Wall Oven Knob, Dial & Button

The Burner Control Knob is an OEM Replacement Part that provides you with precise control over the heat level of the surface burner on your LG range. This knob features a 'D' shaped shaft insert, designed for compatibility with a D-shaped shaft. In the OFF position, the flat side of the shaft insert is aligned for easy recognition. With dimensions of 2-3/8" in diameter and 1-7/8"W, the shaft extends approximately 1/4" past the back of the knob. 

Causes of a bad burner control knob can include frequent use leading to wear, accidental impact causing breakage, or exposure to high heat affecting its integrity. A compromised control knob can hinder your ability to control the burner effectively.

Symptoms of a bad burner control knob include:

• Difficulty turning the knob
• The knob not staying in the desired position
• Visible cracks or damage to the knob
• The knob becoming loose or falling off

This OEM LG part is also compatible with Sears/Kenmore models.

This control knob replaces a cracked or missing knob on your appliance's control panel. It restores positive engagement with the underlying control so you can select settings reliably and keep the front of the unit looking complete.

• Attaches to a keyed or D-flat shaft to operate the switch, valve, or timer underneath
• Allows you to choose cycles, temperatures, or burner levels as designed
• Common symptoms: knob cracked, stripped, loose/spins without engaging, falls off, or missing pointer
• Helps restore normal operation and a finished, uniform appearance

• Disconnect power; for gas appliances, also shut off the gas supply
• Pull the old knob straight off the shaft—do not pry against the bezel or panel
• Align the new knob's opening with the shaft and press firmly until fully seated
• Test the control to confirm proper engagement and function

The Range Knob is an OEM part for Whirlpool electric ranges and cooktops. Located on the range's control panel, this knob provides an interface for users to select cooking modes and easily adjust temperature settings on the oven and surface units. 

Causes of a faulty range knob include repeated exposure to heat and steam over time which causes plastic components to degrade and labels to fade. Mechanical wear from frequent use can also negatively impact knob operation.

Symptoms of a problematic range knob include: 

• Difficulty turning the knob to the desired setting  
• Knob continuously slipping out of selected position
• Illegible or missing graphics on the knob face

This genuine OEM Whirlpool replacement knob also fits select Maytag, KitchenAid, Jenn-Air, and Amana models.

This replacement control knob restores smooth, reliable control on your GE cooking appliance. It fits the control shaft so you can easily turn a burner or function on/off and select the desired setting when the original knob is damaged. What it does:

• Attaches to the control stem to adjust heat or function settings
• Replaces cracked, stripped, loose, or missing knobs
• Helps resolve issues like spinning freely, falling off, or difficulty turning
• Restores positive engagement for precise adjustments

• One control knob

• Ensure the appliance is off and cool before servicing
• Pull the old knob straight off the control shaft—do not pry against the panel
• Align the new knob with the stem's flat/splines and press on until fully seated
• Test for proper operation and alignment before use

Color: White

Color: White

The Infinite Knob is an OEM part for GE ranges. This knob is used to control the heat settings on the range’s burners, allowing for precise temperature adjustments during cooking.

Causes of a bad infinite knob can include wear and tear from regular use, accidental damage from impacts, or internal component failure that affects the knob’s ability to turn or properly control the burner.

Symptoms of a bad infinite knob include:

• Difficulty turning the knob
• Burners not responding to temperature adjustments
• Knob feeling loose or wobbly
• Cracks or visible damage on the knob

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Color: brushed chrome. It measures about 2 inches in diameter.

The Knob Bezel is an OEM part for Whirlpool ranges. As a decorative cosmetic component, the knob bezel surrounds the temperature and function knobs on the oven control panel. It helps protect the knobs while enhancing the aesthetic appeal of the appliance.

Causes of a bad knob bezel include wear and tears such as scratches, dings, or cracks over time from normal use. Exposure to heat and cooking residue can also cause discoloration or warping of the bezel material.

Symptoms of a bad knob bezel include:

• An outdated or worn out appearance on the oven control panel
• Exposure of the internal knobs without cosmetic protection
• Potential interference with knob functionality from tears or cracks

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: black. Measures about 2 inches in diameter.

Color: White

Replacement control knob for select ranges and cooktops. It mounts to the valve or switch stem so you can turn a burner or oven function on and choose a setting, restoring safe, reliable control. What it does:

• Attaches to the control shaft to operate a burner valve or control switch
• Provides on/off and level/temperature selection
• Common symptoms: cracked or broken knob, stripped insert/splines, loose or falling off, or inability to turn the control shaft
• Restores positive, accurate feel when selecting settings

• 1 control knob

• Disconnect power; ensure all burners are cool. For gas units, shut off the gas supply if needed.
• Pull the old knob straight off the stem; avoid prying against the bezel/control panel.
• Align the shaft flat/splines with the new knob and press straight on until fully seated.
• Test operation to confirm proper orientation and engagement.

The Range Knob is an OEM component specifically designed for Frigidaire ranges. It provides an intuitive interface for setting the desired temperature, function or timers. 

Causes of a bad knob can include stripped or worn-down lettering making the markings illegible over time. Repeated turning and adjustment of the knob can cause cracks or breaks in the plastic material. 

Symptoms of a bad knob include:

• Difficulty gripping or turning the knob to select settings  
• Knob spinning freely without engaging desired function
• Knob detaching completely from the electronic control board

This authentic OEM replacement knob is compatible also with Electrolux, Gibson, Kelvinator, and Kenmore ranges.

Replacement oven temperature control knob that mounts on the thermostat shaft. Restores smooth, accurate temperature selection when the original knob is cracked, stripped, loose, or missing, so you can reliably set your oven for baking or broiling.

• Attaches to the oven thermostat/control shaft to set cooking temperatures
• Replaces cracked, broken, missing, or loose knobs that spin without turning the control
• Restores proper pointer alignment with OFF and temperature markings
• Provides a secure, smooth-turning grip for everyday use

• Turn the appliance off and allow it to cool; disconnect power before servicing
• Pull the old knob straight off the shaft—do not pry against the control panel
• Align the flat/keyed side of the new knob with the shaft and press on firmly
• Test through temperature settings

This replacement thermostat knob mounts on the control shaft to set cooking temperature. It restores a secure grip and clear pointer so you can choose settings reliably when the original knob is cracked, stripped, or missing. What it does:

• Attaches to the thermostat/control shaft to adjust temperature settings
• Provides a clear pointer and tactile grip for accurate selection
• Can help resolve issues like slipping, not engaging the stem, or worn/illegible markings
• Helps restore consistent temperature adjustment when the original knob is damaged or missing

• One thermostat control knob

• Turn the appliance off and allow surfaces to cool before servicing
• Pull the old knob straight off the shaft—do not pry against the control panel
• Align the new knob with the shaft orientation/indicator and press on until fully seated
• Verify the pointer aligns with the Off/temperature marks and turns smoothly through the range

Color: black. It measures about 2 inches in diameter.