Deflector & Chute

This lower chute is a quality replacement part that is used on several models of snowblowers. It is made of high-quality plastic for durability and is placed so it can direct snow in a certain direction when it leaves a snowblower. Over time and with regular use, this part can become damaged. If this occurs, it will need to be replaced so the discharged snow ends up in the right location.When replacing the lower chute, a wrench and work gloves will be needed. The snowblower should be placed on a flat surface, and the spark plug wire needs to be disconnected. The gearbox and the lower chute will need to be removed before the new replacement part can be installed. Line up the chute and install it used the cotter pin and flange lock nut. Replace all the components before using the snowblower.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold on an individual basis. The lower chute is used with snowblowers manufactured by Craftsman, Cub Cadet, Huskee, MTD, Troy-Bilt, Yard Machines, and Yard-Man.

This is a genuine replacement for select walk-behind push lawn mowers. The hinged mulch cover is designed to replace the clippings chute that allows discharge so that the grass is more finely mulched in the machine. This part includes a metal hinge, which can break or snap over time. The plastic itself can also become damaged by debris or impacts, or simply crack due to age. Replacing the mulch cover with a genuine OEM model like this can be the ideal solution. If the cover is not replaced, the mulching feature will not be able to be used. This OEM replacement mulching cover is compatible with lawn mowers from MTD, Yard Machines, Yard Man, Troy-Bilt, Cub Cadet, Bolens, and Husky. This product includes the metal bracket and spring that are required for installation and securing the cover, sold as a single assembly. This hinged mulching cover can be used with 150+ lawn mowers from the brands listed above. No tools are required for this part replacement but it is important to be careful of pinch injuries when working with parts like this spring-hinged cover.

A train shield is found on many walk-behind lawn mowers. It is located on the rear side of the lawn mower. The function from the position where it is mounted is to keep grass from expelling from the mower deck. With use or as a result of accidental impact, the train shield may become damaged or fall off. If the train shield is broken or missing, it will allow grass to come out from the mower deck, which poses a safety risk. Check to see if grass is being expelled from the motor deck.Installing a train shield on a lawn mower is an easy task. There is hardware required to secure the part in place. Wear gloves for protection. Make sure the machine is entirely cool.This train shield is a genuine OEM replacement part. It is sourced from the manufacturer. The train shield is made of durable, high-quality plastic. It is sold individually. The train shield can be installed on MTD, Troy-Bilt, Yard-Man, Bolens, Yard Machines, Cub Cadet, and Huskee brand lawn equipment. It is compatible with several models of walk-behind lawn mowers.

This part is a lower chute that is an integral component of a grass bagger attachment for a riding lawnmower. This lower chute attaches to the deck and the upper chute. It is manufactured out of a durable plastic material that is black in color.A new lower chute may be needed if the original is cracked, broken, or damaged in any way. If the lower chute comes into impact with a hard surface such as a large rock, it can be broken and will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines. Never perform care and maintenance on a machine that is powered on.This lower chute is a genuine Husqvarna part. It is sold individually. This particular lower chute is compatible with riding lawnmowers with a grass bagger attachment that are manufactured by the Husqvarna brand.

This is a replacement mulch plug. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended to replace a broken or detached mulch plug on various lawnmower models.Mulch plugs are essential to stopping the mower from discharging grass clippings in order to mulch them. Without the mulch plug, grass clippings will be cleared from the lawnmower before becoming mulch. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is turned off and completely cooled down before starting any repairs. Proper tools are required to replace this part and work gloves are advised. For more accurate information on how and where to install this mulch plug, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this mulch plug is suitable for use on several different lawn mower models manufactured by MTD, Troy-Bilt, and Cub Cadet. This is a genuine part made of high-quality, durable, non-corrosive materials and is sold individually.

This replacement part is a mulch door intended for use in lawn mowers. It closes the discharge chute so that grass cuttings can be recut and turned into mulch.The mulch door can become damaged from impact. If bent or worn out, it may become stuck or fall out of place, necessitating replacement.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This replacement part is a deflector shield. It is a genuine replacement part made by Husqvarna. This deflector shield works with the bagging chute so that the leaves and other debris end up in the proper place. This deflector shield is made of durable plastic so that it lasts a long time after replacement. A new deflector shield might be needed if the current one is damaged or broken in any way. This can include being cracked or dented. If the deflector is unable to connect to the main parts of the mower it might be time to replace this part. Reference the specific user manual for more detailed information on how to begin this repair. This part is sourced directly from the manufacturer and is a genuine OEM replacement part. This deflector shield is sold individually.

This is a shield deflector, or a grass deflector, that is used on certain models of lawn tractors and walk-behind lawn mowers. The shield deflector is designed to ensure that the debris that expels from the mower deck is not projected upward or toward the person that is mowing. When it is cracked or missing, the clippings and debris could fly out in any direction and cause injury or damage. The shield deflector is made of durable plastic but it is also subject to constant vibrations and ground impact, which can lead to damage. Replacing a broken shield deflector will ensure that the mower is safe to use and that debris is not flying in all directions. This part will require a wrench or socket, as there are two screws or bolts holding it in place. This genuine OEM deflector is manufactured by Husqvarna and can be used with select machines from the brand, as well as certain models from Craftsman, Poulan, and Jonsered. It is sold as an individual part and the hardware to secure the deflector is sold separately.

This is a replacement lawn tractor shield-deflector. The shield-deflector, or grass chute, is made from strong, high-quality plastic and attaches to the lawn tractor deck's side. Its purpose is to direct grass clippings and other debris away from the rider while mowing. Over time, the original shield-deflector can become worn and damaged, allowing debris to blow up onto the lawn tractor driver. Debris expelled from the lawn tractor can cause property damage, injury, or even death. Ensure the area is always clear of bystanders while mowing and consult the operator's manual to ensure proper installation of all replacement parts.This shield-deflector is designed to be a replacement for original worn or damaged shield-deflectors on AYP, Jonsered, Redmax, Craftsman, Poulan, Husqvarna, Poulan Pro, Weed Eater, and McCulloch 46-inch lawn tractor decks. This replacement shield-deflector is an OEM part that is sourced directly from the manufacturer. The shield-deflector is sold individually and does not come with hardware included. Tools needed for replacement may consist of; 1/2 inch socket, 7/16 inch socket, vise-grip pliers, a large flat-head screwdriver, and a hammer.

A clipping deflector is a lawnmower attachment designed to guide and direct grass clippings away from the equipment itself. When attached, it allows the lawnmower to transform into a side discharge tool. It is made from flexible plastic material. If it develops cracks and holes or its attachment hooks break, the clipping deflector needs to be replaced. It is a quick and straightforward process that requires no tools. The deflector is located beneath the mulch door. Simply hold the mulch cover and lift it up. Use your other hand to pull the broken deflector away from the mulch cover hinge pin. Then, attach the new deflector's tab into the mulch's hinge pin. Lastly, lower the mulch cover to its original position. This brand-new, OEM Husqvarna clipping deflector replacement is explicitly made for Craftsman and Husqvarna lawnmower models. This replacement part is sold individually.