Whirlpool Hose Or Tube

Drains condensation from the evaporator to the drain pan. Replace if cracked, clogged, corroded, or leaking, causing water pooling in the fridge bottom.

The Water Line is an OEM part for Whirlpool refrigerators. As a component of the refrigerator's internal plumbing system, this water line connects the water filter housing to either the ice maker or water dispenser valve. 

Causes of a bad water line can include kinks, cracks or splits developing over time from normal use and vibration inside the refrigerator walls. Mineral deposits may also cause restrictive buildup within the line.  

Symptoms of water line issues include:

• Slow or interrupted water/ice production  
• Water leaks near the connections
• Mineral/foreign debris appearing in ice or dispensed water
• Water filter or valve malfunctions

This OEM replacement line is compatible with many Whirlpool, Kenmore, KitchenAid and other refrigerator brands.

The Drain Tube is an OEM part for Whirlpool-brand French door refrigerator water dispensers and ice makers. It channels excess water away during the icemaking process. 

Causes of a bad drain tube can include mineral buildup clogging the narrow opening over time or cracks developing from rigid ice contact every cycle.

Symptoms of a bad drain tube include:

• Water failing to properly drain away from the ice maker
• Puddles or leaks appearing near the freezer floor   
• Ice production deteriorating due to water backup
• Mineral scale deposits accumulating around connections

Replacing it with this OEM tube restores full water ejection to produce clean ice. Also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerators.

Water fill tube that connects from the back of the refrigerator cabinet into the ice maker fill cup. Replace if cracked, broken, or leaking water.

Replaces cracked or damaged water line tube in your refrigerator. Installs between water supply and dispenser/ice maker. Essential for leak repairs.

Drain hose for dishwashers that carries wastewater out during the wash cycle. Replace if cracked, clogged, or leaking to restore proper drainage.

Replacement drain hose for your dishwasher. Connects from the pump to the sink or garbage disposal. Order a new hose if yours is cracked or leaking.

Connects the vacuum break to the outer tub in your washer. Replace if cracked, split, or leaking to prevent water from bypassing the tub during fills.

Replacement water fill hoses for washing machines. Connect home water supply to washer. Replace when cracked, leaking, or showing rubber wear or corrosion.

Size: 8 foot long. This external washer drain hose is needed when there is more distance between the washer and the drain. Note: comes with 1.5" diameter clamp but hose is 1.25" in diameter; therefore you may need to order the 1.25" diameter clamp separately: WP356138

This manifold is the OEM gas valve assembly that routes propane or natural gas from the regulator to the oven and burner valves so the appliance can ignite and heat properly. Designed as a direct-replacement service part. What it does

• Channels gas from the regulator to individual burner/oven valves so each burner can ignite.
• Replaces a worn or damaged manifold that can cause weak or no ignition.
• Addresses symptoms such as burners that won't light, oven failing to heat, or inconsistent flame across burners.
• Works with the appliance's existing regulator and control valves when installed correctly.

• Turn off gas supply and electrical power before attempting removal or service.
• Inspect fittings and gaskets; replace any damaged seals to prevent leaks.
• After installation, perform a gas-leak test and verify proper ignition and flame patterns.

Flexible water hose that transports water between laundry center components. Replace when original hose is cracked, split, leaking, or worn out.

Replacement water inlet hose for washers. Connects to water supply and directs incoming water into the machine. Replace if cracked, leaking, or damaged.

Replacement water inlet hose for washers. Connects home water supply to the appliance inlet valve. Install when original hose is cracked, worn, or leaking.

This adjustable manifold is a direct-fit replacement that secures and positions the appliance's manifold assembly so related components line up and function correctly. It restores proper alignment and reliable operation when the original is bent or worn. What it does:

• Provides a mounting surface and adjustable position for the manifold assembly and attached components
• Helps maintain correct alignment so burners/valves operate smoothly
• Restores fit when the original manifold is damaged, bent, or loose
• Resolves symptoms such as uneven burner operation, ignition difficulty, or mechanical misalignment

• Turn off power and shut off gas supply before starting work
• Handle and align carefully to avoid bending; secure with the OEM fasteners
• Check seals and connections after installation; test operation per manufacturer instructions