Chainsaw Filter

This air filter is a part of the air cleaning system on select lawn and garden engines. Combustion engines take in air and that is mixed with the fuel in the carburetor and then sent to the engine. The air filter is designed to catch particles and debris that come into the engine so that the air getting through is clean and pure. The filters naturally become clogged with regular use so replacing them is a part of routine maintenance that should be done every six to 12 months, depending on frequency of use. In some cases, the filter may become clogged in between maintenance, which would require an additional replacement. It may be helpful to keep an extra filter on hand. This OEM air filter is manufactured by Poulan to exact standards. It fits a variety of Poulan machines, as well as those from Weed Eater, AYP, and Husqvarna. It is used in various models of pruners and trimmers and does not require any tools for replacement. The air filter is made of durable foam material and designed to catch fine particles to ensure the cleanest air enters the engine. It is sold individually.

The air filter works to prevent contaminants from entering the chainsaw’s carburetor. When the air filter becomes clogged with things like dust, yard clippings, pollen, and other materials, it cannot supply fresh air to the carburetor. If the carburetor does not have enough air to mix with the gasoline, it cannot create a fuel mixture for the engine. If you see signs that the engine is not running correctly, runs roughly, or does not start at all, check the air filter and replace if needed. It is important to check the air filter frequently to prevent damage or engine inefficiency. Keep several air filters on hand to make swapping them out convenient. A good rule of thumb is to replace air filters annually. This air filter is compatible with chainsaws made by Craftsman, McCulloch, and Poulan. This air filter is a genuine OEM part.

This is a genuine OEM replacement fuel filter for a Craftsman chainsaw. Before fuel passes into the combustion chamber, it first has to be oxygenated in the carburetor. This makes a perfectly balanced fuel that's ready for ignition. However, if dirt, dust, or other particulates were to get into the carburetor, they would clog it up and cause more widespread engine troubles. To prevent this, manufacturers install a fuel filter in the fuel tank to catch any debris. Although dirt in a fuel tank isn't a common problem, after repeated top ups, enough debris can fall into the tank to clog up the fuel filter. When this happens, fuel will not be able to pass into the carburetor and the engine will perform as if it isn't getting any fuel. After draining the fuel tank, use a pair of needle-nosed pliers to remove the fuel line and change out the fuel filter. This replacement filter is a high-quality replacement part, and as such, it comes sourced directly from its original manufacturer. This part does not ship with any additional hardware.

The air filter in a chainsaw is located right between the intake and the carburetor and is responsible for cleaning the air as it enters the carburetor. Over time and with regular use, the air filter may be clogged with debris and buildup. Therefore, they should be replaced regularly as a part of routine maintenance, or whenever equipment isn’t running as it should. It’s also a good idea to have an extra filter on hand. Let the engine cool completely before replacing the air filter to reduce the risk of burns. Ensure that the saw is off and not at risk of engaging, and use gloves to perform the replacement. This air filter is made by Husqvarna and is designed to work with select Craftsman, Poulan, and Poulan Pro chainsaw models. It is a genuine OEM part and is sold as a single filter. Check the manual for compatibility and part numbers to ensure an exact fit.

This pleated filter or filter pleat is an OEM replacement part designed specifically for use in chain saws and gas chain saws made by Craftsman, Husqvarna, and Poulan, among others. The filter is designed to capture any debris or dirt from the air before it makes its way into the carburetor and engine. Any debris can cause the engine to malfunction or idle unevenly. This can also prevent proper cooling and allow engine overheating or damage. Replacing the filter is easy and requires a screwdriver and socket set. After the machine cools completely, remove the cover. Next the filter pleat is removed and replaced with this replacement part. Then, replace the cover. This part ships individually without any hardware or other components and is made of long-lasting, effective materials.

The genuine replacement air filter is made of foam and catches dust and debris from the air as it enters the engine on select lawn and garden equipment. Over time, filters will become clogged with regular use, which makes replacing them a part of routine maintenance on most engines. The air filter may also become clogged intermittently or due to excessive dust buildup between maintenance schedules, so it may be helpful to keep an extra filter on hand for emergency replacements. These filters cannot be cleaned and must be replaced when they become clogged. This genuine OEM filter is manufactured to exact standards by Husqvarna and is designed for use with hundreds of machines from Jonsered and Husqvarna, including blowers, trimmers, edgers, hedge trimmers, and saws. Replacing the air filter does not require any tools. Allow the engine to cool and simply remove the filter cover, take out the old filter, and replace the new filter. Then replace the cover. Always wear gloves when performing engine work. This filter is sold as a single unit and does not include the air filter cover or base assembly.

This is a quality air filter used with many types of gas powered string trimmers. The air filter plays an important part in the engine since it ensures the motor only has clean air available. The air filter is responsible for catching dirt, dust, and other debris and collecting it in one place before it can move into other components of the trimmer. The air filter needs to be inspected on a regular basis for damage or clogging. If either of these things occurs, the air filter needs to be replaced to ensure the engine gets clean air.No tools are needed to replace this string trimmer air filter. The bolt knob that secures the air filter cover will need to be removed first. Remove the original air filter and place the new one in the same location. Reassemble the parts and make sure to test the string trimmer before use.This air filter is compatible with various string trimmers manufactured by Poulan, Poulan Pro, and Craftsman. It is sold as an individual component. It is an authentic OEM replacement part that is sourced directly from the manufacturer.

This is a fuel filter and hose that fits several different models of chainsaw. It's located near the fuel tank and works to prevent dirt, debris, and water from entering the combustion chamber of the chainsaw. It removes the impurities that are in the fuel before any of them can reach the carburetor. If the filter is clogged, the hose is kinked, or either of the components is otherwise damaged, it will need to be replaced.A sputtering noise when starting the chainsaw could indicate that the fuel filter and hose are damaged. It can also cause difficulty starting, or uneven idling. If the problem is severe, the chainsaw may have little power while it is being used or might not turn on at all. When replacing this part, make sure the chainsaw is powered off and the spark plug has been removed. The fuel filter and hose can be removed from the fuel tank and replaced to get the chainsaw to run again.This fuel filter and hose is a genuine OEM replacement part directly sourced from the manufacturer. It comes as an individual part. It is designed to be used with compatible Craftsman and Poulan chainsaws.

This is a genuine fuel pickup assembly that is an integral part of many models of chainsaws from major manufacturers. This component is part of the fuel system and ensures the gasoline makes it from the fuel tank to the chainsaw's carburetor. When the primer bulb is pressed, it causes air to leave the carburetor so it can be filled with fuel. The extra fuel moves back into the tank using a return line. This part is made from quality materials but can wear out or become damaged, which will require it to be replaced.Basic tools like an Allen wrench and a screwdriver may be needed to replace the broken or damaged fuel pickup assembly. A pair of work gloves is also useful for the process. Make sure the chainsaw is powered off and placed on a level surface. Disconnect the spark plug wire to prevent the engine from powering on. Disassemble the tool to gain access to the fuel pickup assembly so it can be replaced with a new component.This is an authentic OEM replacement part that is sourced directly from the manufacturer. This fuel pickup assembly is sold individually. The part is designed to be compatible with chainsaws manufactured by Craftsman, Husqvarna, and Poulan.