Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Crosley Parts

Best Seller
Crosley Freezer Door Shelf
Genuine Frigidaire part
By: Frigidaire
Part Number: 240351601

The Freezer Door Shelf is an OEM replacement part for Frigidaire refrigerators. This freezer door shelf is designed to keep items organized inside the freezer door while allowing for easy access. Approximately 11 inches in width and 5 inches in depth

Causes of a bad shelf can include wear and tear over time, exposure to excess weight or unbalanced loads, damaged or missing supports, or impact from fallen items. 

Symptoms of a bad shelf include:

  • Sagging or bending of the shelf surface
  • Items easily falling off or through the shelf  
  • Difficulty accessing freezer items due to unstable storage
  • Damage or deformity of shelf supports

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

Do-It-Yourself Stories from Customers like You A few door bins were broken   Antonio M. • Universal City , TX • February 02, 2015

ORDERED NEW ONES AND REPLACED THEM Read more

More
$47.95
Compare At:
$57.06
You Save:
$9.11

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Blower Wheel
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694089

The Blower Wheel is an OEM part for Whirlpool dryers. This component is crucial for the proper circulation of hot air within the dryer drum, ensuring efficient drying of clothes by directing airflow through the drum and out the exhaust.

Common causes of a bad blower wheel include accumulated lint and debris obstructing the wheel, physical damage from foreign objects, or general wear from prolonged use. A faulty blower wheel can significantly reduce drying efficiency and may cause the dryer to overheat.

Symptoms of a bad blower wheel include:

  • Longer drying times for clothes
  • Unusual noises during the drying cycle
  • Overheating of the dryer
  • Poor airflow from the dryer vent

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Will not tumble
  • Takes too long to dry
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Broken blower wheel on dryer   Mark B. • Independence , WV • April 12, 2014

I FOUND the website on t internet, found my part ordered it and watched the how to video ,repaired the dryer myself. Awesome Website. Read more

More
$33.48
Compare At:
$39.84
You Save:
$6.36

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Catch
Genuine Whirlpool part
By: Whirlpool
Part Number: W11429587

The Dryer Door Catch is an OEM part for Whirlpool dryers. It keeps the dryer door securely closed during operation.

A bad door catch can occur due to regular use, wear and tear, or accidental damage. If you notice that the dryer door is not staying closed or is popping open during the drying cycle, it may indicate a problem with the door catch.

Symptoms of a bad door catch include:

  • The dryer door not staying closed  
  • Difficulty in properly latching the door shut
  • Loud banging noises or vibrations 

Replace your faulty dryer door catch with this genuine OEM part to restore your dryer door. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

Do-It-Yourself Stories from Customers like You Dryer door catch broke, unable to close the door!   Stella H. • Beverly Hills , FL • April 10, 2020

I watched your video and had it fixed in less than 1 minute! Read more

More
$20.95
Compare At:
$25.14
You Save:
$4.19

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Lint Screen Housing Foam Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP339956

The Lint Screen Housing Foam Seal is an OEM part for Whirlpool dryers. This seal is placed around the lint screen housing to prevent air leaks and ensure that the dryer operates efficiently by directing airflow properly through the lint screen. By maintaining a tight seal, this foam helps to optimize the dryer’s performance, reduce drying times, and prevent lint from escaping into the internal parts of the dryer, which can lead to potential maintenance issues and decreased efficiency.

Symptoms of a failing lint screen housing foam seal include:

  • Increased lint buildup inside the dryer beyond the lint screen
  • Longer drying times due to inefficient air circulation
  • Excessive heat and humidity within the dryer

Causes of foam seal deterioration typically involve normal wear and tear, exposure to high heat which can degrade the material, or improper maintenance that can tear or dislodge the foam.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Takes too long to dry
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You Gas dryer did not heat and excessive lint inside the unit   James C. • New Boston , MI • July 20, 2017

Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered... Read more

More
$10.43
Compare At:
$12.41
You Save:
$1.98

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Defrost Timer
Genuine Whirlpool part
By: Whirlpool
Part Number: W10822278

The Whirlpool Defrost Timer is an OEM replacement part for Whirlpool refrigerators. The defrost timer regulates the automatic defrost cycle, which prevents ice buildup on the evaporator coils in the freezer compartment by sending a signal to the defrost heater to turn on and melt any ice buildup on the coils. 

Causes of a bad defrost timer can include mechanical wear over time, electrical failures, or internal component damage. Prolonged usage and voltage spikes can also affect the timer's functionality.

