Craftsman Tank & Container

This fuel tank is a genuine OEM part sourced from the manufacturer. It is commonly used on chippers, lawnmowers, lawn tractors, and other lawn and garden equipment that is powered by gasoline. The fuel tank is attached to the carburetor with a hose and clamp. The fuel tank has a vented fuel cap to help keep a vacuum from developing in the fuel line. If a vacuum develops, the fuel will not flow from the fuel tank to the carburetor. The fuel tank is made of non-corrosive plastic to prevent deterioration from the fuel.Inspect the fuel tank periodically for signs of deterioration. If there are any cracks or flaws that could become cracks, replace the fuel tank. Leaking fuel not only reduces the performance of the engine but can also be a safety hazard. Before replacing the tank, the fuel should be run dry or pumped out. Remove the spark plug to prevent accidental engine ignition while the fuel tank is replaced. This fuel tank is sold as an individual unit. It is designed for use with lawnmowers, lawn tractors, and many other small engines that are powered by fuel. This fuel tank is compatible with equipment made by MTD, Yard Machines, Yard-Man, Cub Cadet, Troy-Bilt, and Husky.

This genuine replacement part is a fuel tank, also known as a fuel tank assembly. This part is the gas tank for a snow blower. This fuel tank holds gas, and is required for proper operation of a snow blower. A faulty or damaged fuel tank can leak gas, leading to improper or dangerous operation of the product. Shut off the snowblower, allow the engine to cool, and ensure the tank is empty before installation. Wear work gloves to protect the hands and work in a well-ventilated area during installation.This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. This part is compatible with a variety of MTD, Yard Machines, Troy-Bilt, Yard Man, Cub Cadet, Husky snow blowers. Please note: original part number 751-11201 is now obsolete, and manufacturer has replaced the original part number with this part.

This fuel tank assembly can be used as a replacement part for the small engine of a snowblower or a tiller. The fuel tank assembly contains the fuel tank as well as the parts required to install the part. The purpose of the fuel tank is to store fuel for the engine and dispense the fuel in order to power the engine.A fuel tank assembly might be ordered as a complete replacement part if the fuel tank and its components suffer damage. This damage might manifest in the form of fuel leakages from punctures, holes, or corrosion to the material. If this damage affects the fuel tank and its components, it should be removed and replaced before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, MTD. It is sold individually. This fuel tank assembly is compatible with the following brands: MTD, Troy-Bilt, Yard Man, and Cub Cadet.

This is a fuel tank for MTD string trimmers. It’s constructed from white resin, which combines the tank and mounting flanges in a one-piece, molded design. The gas cap is glossy black plastic, and the tank and primer leads are both already installed. There are two mounting screws included in the kit, making installation more convenient. This is a 2-cycle fuel tank designed for engines that run on a mixture of oil and gas. Ordinary gasoline can cause damage to the fuel lines. Tanks should ideally last for several years but can get damaged, causing a leak. Gas tank leakage is a significant safety issue and must be fixed immediately. Tanks may also need to be replaced if they become extremely soiled. To replace the tank, you will simply need to disconnect the old tank’s fuel lines and remove the two mounting screws. In addition to MTD trimmers, this tank is also used on some Troy-Bilt and Cub Cadet models. This is an OEM part sourced directly from the manufacturer, and it is sold individually.

This fuel tank assembly stores fuel. It is made from a thick plastic material. The assembly includes the fuel tank, fuel cap, and fuel lines. Although it is generally durable, exposure to fuel chemicals and the environment can eventually cause fuel tank leaks. When this happens, the fuel leak may damage other components. To install a new tank assembly, make sure to drain the old tank first. Detach the fuel lines and then use a screwdriver to remove its mounting screws. This replacement will take less than 10 minutes to complete. MTD makes this brand-new fuel tank assembly. This replacement includes the tank itself, the fuel lines, fuel cap, and mounting screws. All of which are sourced directly from MTD. It is compatible with string trimmer models from Bolens, Yard-Man, Murray, Craftsman, Yard Machines, MTD, Cub Cadet, and Troy-Bilt. This fuel tank assembly doesn't include the original MTD air filter.

