Dryer Knob, Dial & Button

Replace your dryer's timer dial if it's cracked, broken, or won't turn properly. This control dial mounts on the timer shaft to set drying cycles.

Replace your dryer's control knob to restore cycle selection. Mounts on the console control shaft. Order a new knob if yours is cracked, stripped, or missing.

Selector knob for washer control panels. Replace this part if your current knob is cracked, broken, loose, or missing from the control interface.

The Knob is an OEM component specifically designed for Whirlpool electric dryers. Located on the control panel, the knob allows for the selection of desired drying time, temperature, or fabric care settings. Its sturdy construction assists millions of adjustments over the appliance's lifespan.

Causes of a bad knob can include normal wear from continuous rotation breaking down grease on internal mechanisms. Over-tightening during installation may crack the plastic.

Symptoms of a bad knob include:

• Difficulty selecting options or inability to turn  
•  Knob slipping out of set position during drying  
• Loose, shifty, or jittery feeling during adjustment
• Cracked or broken casing tabs exposing internal parts

This OEM Whirlpool part is also compatible with KitchenAid, Maytag, Amana, Roper, Admiral, and some Kenmore dryers. 

Replacement control knob for dryer control panel. Restores tactile selection of heat, cycle, and temperature settings. Replaces cracked, missing, or worn knobs.

A replacement control knob that restores reliable manual control of a dial or selector. Fits standard splined control shafts to make setting temperatures, cycles or power levels easy and intuitive. What it does

• Provides a secure grip and clear rotation for selecting settings on the appliance's control shaft
• Replaces cracked, worn or missing knobs that are hard to turn or won't stay in position
• Restores tactile feedback and alignment so settings register correctly with the control shaft
• Useful when original knob splines are stripped or the outer cap is damaged

• Typically installs by aligning splines and pushing firmly onto the control shaft until seated
• Power to the appliance should be turned off when removing and installing control parts
• Do not force the knob onto a shaft that does not match; verify spline match before installation
• If knob does not engage or control still fails, the underlying switch or shaft may need inspection

Start button switch for dryers and washer-dryer combos. Replaces worn, cracked, or unresponsive buttons. Mounts on control panel for cycle activation.

Replace your dryer's broken or missing control knob. This dial installs on the control panel to operate cycle and temperature settings. Standard knob.

Replacement knob assembly that restores control and precise selection of settings on your appliance. Fits the original control shaft and provides a secure grip for adjusting temperature, cycle, or power settings. What it does

• Restores user control when the original knob is cracked, melted, stripped, loose, or missing.
• Provides a clear indicator/pointer for accurate selection of settings.
• Matches original fit and function to prevent slipping or uneven engagement with the control shaft.
• Helps resolve symptoms like a knob that won't turn, slips on the shaft, or has a broken pointer.

• Always disconnect power to the appliance before servicing; shut off gas supply for gas ranges.
• Typically installs without tools—remove the old knob by pulling it straight off, then press the new knob onto the control shaft.

Color: gray. The back part of the knob measures about an inch in diameter, and the front part with the handle is about 2 inches in diameter.

White plastic timer knob for dryers. Replaces broken, cracked, or stripped control knobs. Installs on the control panel for cycle selection.

Restore smooth, accurate control with this replacement control knob. It fits onto the selector or timer shaft so you can choose cycles, temperatures, or time and replace a cracked, stripped, loose, or missing knob.

• Attaches to the control shaft to operate a switch, timer, or thermostat
• Provides a secure grip for selecting cycle, temperature, speed, or time
• Resolves issues like free-spinning, slipping, or knobs that won't stay on
• Helps when settings can't be adjusted due to a damaged or missing knob

• Disconnect power before servicing to prevent accidental start
• Pull the old knob straight off; avoid twisting the control shaft
• Align the new knob with the shaft and press firmly until fully seated
• If your original knob had a removable insert/retainer, transfer it to the new knob

Almond