Whirlpool Range / Cooktop / Oven Parts

My appliance is a Whirlpool Accubake Wall Oven, single door. After using the tech sheet and measuring the ohms of the two micro switches that sends signals when the door is shut and locked, determined the lock was faulty. Pretty simple to change, the most difficult part was taking the digital face off of the oven without damaging the control board. TIP: take a picture of the latch switches to ensure you put the correct wires on the correct switch. Read more

Need to open because no parts’ numbers can be identified through their website. But the rest “order and put in” are very easy steps. Will come back if I do need other parts Read more

Ordered factory Whirlpool knobs from Appliance Parts Pros. Parts arrived in 2 days. Read more

First check to see how many leads your switch has before ordering - I ordered before I took things apart, and got an incorrect 2 lead version when I needed a 3. On starting the repair, at first thought I might have to take apart console - but happily, no. After turning off power, just carefully pried the old switch out (putty knife to depress plastic clips above & below), pulled out gently (not much slack on wires) and removed the old wires by gently easing them off the broken switch with a... Read more

• Little to no heat when baking

Turned off 40 Amp breaker. Removed shelves from oven. Removed two screws in back panel holding element in place. Slowly pulled element free making sure wires stayed attached and not lost in oven insulation. Removed two wires from old element. Attached wires to new element. Pushed wires back into oven rear wall. Reinstalled the previously removed two screws. Turned on breaker. Total time less than 10 minutes. Read more

I replaced all 4 ignitors and new clips. Read more

After reaching out to AppliancePartsPros.com, I was assured that a new ECU was needed. In addition to locating the right part, APP professionals provided detailed instructions on installation. Read more

Ordered the parts which the sales rep was extremely helpful courteous and knowledgeable. The order arrived within 3 working days. Very easy remove and replace. Job done! Extremely satisfied customer and now our go to vendor! Read more

Replaced glass panel. 4 screws on plate face, 2 on bottom. Read more

I ordered the replacement kit from AppliancePartsPros.com. Exactly what I needed, better price than other sites, arrived smack on time. Couldn't ask for more. Site was easy to maneuver. Read more

Could not level stove. Front leveling legs had pieces broken out where leg contacted floor. Back leveling legs were worn and did not stay at corrected height when stove returned to full weight on floor. Replaced both front and back leveling legs, and stove was able to be leveled. Also bought Touchup Paint for numerous nicks and scratches - color matched perfectly. Read more

I replaced the thermostat and its control switch as it was not able to turn off. Read more

Placed burners on. Read more

Replaced the Spark Module and the Wire Harness. Works like new. Read more

I disassembled the top of the range and looked at the problem burner. It looked like there was a spark at all three other burners but not the problem burner. There was a visible spark at the connector between the wiring harness and the ceramic igniter but that spark wasn't making it up to the top of the igniter where it can light the burner. I ordered a new igniter for $19 and it was on my doorstep the next day. I replaced the part and now my wife thinks I am a genius. Don't tell her that... Read more