This fuel tank assembly from MTD is a genuine replacement part. It is a fuel reservoir made from a thick and durable plastic material. It is designed to fit and work with tillers, edgers, and string trimmers from MTD, Craftsman, Cub Cadet, and Yard Machines. When this fuel tank wears out, liquid may seep out and waste gas. A fuel tank assembly replacement is easy. The process will take approximately 30 minutes or less. First, make sure that the machine has cooled down and there is little fuel left in the tank. Make sure to wear gloves since fuel spills can occur, especially when removing the fuel lines. Then, remove the spark plug connector to prevent the engine from starting. Disconnect the fuel line and unfasten the mounting screws of the fuel tank. Install the fuel tank and attach the fuel line. This replacement fuel tank assembly is sold individually. The assembly includes the tank, fuel cap, and one fuel line. It is an original replacement made directly by MTD.

This fuel tank is a genuine Husqvarna part, sold individually. This fuel tank can be used as a replacement part for lawnmowers and lawn tractors.The fuel tank might have to be replaced if it suffers damage that prevents it from being able to store fuel. This could occur as the result of damage in the form of puncturing, tearing, ripping, or eroding to the material of the fuel tank so that fuel leaks out of the tank and into the appliance. If this occurs, the fuel tank should be immediately removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel tank is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This is a fuel tank assembly for use with gas trimmers. The fuel tank is what houses the fuel the trimmer requires for power. If there is a leak or another issue with the tank, replace it. Leaks could be dangerous, and they will reduce the efficiency of the machine.The fuel tank is made from high-quality hard plastic. It is durable, but it could still be damaged. It could start to leak. The tubes could be damaged and cut, or the cap could be damaged or lost. To make the replacement, the owner will need to have a screwdriver to remove shrouds and covers.The fuel tank assembly is made to be compatible with certain models of trimmer from Craftsman and MTD. The assembly includes the tank, as well as the fuel lines and fuel cap. This is a genuine OEM replacement part sourced from the manufacturer.

This part is a fuel tank assembly that is used on leaf blowers. This assembly includes the fuel tank, fuel lines, fuel filter, and tank cap. The fuel tank is the component that holds the fuel for the engine while the fuel lines circulate the fuel throughout the engine.A new fuel tank assembly may be needed if the original is cracked, broken, or damaged in any way. Over time, the fuel tank may become damaged due to the constant vibrations that it experiences. If this is the case, it will need to be replaced to ensure the operator's safety. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This part is a genuine Husqvarna part. It is sold individually. This particular fuel tank assembly is compatible with leaf blowers that are manufactured by Husqvarna, Poulan, and Craftsman.

Here is a replacement fuel tank for use with a range of different models of small engines. The fuel tank plays one of the most important roles in a machine with an internal combustion engine. The tank holds the gas, which flows through the fuel line, so the machine can operate. Although fuel tanks are durable and built to last, there could be any number of reasons that one may need to be replaced. On older machines, for example, the fuel tank could have become damaged or corroded. Even newer machines could have a faulty fuel tank that would need to have a replacement. If there is an issue with the tank, it is not a replacement that can wait. The tank could be leaking fuel, for example, which can be wasteful as well as dangerous. This genuine OEM replacement fuel tank is identical to the one that came with the machine. It is sold individually and does not include any of the hardware needed for replacement. It can work with dozens of models of tillers, log splitters, and other small engines. Compatible brands include Troy-Bilt, Cub Cadet, MTD, HUSKEE, MasterCut, and Yard Machines.

The plastic fuel tank is responsible for storing the fuel that will be used by the lawn and garden equipment. The fuel tank is meant to be durable. However, this does not mean that it can't become broken. Damage to the fuel tank could cause a leak, which could be dangerous and waste fuel. Whether it is through wear and tear or an accident that causes a problem with the gas tank, such as a hole, it will need to be replaced. This is a genuine OEM replacement fuel tank that will work with string trimmers, edgers, and leaf blowers. It is compatible with models from Craftsman, MTD, Cub Cadet, and Troy-Bilt. It is important to note that this product is sold individually. It does not come with the fuel cap that will be needed to keep the fuel tank safe from an influx of air and debris. The cap will need to be purchased separately. Buyers should always make sure the tank they are choosing will work with their make and model.

