match original fit and electrical connections for straightforward replacement. What it does:

• Heats cookware when the range control is turned on to provide consistent cooking temperatures.
• Commonly replaces elements that fail to heat, heat intermittently, or do not reach expected temperatures.
• Also used when an element shows visible damage, burning, or breaks at the coil or terminals.
• Works with the range's existing burner receptacle and infinite switch to deliver power to the cooktop.

• Disconnect power at the breaker or unplug the range before starting any repair.
• Allow the cooktop to cool completely to avoid burns; wear gloves to protect hands from sharp edges.
• Remove the old element by gently lifting and pulling it from the terminal block; align and seat the replacement terminals fully.
• Do not overtighten nearby fasteners; verify proper electrical connection and that the element sits flat in the cooktop before restoring power.

This bake element is the oven's lower heating element that produces the consistent heat needed for baking. Replacing a worn or damaged element restores proper oven heating and improves cooking results. What it does:

• Heats the oven cavity from the bottom to provide consistent baking temperatures
• Replaces a burned-out or broken element that prevents the oven from reaching set temperatures
• Helps eliminate uneven baking or undercooked bottoms caused by a faulty lower element
• Works with the oven's existing control and safety systems to heat only when commanded

• Disconnect power to the appliance before starting any repair
• Allow the oven to cool completely and wear gloves to protect hands from sharp edges
• Typically installs from inside the oven or from the rear panel; keep track of mounting screws and wire connectors

This lower bake element assembly heats the oven cavity for baking and roasting so you can cook food evenly. It replaces a damaged or failed lower heating element to restore normal oven heating performance. What it does:

• Produces the oven's lower radiant heat used during bake cycles
• Common fix when the oven won't reach or hold set temperature
• Replaces elements that are visibly burned, broken, or arcing
• Helps correct uneven baking when the lower element is not working

• Disconnect power to the appliance at the circuit breaker before servicing
• Allow the oven to cool completely; handle the element carefully to avoid damage
• Inspect wiring and connectors for heat damage and secure connections during installation
• After installation, restore power and run a short bake cycle to verify correct operation

This convection element provides the oven's heating source for convection cooking, restoring even heat circulation and consistent baking results. It replaces a damaged or non-heating convection heating element to get your oven back to working condition. What it does:

• Heats the oven cavity to enable convection cooking and even heat circulation
• Replaces elements that are visibly burned, broken, or that no longer produce heat
• Helps resolve uneven baking or incomplete cooking when element failure is the cause
• Works with the oven's convection fan and controls to maintain set temperatures

• 1 convection element

• Disconnect power to the appliance at the breaker before beginning any repair
• Handle the element carefully; avoid bending or damaging terminals and mounting tabs
• Verify fit and terminal connections match the original part before final installation

This broil element replaces the upper heating element in an electric oven to restore broiling performance and even top-down browning. It heats the top of the oven cavity so broil cycles and high-heat functions work correctly. What it does:

• Provides the high heat at the top of the oven for broiling and browning
• Replaces a burned-out or visibly damaged broil element
• Commonly used when the oven broil setting produces no heat or uneven browning
• Matches OEM form and terminal layout for direct replacement

• Disconnect power to the range at the breaker or unplug before starting
• Handle carefully to avoid bending the element or damaging terminals
• Remove oven racks and any necessary panels for access; support the element while disconnecting wires
• Tighten mounting screws and secure electrical connections before restoring power

The Bake Heating Element is an OEM Replacement Part for Whirlpool ovens, designed with push-on terminals. It measures 14-5/8" from the front to the mounting bracket, 19" in width, and 2-1/2" from the mounting bracket to the terminal end. The mounting holes on the bracket are spaced 1-7/8" apart, center to center. The terminals are designed as 1/4" male spades and the unit is rated for 2500 Watts at 240 Volts.

Causes of a bad bake element may include repeated heating and cooling cycles over time, electrical malfunctions, or physical damage from impact or exposure to spills.

Symptoms of a faulty bake element include:

• Oven not heating up properly or taking an excessive amount of time to preheat
• Hot or cold spots within the oven cavity, leading to uneven baking
• Visible damage or discoloration to the bake element itself
• Popping or sparking noises coming from the element area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.