We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Show parts
Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.
Most orders arrive by Tuesday, November 24
Usually ships within 4 - 14 days
Washer won't spin or clothes stay soaking wet? This inner drum tub assembly replaces the rotating basket that holds and tumbles laundry during wash cycles.
Drum bearing bushing for washers. Installs between drum and bearing assembly. Replace if cracked, worn, or missing to restore proper drum support.
The washer Hose Retainer Holder Clip is an OEM part that mounts behind the control panel on LG front-loading washers. It positions water supply hoses to prevent kinks or stress that leads to leaks over time.
Causes of a failed clip include fatigue from years of front-load vibration and damage from any installation or repair work behind the control panel.
Symptoms of an insufficient hose retainer clip include:
This OEM replacement clip is compatible with select Kenmore front-loaders.
Fastens key washer components to maintain alignment during operation. Replace if stripped, rusted, or missing to restore stability and reduce vibration.
Secures washer drum during moving or transport. Immobilizes internal components to prevent damage. Replace if missing, lost, or needed for relocation.
This factory bolt assembly is a hardware fastener used to secure designated components within the appliance. Replacing a worn or missing bolt restores a tight, stable connection to help reduce vibration and noise while keeping parts properly aligned. What it does:
This part is discontinued by the manufacturer and is no longer available for purchase.
Washer won't spin or makes grinding noises? The motor rotor bolt secures the rotor to the motor shaft. Requires a 17mm socket for installation.
Secures washer tub during transport to protect suspension and internal components. Essential for moving your washer safely without damage to the drum system.
Secures the outer door boot seal to prevent water leaks. Replace if damaged, rusted, or losing tension. Includes tensioning spring. Verify fit.
Secures the washer door to the cabinet frame for smooth opening and closing. Replace if your bracket is cracked, bent, or broken to restore proper alignment.
Fix washer control issues with this multi-connector wire harness. Restores electrical connections between control board and components. Direct fit.
Secures the stator to the motor assembly in your washer. Replace if bolt is stripped, spinning freely, or missing to restore proper motor stability.
Fix washer electrical failures with this wire harness. Restores power and signal routing between control boards and components. Direct fit replacement.
Complete outer door assembly for washers. Restores proper sealing and appearance. Replace if door is cracked, damaged, or won't close securely. Confirm fit with your model number before ordering.
Replacement door handle for washer. Restores secure grip and factory appearance. Replaces cracked, loose, worn, or broken handles for smooth opening.
Connector nozzle creates a secure seal between hoses or tubing in your washer. Replace when you notice leaks or loose connections. Confirm fit with your model.
This internal inlet hose directs incoming water into the appliance's fill system. Replacing a cracked or leaking hose restores proper water flow during cycles and helps prevent water damage around the unit. What it does:
Fix no hot water, slow filling, or screaming noise during fill. This washer water inlet valve controls water flow into the tub. Moderate DIY repair.
Fix a washer that won't fill, fills slowly, or leaks at the water connection. This inlet valve controls water flow into the tub. Easy DIY repair.
The Float Assembly is an OEM part for LG washing machines. This part monitors and controls the water level within the appliance. It's a safety feature that prevents water overflow and potential flooding, contributing to the efficient operation of the washing machine by maintaining the correct water level for each cycle.
Causes of a bad Float Assembly can vary from simple blockages that prevent the float from moving freely to electrical faults within the switch mechanism.
Symptoms of a bad Float Assembly include:
This OEM LG part is also compatible with some Kenmore models.
Washer won't spin or agitate? The stator assembly generates the electromagnetic field that powers drum rotation. Moderately difficult repair.
Mounts to the washer's lower frame to secure components and maintain alignment. Replace if bracket is cracked, broken, rusted, or missing hardware.
A replacement control knob assembly that restores reliable control and user interface for compatible appliances. Designed to give a secure fit and clear detents for accurate temperature or function selection. What it does:
Leveling leg assembly for washers and laundry centers. Installs at the base to support and level the unit. Replace if cracked, broken, or missing.
Fix fabric softener leaking or not dispensing properly with this washer dispenser cap. Seals the softener compartment to prevent drips and residue.
Seals siphon/drain connection to prevent leaks and odors. Replace if worn, cracked, or leaking. Confirm fit with your washer model number.
Fix leaking from under the detergent dispenser with this washer dispenser box. Solves cracks or breaks that compromise the dispenser structure.
This is a plastic cover or case that fits over the drain pump filter area on a front-load washing machine. It provides access to the drain pump filter for cleaning while keeping the filter securely enclosed during operation. Replace this cover if it is cracked, broken, or no longer snaps into place properly, which can cause water leaks near the bottom front of the washer.
Fix detergent not dispensing or leaking during wash cycles. This washer dispenser assembly houses detergent and fabric softener compartments.
Connects detergent dispenser to washer tub. Replace if cracked, leaking, or clogged with detergent buildup. Verify fit with your model number.
The Vent Hose is an OEM part for LG washing machines. This hose is essential for ensuring proper ventilation within the washer, allowing air to circulate and preventing the buildup of moisture and mildew. It helps maintain the efficiency of the washing machine by facilitating the expulsion of air and excess water vapor during operation.