This is a genuine OEM replacement fuel tank that is sourced directly from the manufacturer. It is used in various trimmer models and holds the fuel for operation. When the machine is not in use for long periods, the fuel that is in the tank causes the tank to become brittle. Exposure to the elements and normal use may also cause damage to the tank. Cracks, pinholes, leaking fuel lines, or bad O-rings in the fuel cap can all lead to fuel loss that not only affects engine performance, but that could also be a safety hazard.Turn the engine off and allow it to cool. Empty the fuel into a clean container to reuse later. Disconnect the fuel lines from the fuel pump. These lines are part of the fuel tank. Remove the fuel tank and lines. Install the new fuel tank with fuel lines. Refill with fuel and apply the fuel cap. Reinstall the spark plug. Check the new fuel tank for leaks.This fuel tank is made of high-quality white plastic with a black cap. It is sold as an individual unit complete with attached fuel lines and a fuel cap. It is compatible with string trimmers manufactured by MTD, Troy-Bilt, and Cub Cadet.

This is a genuine replacement fuel tank for a tiller. The fuel tank holds fuel for the tiller and connects fuel tubes to distribute fuel to the engine. Tiller fuel tanks may start to leak if it is cracked, punctured, or otherwise damaged. In addition to losing fuel, this is a serious safety hazard. If damaged, this part should be replaced before using the tiller. Do not attempt to repair a damaged fuel tank.Fuel tank replacement is a simple process. This project will require different tools depending on the model of tiller. Remove the fuel lines and fuel tank completely from the tiller. Remove the tiller fuel tank by unscrewing any bolts connecting the fuel tank to the engine. Set up the new fuel tank with the filter, fuel level indicator, and fuel cap. Reinstall the fuel lines from the engine to the fuel tank, and reattach the new fuel tank with the previous or new bolts.This is a genuine OEM replacement part. This part is compatible with Craftsman, Troy-Bilt, and MTD brands. This part is sold separately.

As a small engine fuel tank, this part is designed to ensure your engine is secure, vented, and has clean fuel at all times. Many fuel tanks come with a vented gap to prevent pressure or a vacuum from being created in the fuel system. If fuel is coming out of the cap, a replacement cap may be required. Maintenance should be done on the fuel tank if you notice leaking or see debris floating in the tank. Repairing a damaged tank can result in fuel contamination, leakage, or fire, so replacement is the favored option. If the tank is damaged or cracker, replacement is required. The fuel should be drained before starting with the replacement process. This fuel tank is designed to attach to leaf blowers manufactured by Weed Eater, Craftsman, and Poulan. The fuel tank is a genuine OEM component that comes directly from the manufacturer. It comes as an individual part and does not include a fuel filter. The part is white and weighs less than six oz with dimensions of 9 x 3 x 2.5 inches. Attaching a new fuel tank will require the use of a hex screwdriver.

This is a fuel tank assembly that is made to be used with several models of leaf blowers from various manufacturers. It works with handheld blowers and includes a full assembly with the fuel tank, fuel cap, and fuel lines. This component is part of the fuel system and should be replaced immediately if it is damaged or cracked as it can be dangerous to use it in that state. When replacing the fuel tank assembly, make sure the leaf blower is turned off. Disconnect the spark plug wire and drain the gas from the tank before moving forward with this project. A screwdriver is needed to make the repair and work gloves will also be useful. Take out the screws that hold the fuel tank and then remove the fuel lines. The new replacement fuel tank can be installed before the fuel lines are added and the cap is placed on top.This is an authentic OEM replacement part that has been sourced directly from the manufacturer. The fuel tank assembly is sold as an individual item. It is made to be compatible with several leaf blowers manufactured by Yard-Man, Troy-Bilt, Craftsman, MTD, and Cub Cadet.