Bosch Parts

This display module is the replacement control-panel display assembly that shows cycle status, settings and error codes so you can read and manage your appliance from the front. It restores clear visual feedback and control when the original display fails. What it does:

• Shows cycle progress, time remaining and selected settings on the appliance control panel
• Provides visual error codes and indicators to help diagnose issues
• Restores readable or responsive display when the original is cracked, blank, dim or unresponsive
• Works as the user-facing interface for selecting and confirming options

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Replace the control-panel/display by removing the console trim and any necessary fasteners; handle the module carefully to avoid damage.
• Protect against static discharge and avoid touching circuit contacts.

This genuine OEM replacement part is a pulley assembly for dryers. Sometimes called an idler arm, the pulley assembly keeps the dryer drive belt under tension as the belt wraps around the dryer drum. If the dryer is no longer spinning properly and is making a lot of noise, the pulley assembly may need to be replaced. Luckily this repair is a relatively simple process.To remove the old dryer pulley assembly, start by making sure the dryer is unplugged. Remove the lint screen from the top of the dryer. Remove the two Phillips screws by the lint screen opening. Depress the clips that hold the top cover down. Lift the top cover and keep it in an upright position. Disconnect the wire harness to the switch that separates the connector. Remove the screws on the front panel. Lift the panel forward and set it to the side. Next, lift the drum and locate the pulley assembly under the drum. Lift the belt off the motor pulley to remove the assembly. Set the new pulley assembly in the same position as the old one and make sure everything is aligned. Rotate the drum to make sure it rotates smoothly. reinstall the panels.This replacement part is sold individually and is compatible with Bosch, Gaggenau, and Thermador dryers.

This cotton insulation piece provides noise- and heat-damping for the appliance cabinet area, helping reduce operating sound and limiting heat transfer around the tub. Designed to replace worn or damaged insulation for a snug fit and quieter operation. What it does:

• Reduces operating noise by adding a sound-dampening layer around the tub area
• Helps limit heat transfer from the heater/tub to surrounding panels
• Provides a protective barrier to reduce vibration-related noise
• Restores the original insulation barrier when the old material is compressed or torn

• One cotton insulation panel, white, 46 dB variant

• Disconnect power and water supply before beginning any service
• Handle the insulation gently to avoid tearing; wear gloves and a dust mask if needed
• Remove access panels and old insulation, then position and secure the new piece in the same orientation
• Reinstall panels and restore power; test for proper operation and reduced noise

This dispenser door is the outer cover for the dishwasher detergent cup, providing a secure compartment for powder or tablet detergent until the wash cycle releases it. Restores proper detergent release and keeps the cup sealed during fill and wash. What it does:

• Covers and seals the detergent cup so detergent stays dry until the cycle releases it
• Pops open at the correct time so detergent dispenses into the wash
• Replaces cracked, warped, or otherwise damaged doors that won't latch or open
• Helps prevent detergent from dissolving prematurely or leaking into the tub

• Disconnect power and water to the appliance before servicing
• Remove the inner door panel or access the dispenser per the service manual to replace the door
• Handle plastic parts carefully to avoid damage; use proper hand and eye protection

This 1200W heater element warms dishwasher wash water to improve cleaning and drying performance. It replaces a worn or failed heating tube to restore normal wash temperatures and help reduce cycle time and spotting. What it does:

• Heats incoming water during wash cycles so detergents activate and soils break down
• Helps improve drying and reduces water spots by raising rinse temperature
• Commonly replaced when dishwasher runs but water stays cool or cleaning performance drops
• A fix for longer-than-normal cycles or error codes related to heating

• One 1200W heater element

• Disconnect power and water before beginning any repair
• Access requires partial disassembly of the dishwasher tub or base; follow OEM instructions
• Inspect wiring, connectors, and gaskets; replace damaged parts and tighten connections

A replacement fluff (lint) filter that captures lint and debris from dryer exhaust to help maintain airflow and reduce lint buildup. Fits the original filter slot and restores proper lint collection for safer, more efficient drying. What it does:

• Traps lint and fibers from clothes to prevent buildup in the dryer exhaust
• Helps maintain proper airflow for consistent drying performance
• Reduces the risk of blocked vents that can cause overheating or longer dry times
• Visible screen makes it easy to inspect and clean between loads

• Remove power to the appliance before accessing the filter area
• Slide the old filter out, clean the filter housing, then insert the new filter until it seats
• Regularly clean the filter after each load and inspect the housing for trapped lint

This outer door panel is the exterior panel that restores the appliance's front appearance and protects internal door components. Replacing a damaged or dented outer panel brings back a flush, sealed door and improves the unit's look. What it does

• Covers and protects inner door components from impact, moisture, and wear
• Restores proper door alignment and helps maintain the cabinet seal
• Improves cosmetic appearance when the original panel is dented, scratched, or corroded
• Helps prevent debris from entering the door cavity and affecting internal parts

• One outer door panel

• Designed for compatibility with specific OEM door assemblies; fit for your model before ordering
• Handle and trim may need transfer from the old panel; your model's parts diagram
• Use appropriate fasteners and avoid overtightening to prevent panel distortion
• Disconnect power and water (if applicable) and follow general safety precautions before servicing

Water filter removes contaminants and turbidity from the water supply to improve taste and quality. For optimal performance, filter should be replaced regularly. Quick, simple installation requires no special tools.