Symptoms of a bad Defrost Timer include:

  • Excessive frost buildup in the freezer compartment
  • The refrigerator or freezer not maintaining the set temperatures
  • Unusual noises coming from the appliance 
  • The appliance running continuously without cycling off

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Too warm
  • Fridge runs too long
  • Fridge too cold
  • Frost buildup
See more...
Do-It-Yourself Stories from Customers like You Defrost not working on upright 20 year old freezer   W D D. • Spring , TX • September 19, 2014

A word of thanks to AppliancePartsPros - they delivered in one day. Ordered at 4PM CDT and received the part by noon the next day. Also, Alicia in the help department was able to locate an electrical diagram for my old freezer. This was essential for proper setup and her persistence in tracking down the diagram was top notch. Now on to my problem. One day I opened the freezer and found frost and thawing food. I attributed this to the door hitting an item in the freezer and not completely... Read more

More
$33.95
Compare At:
$40.06
You Save:
$6.11

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Refrigerator Ice Maker Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 243297613

The Ice Maker Assembly is an OEM part for Frigidaire refrigerators. It is responsible for automatically producing batches of ice through a process of freezing water into cube form. The ice maker works in conjunction with the refrigerator's freezer compartment and water supply line to perform its ice production function. 

Symptoms of a faulty ice maker include:

  • Failure to produce ice cubes
  • Oddly shaped, sparse, or chunky ice output
  • Leaks or water pools in the freezer 
  • Strange noises coming from the ice maker area
  • Error codes shown regarding ice maker performance

Causes of a bad ice maker assembly can include issues with components like the mold heater, water valve, or agitator that are vital to the freezing process. Improper refrigeration temperatures or clogs preventing water flow can also negatively impact ice production.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Do-It-Yourself Stories from Customers like You The ice maker in the electrolux refrigerator (lemon) was broken   Brian M. • Creve Coeur , MO • June 12, 2015

I removed the old ice maker and installed a new one, along with changing the air and water filters. Read more

More
$93.70
Compare At:
$112.44
You Save:
$18.74

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Rack Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304535380

The Upper Dishrack Assembly is an OEM component specifically designed for Frigidaire dishwashers. It plays a crucial role in supporting dishes during the washing process and allowing for efficient circulation of water underneath to thoroughly clean all surfaces. 

Causes of a bad dishrack can include warping or bending of the wires over time due to heavy loads, or damage from impact or mishandling that causes bent wires or broken support beams. 

Symptoms of a bad upper dishrack include:

  • Dishes not drying completely
  • Dishes shifting or sliding during the wash cycle 
  • Standing water or poor water circulation underneath the rack
  • Rust or corrosion building up on dish surfaces

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

Do-It-Yourself Stories from Customers like You Upper and lower dish racks in our frigidaire dishwasher began to rust   Edward W. • Satellite Beach , FL • November 04, 2025

To say using Appliance Parts Pros made things as simple as it gets, is an understatement. I was able to order the parts simply by using their website and having my dishwasher make and model number. Images of the parts make confirming the order even better. They have an on line question/answer cue if needed and even offer a call in for advice number. Once the order arrived, I verified the parts and began installation. Take a few pictures of the appliance from different angles before you start.... Read more

More
$98.95
Compare At:
$117.75
You Save:
$18.80

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Gasket-Frzr Door
Genuine Frigidaire part
By: Frigidaire
Part Number: 241786014

The Freezer Door Gasket is an OEM replacement part for Frigidaire refrigerators. This gasket provides a secure seal around the freezer door, ensuring that cold air remains inside while keeping warm air out. It helps maintain consistent freezer temperatures for optimal food storage and prevents energy loss.

Causes of a bad freezer door gasket can include wear from regular use, exposure to temperature fluctuations, or damage from cleaning agents. Over time, the gasket may lose its flexibility, develop cracks, or become misaligned, compromising its ability to seal properly.

Symptoms of a bad gasket include:

  • Frost buildup or ice accumulation inside the freezer
  • Difficulty keeping the freezer door closed securely
  • Warm air entering the freezer, leading to inconsistent temperatures
  • Higher energy bills due to the freezer working harder to maintain cold temperatures

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Refrigerator door seals coming apart   John M. • Ormond Beach , FL • November 09, 2015

Replaced the seals Read more

More
$53.64
Compare At:
$59.60
You Save:
$5.96

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Drum Support Roller
Genuine Whirlpool part
By: Whirlpool
Part Number: WP37001042

The Drum Support Roller is an OEM part for Whirlpool dryers. It plays a critical role in supporting and stabilizing the dryer drum as it rotates, allowing clothes to tumble evenly and dry efficiently. This support roller ensures smooth, quiet operation and helps prevent unnecessary strain on the motor and other components.

Causes of a bad Drum Support Roller can include continuous wear from regular use, overloading the dryer, which puts extra strain on the rollers, and lack of maintenance, such as not cleaning the lint and debris that can accumulate on the rollers.

