Parts for Whirlpool CEM2940TQ0: 01 - Bulkhead Parts

Distributes load under drum support fasteners to prevent hardware loosening. Replace if worn, cracked, or causing noise. Confirm fit with your model number.

Seals unused access holes in the dryer drum to prevent clothing snags. Replace if the original plug is missing, cracked, or has fallen out during use.

Foam seal prevents air leaks around the blower housing in your dryer. Replace if worn, compressed, or causing reduced airflow. Confirm fit by model.

Replacement mounting screw for securing components and housings in place. Order a new screw if yours is stripped, missing, or damaged during repairs.

Factory protective shield panel for dryer assembly. Guards internal components and directs heat or airflow. Replace if cracked, broken, or missing.

Dryer not heating or overheating clothes? A faulty cycling thermostat may be the cause. Regulates heat levels during the drying cycle. Easy DIY fix.

Fix screeching or clanking noises in your dryer. This push clip secures the drum support roller assembly. Moderate DIY repair, requires drum removal.

Dryer won't heat? This thermal cut-off kit prevents overheating and restores heat. Includes high limit thermostat and fuse. DIY repair in under an hour.

Dryer making loud noise or not heating properly? A damaged blower wheel disrupts airflow. Moderate DIY repair with video guide available.

Dryer not drying or taking too long? A cracked blower housing disrupts airflow. This assembly restores proper venting for efficient drying cycles.

Secures components in place to prevent movement and reduce vibration during operation. Replace if damaged or missing to restore proper alignment and performance.

Replacement screw for washers. Used to secure various components including handles, panels, and internal parts. Order if original is missing or stripped.

The heater box houses your dryer's heating element and screen. Replace this component when rusted, corroded, or the screen is damaged causing snags or stains.

Dryer not heating or overheating? A faulty hi-limit thermostat cuts power to prevent damage. Common fix when heat cycles on and off unexpectedly.

Lint trap won't slide in all the way or gets stuck? A damaged or obstructed lint chute assembly is usually the cause. Straightforward 30-minute repair.

Dryer not heating or taking too long to dry? This heating element generates heat to dry clothes. DIY repair typically takes 30-60 minutes with basic tools.

Connects power to your dryer's heating element. Replace this wire if it's frayed, burned, corroded, or broken to restore the electrical connection.

Secures the handle end cap to the center of your refrigerator door. Replace if missing, stripped, or lost during handle repairs. 8-18 x 1/2 inch size.

Fastener secures panels, brackets, and internal assemblies in washers, dryers, and refrigerators. Replace stripped, missing, or worn screws.

Secures drum support rollers to their shafts in your dryer. Replace if broken, missing, or damaged during roller maintenance to keep drum wheels stable.

Left-side shaft that supports the drum roller assembly in your dryer. Replace if worn, bent, or damaged to restore proper drum rotation and alignment.

Right-side shaft for dryer drum support roller. Replace if worn, bent, scored, or damaged to restore proper drum rotation. Installs on right side of cabinet.

Rear drum support roller kit for dryers. Mounts behind the drum to maintain alignment and smooth rotation. Replace when rollers are worn or damaged.

Flat spacer washer that maintains proper spacing between dryer drum components. Replace when worn to reduce friction and prevent metal grinding noises.

Fix washer shaking and excessive vibration during spin cycles. This leveling leg locking nut secures adjustable legs to stabilize your machine.

Structural front bulkhead panel for dryer drums. Secures the rear of your appliance and enables proper airflow. Replace if cracked, broken, or missing.

Supports the front drum and reduces friction for smooth rotation. Replace if your dryer is noisy, clicking, or leaving marks on clothes. Confirm fit.

Mounting screw that secures the rear panel to the washer cabinet frame. Replace if screw is missing, stripped, or damaged to maintain proper panel fit.

Seals the rear drum edge to contain hot air and improve drying efficiency. Replace if worn, torn, or causing noise. Confirm fit with your model number.

Replaces a cracked, dented, or damaged dryer drum bulkhead. This front drum component restores smooth tumbling action when the original is worn or broken.

Plastic drum baffle that lifts and tumbles clothes during drying. Replace if cracked, broken, detached, or missing from inside your dryer drum.

Short baffle that mounts inside the dryer drum to lift clothes as the drum rotates. Replace if cracked, broken, or missing for proper tumbling action.

Seals the lint screen housing to prevent air leaks and maintain proper airflow. Replace if damaged, missing, or causing lint buildup. Verify fit.

Replace a cracked or missing dryer mounting bracket to keep components securely aligned. Restores support to prevent movement and premature wear.