Amana Washer Parts

The Drain Hose is an OEM replacement part for Whirlpool washing machines. Located at the rear base of the unit, this flexible vinyl hose routes wash water out of the tub and to household drainage pipes.

Causes involve regular flexing weakening hose material integrity over many years. Mineral buildups may also restrict water flow within.

Symptoms of a problematic drain hose include:

• Puddles or residual water remaining after cycles
• Slow drainage of water not meeting cycle timers
• Hose material cracks or splits exposing reinforcement

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

This Washer Lid is an OEM replacement part for Speed Queen washers. It serves as the main cover and provides access to load and unload clothes during washing and rinsing cycles. The lid must be sealed tightly to minimize noise and ensure optimal energy efficiency.

Causes of a bad lid include long-term exposure to heat and moisture during use, impact or other physical damage.

Symptoms of a bad lid include:

• Excessive noise during spinning or agitation cycles
• Long wash times and higher energy bills due to leaks
• Difficulty opening or closing the lid securely
• Warping or bulging appearance

This OEM Speed Queen part is also compatible with American Dryer Corporation and Continental clothes washers.

The Door Handle is an OEM component for Whirlpool dryers. It provides convenient access to load and unload clothes through the dryer door opening. 

Causes of a bad door handle can include normal wear and tear over extended use. Repeated clutching and releasing of the handle leads to fatigue of rubberized grip areas and loosening of mechanical connections. Accidental falls or impacts when transporting dry loads of clothes could also damage the handle structure or mounting.

Symptoms of a bad dryer door handle include:

• Increased play, wobble, or looseness when grasped  
• Detachment or separation from the door assembly
• Cracks, splitting, or broken areas compromising the grip surface
• Inability to smoothly open or close the dryer door

Compatible models also include Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore dryers.

The Seal is an OEM part for Whirlpool washing machines. This part provides a tight seal around the washer shaft, preventing water from leaking out of the tub during the wash cycle.

Causes of a bad shaft seal can include wear and tear over time, exposure to harsh detergents or cleaning agents, or damage from foreign objects that may have gotten into the washer. 

Symptoms of a bad shaft seal include:

• Water leaking from the bottom of the washing machine
• Excessive noise during operation
• Visible damage or wear on the seal
• Wet spots or puddles under the washer

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Motor Spring is an OEM replacement part for Whirlpool top-loading washing machines. This spring applies proper tension to the agitator assembly during wash cycles.

Causes of a bad motor spring can include damage from unintended impacts or fatigue after extended use. Over time, constant movement may cause the spring to weaken.

Symptoms of a bad motor spring include:

• Inadequate cleaning as clothes don't tumble vigorously  
• Excessive noise or vibration from the off-balance agitator 
• Stalling or failure of the agitator to rotate fully

This OEM Whirlpool replacement is also compatible with some Kenmore, Admiral, Estate, and Roper top-load washer models as well. 

This pulley cover encloses the drive belt and motor pulley at the base of the appliance. It protects moving parts from debris and contact, helping reduce noise and wear when the original cover is cracked, warped, or missing.

• Covers the drive belt and motor pulley to keep out dust and debris
• Helps prevent foreign objects from contacting moving parts
• Restores proper clearance to reduce rubbing or scraping noises
• Common signs it's needed: cracked/missing cover, rattling from the base, visible rub marks on the cover or belt

• Disconnect power and, if applicable, shut off water supply before servicing
• Access the underside per your service manual; support the unit securely if tilting
• Reuse existing mounting screws; do not overtighten to avoid damaging the plastic
• Rotate the belt/pulley by hand after installation to confirm free movement and no contact

The Valve is an OEM replacement part for Whirlpool washing machines. This valve is responsible for controlling the flow of water into the washing machine during various cycles and operations.

Causes of a bad valve can include mineral or sediment buildup restricting water flow, worn seals or diaphragms allowing leaks, or mechanical failure of internal components.

Symptoms of a bad valve include:

• Inability to fill or drain the washing machine properly
• Excessive water usage or leaks
• Abnormal sounds during filling or draining cycles
• Incomplete or ineffective wash cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Baffle is an OEM part for Whirlpool washing machines. This part is located inside the washer drum and aids in lifting and moving clothes during the wash cycle, ensuring that water and detergent are distributed evenly for thorough cleaning.

Common causes of a bad baffle include wear and tear from frequent use, breakage due to heavy or unbalanced loads, or damage from foreign objects that may enter the washer drum.

Symptoms of a bad baffle include:

• Clothes not being cleaned evenly
• Unusual noises during the wash cycle
• Clothes getting tangled or damaged
• Visible cracks or breaks in the baffle

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Internal Drain Hose is an OEM part for Whirlpool washing machines. This part transports wastewater from the washer tub to the drain pump and out of the appliance, ensuring efficient removal of water during the drain cycle.