Symptoms of a bad Drum Support Roller include:

  • A thumping or rumbling noise during operation
  • The dryer drum not turning smoothly or at all
  • Excessive vibration of the dryer unit

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Beating and bumping like a pair of tennis shoes were inside   William R. • Simpsonville , SC • March 28, 2017

I pulled the dryer away from the wall and unplugged it. Then I used a 5/16 nut driver and removed the 2 screws in the bottom front panel and pulled it off. Next I removed the 2 5/16 screws holding the front door panel and pulled it down far enough to disconnect the wires for the light and the wires on the door switch. Then , using a putty knife I popped the springs holding the top and control panel then pulling the top up and resting it against the wall. Now I started my repair by laying on... Read more

More
$18.95
Compare At:
$22.74
You Save:
$3.79

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Heating Element
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255006

The Heating Element is an OEM part for Frigidaire ovens and ranges. It is responsible for providing the heat necessary for baking or broiling. The element converts electrical energy into heat through resistance; this heat is then distributed throughout the oven cavity to cook or bake food evenly. 

Common causes of a bad Heating Element can include visible signs of damage like blistering, bulging, or breakage. A burnout may occur when the element overheats and fails, leading to no heat production. Additionally, electrical issues like a blown fuse or faulty wiring can prevent the element from receiving power.

Symptoms of a bad Heating Element include:

  • The oven does not heat up
  • Uneven cooking or baking
  • Longer cooking times than usual
  • The element not glowing when the oven is turned on

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This part fixes the following symptoms
  • Little to no heat when baking
  • Oven not heating evenly
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You My oven stopped working properly on convection roast setting was was only heating up to about 200 degrees   Mark R. • Eastham , MA • May 15, 2015

One day, while trying to roast chicken on the convection roast setting, my Electrolux oven stopped heating properly. I tried the broil setting and the top electric heating element worked fine. I then tried the bake setting and found that the bottom element wasn't working at all. I Googled the problem. The info I found said that the issue was probably that the bake element needed to be replaced. It said to look for a break or burned through spot on the element. If it appeared OK, remove it... Read more

More
$146.95
Compare At:
$176.34
You Save:
$29.39

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Top Burner Receptacle Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 330031

The Top Burner Receptacle Kit is an OEM part for Whirlpool ranges and cooktops designed to provide a reliable electrical connection between the stove's top burners and the power source. This kit typically includes receptacles, wire terminals, and mounting hardware necessary for the installation, ensuring that each burner receives the proper electrical current to heat efficiently. 

Causes of a bad top burner receptacle can include corrosion due to spills or moisture, physical damage from heavy use, or natural wear and tear over time. 

Symptoms of a bad Top Burner Receptacle Kit include:

  • A burner that doesn't heat up
  • Intermittent heating or fluctuating temperatures
  • Visible signs of damage or corrosion on the receptacle
  • Sparks or short circuits when attempting to use a burner

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Our range needed 4 new range top elements due to wear   Dale D. • Orlando , FL • December 05, 2014

Personally I have experience working with electricity and knowing if I bought the part required this would be an easy fix. I got my model number and contacted Appliance Parts Pros and placed my order for the new elements, terminal blocks, and for appearance purposes 4 new Drip Pans. Excellent service and quick shipping. I ordered my parts on Sunday and received them on Tuesday. This was a simple repair that only required a screwdriver to remove the old terminal block from the range hood, wire... Read more

More
$15.66
Compare At:
$18.79
You Save:
$3.13

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Oven Igniter
Genuine Whirlpool part
By: Whirlpool
Part Number: 74007498

The Oven Igniter is an OEM part for Whirlpool ovens, designed to ignite the gas in the oven burner, allowing it to heat. This crucial component is responsible for creating the spark that starts the combustion process, enabling your oven to reach the desired temperature for baking or broiling.  

Causes of a bad oven igniter include wear and tear from regular use, a buildup of residue that can inhibit the igniter's ability to heat properly, or electrical issues that prevent the igniter from drawing enough current.

Symptoms of a bad Oven Igniter include:

  • Oven not heating up at all
  • Oven takes longer than usual to heat up
  • Gas smell when the oven is turned on, indicating gas is not igniting

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Little to no heat when broiling
  • Gas igniter glows, but will not light
  • Gas smell
  • Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You Oven ignigter not working.   Joan R. • Mount Judea , AR • March 20, 2014

I used the little video clip shown under the part and replaced it myself. Read more

More
$52.95
Compare At:
$84.49
You Save:
$31.54

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Refrigerator Shelf
Genuine Frigidaire part
By: Frigidaire
Part Number: 240358926

The Refrigerator Shelf is an OEM part for Frigidaire refrigerators. It is designed to provide a sturdy, flat surface inside the refrigerator compartment, offering a convenient space for storing and organizing food items. This shelf is made from materials that are designed to withstand the typical wear and tear of daily use, as well as the cold temperatures within the fridge.

Causes of a bad Refrigerator Shelf can include cracking due to excess weight, damage from sharp objects, or warping from exposure to extreme temperatures or moisture.