Causes of a bad washer vent hose can include wear and tear over time, blockages from lint or debris, or damage due to bending or pinching.
Symptoms of a bad vent hose include:
This OEM LG part is also compatible with Sears/Kenmore.
Replacement heater assembly for washers. Installs in the wash tub housing. Replace if cracked, leaking, or damaged. Includes integrated thermistor sensor.
Connects household water supply to your washer inlet valve. Replace this hose if it's cracked, leaking, or worn to restore safe water flow during cycles.
Directs water from inlet valve to detergent dispenser in LG washers. Replace if hose is cracked, leaking, won't stay attached, or damaged from wear.
Fix a washer that won't drain or leaves standing water with a new drain pump assembly. Moderately challenging repair that solves drainage issues.
Fix LE error codes or grinding noises during spin with this washer rotor assembly. Pairs with stator to drive drum rotation. DIY repair in 30 minutes.
Washer won't fill properly or overfills? The pressure switch monitors water levels and signals when to stop filling. Moderately easy DIY repair.
Suspension spring supports and stabilizes the washer tub during wash and spin cycles. Replace if broken, snapped, or stretched to restore proper operation.
The Holder is an OEM part for LG front-loading washing machines. It is a plastic mounting bracket or suspension system that attaches to the rear of the washer tub and helps secure internal components like hoses, pulleys, and the rear bearing in place during spin cycles. Subject to force and vibration, the holder must withstand years of washing use.
Symptoms of a bad holder include:
Causes can be fatigue from repeated wash cycles, stress cracks from heavy loads, or material deterioration over time. Replace with this OEM LG holder to maintain drum balance and suspend components securely. It is also compatible with Sears/Kenmore front-load washers.
Replaces a damaged, melted, or scorched power cord assembly on your washer. Restores safe electrical connection when the original cord is burned or worn.
Directs wastewater from your washer to the drain. Replace if cracked, split, clogged, or leaking. Includes hose clamp. Confirm fit with your model.
Replace a worn washer door hanger assembly pivot to restore proper door alignment and smooth operation. Ensures the seal closes correctly. Verify fit.
This sensor assembly detects vibration and out-of-balance conditions during the washer's spin cycle. It mounts to the washer's tub or frame and sends signals to the control board to adjust spin speed or pause the cycle when excessive vibration is detected. Replace this sensor if the washer frequently stops mid-spin, displays an out-of-balance error code, or fails to reach full spin speed even with a properly balanced load.
Fix a washer that won't start, stops mid-cycle, or shows error codes with a new main control board. This board manages all washing functions and cycles.
The Clamp is an OEM part for LG washing machines. It is used to secure the hose connections within the washer, ensuring that water flows correctly without leaks.
Over time, the clamp can become worn or damaged due to repeated exposure to water, vibration, or general wear and tear. If the clamp fails, it can lead to water leaks or hoses becoming detached.
Symptoms of a bad clamp include:
This OEM LG part is also compatible with Sears/Kenmore models.
Secures hose connections to prevent leaks in your washer. Replace if corroded, rusted, or leaking around hose fittings. Confirm fit by model number.
Secures washer hoses to pumps, tubs, and drain fittings to prevent leaks. Replace when weakened, rusty, or damaged to maintain tight connections.
Fix washer leaks with this hose clamp. Secures hoses to pumps and valves, preventing water leaks and disconnections during wash cycles. Simple repair.
The NOISE FILTER ASSEMBLY is an OEM part for LG washing machines. It is a component designed to minimize vibrations and reduce noise emanating from the washer during operation. Proper noise damping is important for smooth functionality without disturbance.
Causes of a bad noise filter assembly can include cracks or tears developing over extended use. Physical damage from impact could also compromise its noise-blocking abilities.
Symptoms of a bad noise filter assembly include:
Replace yours today with this genuine OEM LG part to restore a quiet wash experience. This replacement assembly ensures optimum vibration control. It is also compatible with Sears/Kenmore models.
Front-load washer door boot seal prevents leaks between drum and cabinet. Replace if torn, cracked, or moldy to stop water damage. Confirm fit with model.
Fix water leaking from your washer dispenser or misdirected flow with this dispenser water guide channel. Routes water properly to prevent splashing.
Secures the door boot seal to prevent leaks during wash cycles. Replace if corroded, loose, or if water leaks from the door area. Confirm fit with model.
Forms a flexible seal between tub and door on front-load washers to contain water. Replace if torn, moldy, or leaking to restore seal and eliminate odors.
Secures rubber hoses to fittings with constant spring tension to prevent leaks. Replace when rusted or weakened to maintain a tight seal. Confirm fit.
Fix excessive vibration, banging during spin, or washer walking across floor. This damper assembly controls drum movement. Moderate DIY repair.
The Hinge Pin is an OEM part for LG washing machines. It serves as a pivot point for the washer door, allowing it to open and close smoothly. This component is crucial for maintaining the proper alignment and function of the washer door, ensuring a secure and reliable seal during operation.
Common causes of a bad hinge pin include frequent use leading to wear and tear, physical damage from accidental impacts, or rust and corrosion over time. A compromised hinge pin can result in misalignment of the door, affecting the washing machine's ability to close properly and maintain an effective seal.
Symptoms of a bad hinge pin include: