Craftsman Handle

This replacement part is a throttle kit. It is a genuine replacement part made by Husqvarna. It is important that this part is able to be used properly so that the user is able to operate the machine effectively and efficiently. A new throttle kit might be needed if the current machine is having trouble starting up or is starting slow. This can be due to the throttle not being connected properly. It is true that the throttle can become worn down over time and it is recommended that it be replaced if this is the case. Be sure to reference the specific owner's manual for more details on how to install this part on the device. This part is a genuine OEM replacement part and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

This replacement part is a starter handle and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This starter handle aids the user in starting and shutting down the lawn mower safely. A new starter handle might be needed if the current one is damaged or broken in anyway. It is easy to replace this part. If the user is unable to start or shut down the appliance it might be faulty. Be sure to reference the owner's manual for detailed instructions on this replacement. Always be sure the engine is powered down before attempting to replace this part. This part is sold individually. It is also sourced directly from the manufacturer and is intended for different types of lawn mowers. This is also a genuine OEM replacement part.

This handle grip is a genuine MTD part, sold individually. This handle grip can be used as a replacement part in a variety of small engine outdoor appliances including lawn mowers, log splitters, and wood chippers. The purpose of the handle grip for one of these appliances is to cover the surface area of the handle so that it can be more easily and more comfortably grasped by the operator of the appliance while in use.The handle grip in a lawn mower, log splitter, wood chipper, or other type of outdoor appliance could suffer damage within the general lifespan of the appliance. If the handle grip is sufficiently punctured, eroded, warped, torn, or otherwise damaged in a manner that precludes it from providing comfort and ease to the operator, the handle grip should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This handle grip is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Yard Machines, Troy-Bilt, Bolens, MasterCut, and Yard Man.

This replacement part is a chute strap. It is a genuine replacement part made by MTD. This strap is able to connect to the chute so that the user can carry the bags of debris more easily. This allows for a safe and easy disposal of the grass clippings and mulch after work is complete.A new strap chute might be needed if the current one is damaged or missing. If the strap is unable to stay attached to the chute it is recommended that it be replaced. After years of normal use it is possible that the strap can become damaged or worn down over time and in this case, should be replaced before continuing use. This part is sold individually and is sourced directly from the manufacturer to ensure long-lasting use. This is also a genuine OEM replacement part.

This trigger is a genuine MTD part that can be used as a replacement part for a snowblower operated by power steering. The trigger is located under the handlebars of a snowblower and functions as a crucial feature of the appliance's power steering capabilities. The trigger is connected to the tires through a network of cables through the engine, allowing effortless turning capabilities, even on tough, sharp turns. A trigger might have to be replaced if its material shows signs of deterioration, including bending, cracking, tearing, or melting. This deterioration can be attributed to general overuse or long-term exposure. If a trigger is subject to any of this kind of damage, it is best to replace it before using the snowblower, as the malfunctioning trigger might affect the power steering capabilities of the snowblower, creating an unsafe work environment and the possibility of permanent or unnecessarily extensive damage. Always wear gloves when handling, repairing, and operating outdoor equipment. This trigger is compatible with the brands MTD, Troy-Bilt, Yard Machines, and Cub Cadet.

This replacement part is a control handle, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This control handle is typically found in lawn mowers. A control handle is one of the most important parts of a riding lawn mower as it is used to shift gears and control the speed of the machine. A new control handle might be needed if the current one is unable to operate under normal conditions. Because this part is very heavily used it is common for it to be worn down due to normal wear and tear. This replacement should be fairly simple and only require common household tools. See the specific owner's manual for directions on how to replace this part. This part is sourced directly from the manufacturer and is a genuine OEM part. This control handle is sold individually.

This replacement part is an upper handle intended for use in lawn mowers. This is a genuine replacement part made by MTD. Handles are a very important part to walk behind lawn mowers and are essential in helping the user guide the machine in the correct direction. A new upper handle might be needed if the current one is broken or damaged in any way, including being dented, bent, or cracked. It is common that this part will need to be replaced after years of normal wear and tear. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. It is recommended that the user refer to the appliance manual for more detailed instructions on how to install this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

This upper handle can be used as a replacement part for a lawnmower or snowblower. The upper handle allows the user to control the movement of the equipment while it is in operation.If the part suffers damage from direct impact or wears down from use over time, it may need to be replaced. An upper handle can suffer damage in the form of piercing, cracks, scrapes, punctures, and corrosion of the metal material. If this damage makes steering the lawnmower or snowblower difficult, the handle should be removed and replaced with this genuine OEM replacement part before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This upper handle is a genuine MTD part, sold individually. It is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Yard Machines, Huskee, Craftsman, Yard-Man, and Bolens.

This throttle housing & trigger assembly is a genuine MTD replacement part for a handheld gas lawn trimmer. A lawn trimmer is designed to cut grass, shrubs, bushes, and weeds. The throttle housing & trigger assembly is a kit containing a black plastic throttle housing, a trigger, a spring, and the screws to bind the pieces together. The function of a throttle housing is to house the throttle for the lawn trimmer, which spins the blades at specific velocities, with a full throttle corresponding to full blade velocity. The trigger assembly consists of the trigger itself, the hammer, the disconnector, and the springs, and the function of the trigger is to activate the engine, thereby engaging the throttle.In order to replace the throttle housing, the engine must not be running and the oil should be emptied from the tank. If the throttle housing & trigger assembly is damaged to the point that the lawn trimmer is unusable, the throttle housing & trigger assembly should be removed and replaced immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This throttle housing & trigger assembly is compatible with the following brands: MTD, Troy-Bilt, Yard Man, and Bolens. This part sold individually.

This replacement part is a trigger and lockout kit intended for use in chainsaws. This is a genuine replacement part made by Husqvarna. Trigger and lockout kids are situated next to the handle at the top of the appliance. This part is one method of protecting the user from anything that can be harmful when using a chainsaw. It is made of durable plastic and metal. A new trigger and lockout kit might be needed if the current one is damaged or broken in any way. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with chainsaws made by Husqvarna.