Amana Control Board

This mechanical timer governs the sequence and duration of each programmed cycle on 115V/60Hz machines, advancing steps automatically for consistent, reliable operation. It restores proper cycle timing when a worn timer sticks or fails to advance.

• Controls cycle timing via a motor-driven cam and internal contacts
• Advances the program and switches circuits at set intervals
• Symptoms of a failing timer include: cycle won't start or advance, stops mid-cycle, runs continuously, or ends prematurely
• Also causes erratic timing or skipped steps

• Disconnect power before servicing; work carefully around sharp cabinet edges
• Photograph or label wiring and transfer leads one at a time to the new timer
• Remove the control knob/escutcheon as needed, swap the timer, and align the shaft before tightening
• After installation, run a short test cycle to ensure proper advance and shutoff

This mechanical cycle timer controls the sequence and duration of washer operations. Replacing a failing timer restores proper advancement through fill, agitate, drain, and spin so cycles complete reliably with accurate timing. What it does:

• Advances the washer through each step by routing power to the water valves, motor, and drain pump at the correct times
• Sets the length of each stage for consistent operation
• Common failure signs: cycle won't advance or stops mid-cycle
• Timer knob doesn't move or must be jiggled to run
• Skips functions (no agitate, drain, or spin) while others still work

• 1 mechanical timer assembly

• Disconnect power before servicing; access the timer from the control console
• Take photos or label wires; transfer them to the new timer one at a time to maintain correct positions
• Reuse the existing knob and dial; align the timer shaft properly and secure the mounting screws
• After reassembly, run a short test cycle to ensure proper advancement

This is a frost kit for a bottom mount refrigerator. For a side by side refrigerator use part number 12002756.

The Cntrl-Elec is an OEM component specifically designed for Whirlpool refrigerators. This control electrical board is responsible for operating all critical refrigerator functions such as cooling, defrosting, temperature regulation, and controlling features like the ice maker. 

Causes of a bad control electrical board can include damage from power surges or outages, moisture intrusion that causes corrosion to circuitry over time, or failure of electronic components like sensors, relays, or microprocessors. 

Symptoms of a bad control electrical board include:

• Inoperative refrigerator functions like cooling or ice-making  
• Erratic temperatures or humidity inside refrigerator sections
• Fault codes or error messages appearing on control displays

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Electronic Control Board is an OEM part for Whirlpool refrigerators. It serves as the central hub for managing various functions and settings of the refrigerator, including temperature regulation, defrost cycles, and energy-efficient operations. This critical component ensures that all electronic and mechanical parts are synchronized for optimal performance.

Causes of a bad Electronic Control Board can include power surges, exposure to moisture, or general electronic failures. Such issues can impair the board's ability to send and receive signals correctly, affecting the refrigerator's functionality.

Symptoms of a failing Electronic Control Board include:

• The refrigerator not cooling properly
• Irregular or inconsistent temperatures
• The display panel malfunctioning or displaying incorrect information
• Unusual noises due to relays clicking on and off irregularly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The OEM Electronic Control Board is an OEM replacement part for Whirlpool dishwashers. It is a circuit board that controls all of the functions of the dishwasher, including the wash cycles, water temperature, and detergent dispensing.

Causes of failure involve damage from liquid intrusion shortening circuits or component deterioration over extended use reducing precision.

Symptoms include:

• Dishwasher fails to start selected cycle
• Lights, displays or programming malfunctions
• No response from control buttons
• Dishwasher appears dead or powerless

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The Control Board is an OEM part for Whirlpool refrigerators. This electronic component manages and regulates the various functions of the refrigerator, including temperature control, defrost cycles, and the operation of fans and compressors. It ensures the refrigerator maintains the optimal environment for preserving food.

Over time, the control board can fail due to electrical issues, power surges, or general wear and tear. A malfunctioning control board can disrupt the refrigerator's operations and affect its performance.

Symptoms of a bad fridge control board include:

• Inconsistent or incorrect temperatures
• The refrigerator not cooling properly
• Error codes displayed on the control panel
• Unresponsive or malfunctioning control settings

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Cntrl-Elec is an OEM part for Whirlpool dishwashers. As the control and electronic component, it governs all of the major functions and operations of the dishwasher. The control board contains integrated circuits, microprocessors, and electronic components that facilitate cycles, temperature regulation, safety features, and user input.

Over time, the electronic components inside the controller can degrade or become damaged. Environmental factors like surges, fluctuations in power, and other electrical issues may also potentially cause failure. 

Symptoms of a bad controller can include:

• Not operating or cycling at all
• Inability to start or stop cycles
• Fault codes displayed
• Issues with heating or drying
• Buttons or control panel not responding

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Control Board is an OEM part for Whirlpool dishwashers. It serves as the central control unit, regulating various functions such as cycle selection, water temperature, and drying operations through its electronic components.

Causes of a bad control board can include power surges, electrical shorts, water damage, or simply wear and tear over time.

Symptoms of a bad Control Board include:

• The dishwasher not starting or responding to inputs
• Error codes or indicator lights illuminating
• Cycles not running or completing properly 
• Issues with water intake, draining, or heating
• Strange noises or abnormal behavior during operation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This is a frost kit for a side by side refrigerator. For a bottom mount refrigerator use part number 12002754.