Causes of a bad internal drain hose can include wear and tear from regular use, blockages from debris or lint, or physical damage such as cracks, holes, or kinks from improper handling or installation.  

Symptoms of a bad internal drain hose include:

• Water not draining properly from the washer
• Leaks or water pooling around the base of the washing machine
• Error codes related to drainage issues
• Visible damage such as cracks, holes, or kinks in the hose

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Temperature Selector Switch is an OEM replacement part for Whirlpool dryers. This electro-mechanical switch allows consumers to choose between heat settings that adequately dry different fabric types.

Causes of a damaged selector switch can include regular wear from hundreds of cycles over the appliance's lifetime. Mineral deposits accumulating inside linkage mechanics may cause rotational movements to stiffen. The physical impacts of shifting internal contact positions could potentially lead to switching issues as well.

Symptoms of a faulty temperature selector involve:

• Inability to change heat level for desired drying performance  
• Temperature remaining stuck on highest or lowest settings
• Lint filter or duct cleaning lights failing to illuminate properly

This OEM replacement is compatible with some Kenmore and KitchenAid electric dryer models too.

The Water Pump is an OEM replacement part for Whirlpool washing machines. It plays a crucial role in circulating water throughout the wash cycles and draining the used water from the tub.

Symptoms of a bad water pump include:

• Washer not draining properly, leaving standing water in the tub
• Loud grinding or humming noises during the spin or drain cycles
• Leaks around the pump or connected drain hose
• Error codes or indicators related to drainage or pump issues

Causes of a bad water pump can include clogs or obstructions in the pump impeller, worn-out pump seals or bearings, or electrical malfunctions preventing the pump from operating correctly. Foreign objects or debris can also contribute to pump failure.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Drain Hose Assembly is an OEM part for Whirlpool washing machines. It is responsible for carrying wastewater from the washer to the household drain during the wash and spin cycles.  

Causes of a bad drain hose assembly can include blockages from debris, kinks or cracks in the hose, or general wear and tear from repeated use.  

Symptoms of a bad drain hose assembly include:

• Water not draining properly from the washer
• Leaks or puddles around the washer
• Visible cracks or damage to the hose
• Unpleasant odors due to standing water

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dishwasher Adapter is an OEM part for Whirlpool dishwashers. It serves as a connector, allowing various components of the dishwasher to interface correctly and ensuring proper water flow and pressure throughout the appliance.

Cracks, wear, or damage to the adapter can cause significant issues with the dishwasher's performance.

Symptoms of a bad Dishwasher Adapter include:

• Leaks under or around the dishwasher
• Poor water pressure during cycles
• The dishwasher failing to fill or drain correctly
• Visible cracks or damage to the adapter

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Gear Case Oil is an OEM part for Whirlpool washing machines. It lubricates the gears and components within the washing machine’s transmission, ensuring smooth and efficient operation during the wash and spin cycles.

Causes of bad gear case oil can include degradation over time, contamination from water or debris, and leaks due to worn seals or gaskets.

Symptoms of a bad gear case oil include:

• Loud or unusual noises during the wash or spin cycles
• The washing machine not agitating or spinning properly
• Oil leaks visible under the washing machine
• Increased friction or overheating of the transmission components

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Light Socket Kit is an OEM part for Whirlpool refrigerators. This kit includes the light socket and necessary components to ensure proper installation and functionality. It is designed to hold the refrigerator light bulb securely and provide reliable electrical connections to illuminate the interior of the refrigerator.

Common causes of failure include wear and tear, corrosion from moisture, or damage from handling or bulb replacement.

Symptoms of a bad Light Socket Kit include:

• Refrigerator light not turning on
• Flickering or intermittent lighting
• Visible damage or corrosion on the socket
• Burned or melted areas around the socket

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This washer suspension rod kit supports and steadies the tub so your machine can spin smoothly with less vibration and noise. Replacing worn suspension helps reduce banging, off-balance interruptions, and wet loads after spin. What it does:

• Supports and centers the wash tub within the cabinet
• Dampens movement to reduce shaking, thumping, and "walking"
• Helps the washer reach and maintain proper spin speed
• Resolve UL/unbalanced errors, excessive vibration, and a tub that sags or leans

• Four suspension rods with pre-attached springs

• Disconnect power and water; move the appliance to access service panels safely
• Lift the top/remove the cabinet; support the tub during service
• Replace rods one at a time to keep the tub supported; match any color-coded positions
• Level the washer after reassembly; perform calibration/diagnostics if the model requires it