Dryer Door, Door Glass & Parts

This outer door frame is the replacement trim that surrounds the appliance's front door, restoring a secure fit and finished appearance. It replaces a cracked, dented or worn frame to help the door close properly and look like new. What it does:

• Replaces damaged or cosmetic outer door trim to restore the door's appearance
• Secures and surrounds the door glass/inner assembly to keep parts aligned
• Helps maintain a proper door fit so the door closes and latches correctly
• Commonly used when the frame is cracked, bent, or shows excessive wear

• Disconnect power to the appliance before starting any repair.
• Handle glass and trim carefully to avoid breakage and injury.
• Some disassembly of the door may be required.
• After installation, verify the door opens, closes and seals properly before returning the appliance to service.

This is a replacement outer cabinet door that restores the refrigerator's sealed closure and appearance. Replacing a damaged or dented door helps maintain proper cooling and keeps contents protected while improving the appliance's look. What it does:

• Replaces a cracked, dented, or bent outer door panel to restore fit and appearance
• Helps the door close and seal properly to maintain interior temperature
• Stops drafts and reduces moisture/condensation caused by poor door fit
• Prevents further wear to hinges, gaskets, and internal components from a misaligned door

• One complete outer door panel

• Door assemblies can be heavy or awkward
• Disconnect power and empty the appliance before removing the old door
• Retain and transfer existing hinges, screws, trim, and gasket unless new hardware is explicitly included
• Verify hinge alignment and gasket seating during reinstallation to ensure a proper seal

This outer refrigerator door replaces a damaged or worn exterior door panel so your fridge seals and looks like new. It restores proper closure and helps maintain internal temperature control and appliance appearance. What it does:

• Replaces a damaged, dented or cracked outer refrigerator door panel
• Restores a straight, secure door edge for better sealing and operation
• Helps prevent cold air loss that can cause temperature fluctuations
• Improves appliance appearance by replacing scratched or faded exterior finish

• One outer refrigerator door panel

• Disconnect power and empty the door before starting; remove any screws or hinge covers securing the door
• Lift or support the door while removing hinge fasteners to avoid dropping or damaging the cabinet
• Align hinges and test door swing and seal before tightening all fasteners
• If inner components (bins, trim, gaskets) are attached, they should be properly reinstalled or transferred per manufacturer instructions.

A complete replacement door assembly that restores proper closing, sealing and appearance to the appliance. Replaces a damaged, cracked or warped door so the appliance can operate safely and efficiently. What it does:

• Replaces the full door structure including outer panel and mounting points so the door closes and latches correctly
• Restores a proper seal to help maintain internal temperature and performance
• Eliminates cosmetic damage such as dents, cracks or peeling finish
• Provides the mounting surface for hinges, latch and any attached trim or glass
• Helps stop symptoms like a door that won't close, visible damage, or gaps around the door

• Disconnect power and empty the appliance before starting work
• Handle the door carefully to avoid scratching or damaging the finish; glass panels can be fragile
• Installation may require removing trim, hinge fasteners and re-aligning the door; have basic hand tools ready
• If the door is heavy or awkward, use a second person to support it during removal and installation

This inner door frame is the replacement inner panel that secures the door's inner components and helps restore proper fit and appearance. It is a direct-fit inner door panel used in LG appliances. What it does:

• Replaces a cracked, warped, or damaged inner door frame that can cause poor fit or cosmetic damage
• Secures the inner glass and internal door components for safe, reliable door operation
• Can reduce air/steam escape around the door when the inner panel is intact
• Restores the door's original appearance and alignment

• One inner door frame

• Disconnect the appliance from power before starting any repairs
• Removal may require detaching the door and removing retaining screws; handle glass and sharp edges carefully
• Keep all screws and clips organized for reassembly; verify proper alignment before tightening fasteners

This is the oven door outer panel that restores the exterior finish and protects the oven cavity. It replaces damaged or dented outer door panels so the appliance looks and functions like new again. What it does:

• Covers the front of the oven, protecting internal components from spills and heat
• Restores the appliance's exterior appearance and helps maintain proper door fit
• Helps the door seal correctly to support even cooking temperatures
• Stops drafts or heat leakage caused by bent or damaged outer panels

• One outer oven door panel

• Disconnect power to the appliance before starting any repair
• Door panels can be heavy or have sharp edges — use gloves and get a helper if needed
• Follow the oven manufacturer's service instructions for hinge and trim removal

This outer oven door replaces a damaged or worn exterior door panel to restore the appliance's barrier and appearance. It provides a secure closure for normal cooking and helps contain heat inside the oven cavity. What it does:

• Replaces a cracked, dented, or cosmetically damaged outer oven door panel
• Restores a secure closure so the oven can maintain proper cooking conditions
• Helps protect internal components and users from heat exposure
• Improves the appliance's exterior appearance

• Disconnect power to the appliance before starting any repair
• Door assemblies can be heavy and awkward—use two people to lift and position
• Handle glass and edges carefully to avoid breakage or injury
• Follow the manufacturer's service instructions for hinge removal and reinstallation

This cabinet door assembly replaces a damaged or dented appliance door to restore appearance and proper closure. It provides the exterior panel and mounting points needed to secure and seal the appliance compartment. What it does

• Replaces a cracked, dented or bent door panel to restore a flush, finished look
• Provides the mounting surface and attachment points for hinges and trim
• Helps the door close and latch properly to maintain internal temperature
• Stops drafts and reduces energy loss from a damaged exterior door

• Disconnect power and empty the compartment before starting any repair
• Handle any glass, trim, or painted surfaces carefully to avoid damage
• Follow the appliance manufacturer's instructions or service manual for model-specific steps

This is a genuine replacement freezer door panel that restores the exterior finish and proper sealing of your freezer compartment. It replaces a damaged, dented, or bent door panel to help keep cold air inside and maintain appliance appearance. What it does

• Replaces a damaged or dented freezer door panel to restore the unit's exterior and fit
• Helps maintain an effective seal so the freezer holds temperature more reliably
• Prevents warm air infiltration that can cause frost buildup or reduced cooling efficiency
• Matches original mounting points for a correct fit and alignment

• One freezer door panel

• Disconnect power and empty the door before starting; follow the appliance manual for safe removal
• Typical install requires removing hinge screws and transfer of any trim, insulation, or hardware to the new panel
• Keep small fasteners and trim parts organized; confirm orientation before tightening hinges