Symptoms of a bad Refrigerator Shelf include:

  • Visible cracks or breaks in the shelf,
  • Sagging or inability to hold items securely,
  • Difficulty sliding the shelf in or out if it is designed to do so.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You The shelves on the frigidaire refrigerator are extremely flimsy the frig only a few years old but have had many cracks wish they'd not use such cheap parts at least on the body   Norma N. • Hackettstown , NJ • January 25, 2015

Called Appliance Parts--vented a bit to a very kind and patient female voice--she gave me the part numbers. After grumbling yet again, I submitted the order. Expensive, but easier and cheaper than buying a whole new refrigerator! The parts arrived the next morning! I was amazed, since I'd called in the afternoon. Put them in--all well! Looks great--like new--at least for now! Read more

More
$74.46
Compare At:
$91.99
You Save:
$17.53

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Outer Oven Door Glass
Genuine Frigidaire part
By: Frigidaire
Part Number: 316452758

This Outer Oven Door Glass is an OEM replacement part for Frigidaire ranges. It is the outermost glass panel on the oven door. It acts as a barrier to prevent heat from escaping the oven. If the glass is cracked or broken, it can lead to heat escaping and uneven cooking.

A broken outer oven door glass can be caused by a variety of factors, including accidental impact, thermal shock, or improper cleaning.

Symptoms of broken door glass can include:

  • Cracks or shattered glass
  • Difficulty maintaining the temperature inside the oven

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Do-It-Yourself Stories from Customers like You The outer door glass shattered when opening the door   Robert C. • Lake Ozark , MO • May 21, 2017

I searched for my appliance and the problem. Applianceparts.com was one of the results. There was one fix-it help from a previous customer. I ordered the piece of glass and somehow it arrived at my home the VERY NEXT DAY! I couldn't believe it. So I followed the exact instructions left by the one person that wrote in. I removed 2 screws at the bottom of the door and 4 at the top which enabled me to disassemble the front and back of the door. I then cleaned all the shattered pieces of glass... Read more

More
$132.95
Compare At:
$158.21
You Save:
$25.26

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Water Valve
Genuine Frigidaire part
By: Frigidaire
Part Number: 242252603

The Water Valve is an OEM part for Frigidaire refrigerators. It is crucial for controlling the flow of water to the ice maker and water dispenser. This solenoid-operated valve responds to commands from the refrigerator's electronic control to supply water when needed, ensuring efficient operation and reliable delivery of ice and water.

Symptoms of a bad Water Valve include:

  • No water being dispensed
  • The ice maker not producing ice or producing very small ice cubes
  • Water leaking from the valve

Causes of a bad water valve can include mineral deposits blocking the valve, electrical failures preventing the valve from opening, or wear and tear from normal use leading to leaks or operational failures.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Ice maker not making ice
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Ice maker quit making ice was not getting water   James M. • Natchitoches , LA • July 26, 2015

This was one of the easiest appliance repairs that I have ever done. I simply moved the refrigerator out of the cubby hole in which it resides, turned off the water supply at the wall, unplugged the electric cord, loosened the water supply line at the valve (had a water absorbent rag and small plastic bowl to catch what drained from the line), place it in the bowl and moved it aside. The valve was easily accessible and two screws detached it from the edge of the refrigerator box. Once loose, I... Read more

More
$47.33
Compare At:
$55.85
You Save:
$8.52

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Crosley Rack Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304535379

The Dishwasher Rack Assembly is an OEM part for Frigidaire dishwashers. It provides an adjustable racking system inside the dishwasher tub to accommodate varying sizes of dishes, utensils, and cookware on multiple shelf levels. The rack assembly measures about 22"x 21"x 9" including the wheels.

Symptoms of a bad rack assembly include:

  • Broken or missing rack wires that compromise integrity
  • Shelves that will not stay locked into desired positions
  • Rust or corrosion buildup weakening structural components
  • An inability to fully extend or retract racks from the tub

Causes of a bad rack can include deterioration of rack materials from repeated wash cycles, broken mounting connectors, or damage from improper loading methods that put undue stress on the racks.

As an OEM replacement, this Frigidaire dishwasher rack restores safe and dependable use of the cleaning space. This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Do-It-Yourself Stories from Customers like You Upper and lower dish racks in our frigidaire dishwasher began to rust   Edward W. • Satellite Beach , FL • November 04, 2025

To say using Appliance Parts Pros made things as simple as it gets, is an understatement. I was able to order the parts simply by using their website and having my dishwasher make and model number. Images of the parts make confirming the order even better. They have an on line question/answer cue if needed and even offer a call in for advice number. Once the order arrived, I verified the parts and began installation. Take a few pictures of the appliance from different angles before you start.... Read more

More
$88.95
Compare At:
$104.96
You Save:
$16.01

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store