Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Electrolux Belt

Best Seller
Electrolux Dryer Drum Belt
Genuine Frigidaire part
By: Frigidaire
Part Number: 134503600

The Dryer Drum Belt is an OEM replacement part designed for use with Frigidaire dryers. This critical component is responsible for turning the drum of your dryer, allowing your clothes to tumble freely and dry evenly. 

Causes of a bad Dryer Drum Belt can include wear and tear from regular use, overloading the dryer, which puts extra strain on the belt, or exposure to excessive heat, which can cause the belt to become brittle and break.

Symptoms of a bad Dryer Drum Belt include:

  • The dryer motor running but the drum not turning
  • Unusual noises, such as thumping or squealing, coming from the dryer when it is running
  • The dryer not starting at all, in some cases

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models, ensuring a wide range of users can benefit from its reliable operation.

NOTE: Please note that this dryer drum belt is sold individually. Any additional parts or hardware will require additional purchases.

This part fixes the following symptoms
  • Will not tumble
See more...
Do-It-Yourself Stories from Customers like You After 7 years of quiet service the dryer drum started squeaking very loud!   Douglas D. • Columbia , MO • March 08, 2016

I found a video on Youtube which described dryer drum squeaks as most likely caused by a worn rear drum bearing. I located the model number on the inside lip of the dryer door: Frigidaire Affinity LEQ6000ES2. I googled "frigidaire affinity dryer squeak". I got a link for my friends at AppliancePartsPros.com! I've used Appliance PartsPros 3 times before, so I figured I was in a "one-stop-solution" situation. I ordered a rear drum bearing kit as well as a dryer drum belt (after nearly 7 years... Read more

More
$14.95
Compare At:
$17.79
You Save:
$2.84

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electrolux Washer Drive Belt
Genuine Frigidaire part
By: Frigidaire
Part Number: 134511600

The Washer Drive Belt is an OEM part for Frigidaire washing machines. This belt connects the motor to the drum, enabling the drum to rotate during the wash and spin cycles. It ensures the proper transfer of power from the motor to the drum, allowing the washer to agitate and spin effectively.

Common causes of a bad drive belt include normal wear and tear, overloading the washer, or a misaligned drum that puts extra strain on the belt.

Symptoms of a bad washer drive belt include:

  • The washer drum not spinning or agitating
  • A burning smell during operation
  • Unusual noises such as squealing or grinding
  • The washer stopping mid-cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Spins slowly
  • Burning smell
  • Pumps but will not spin
  • Will not agitate
See more...
Do-It-Yourself Stories from Customers like You Noisey bearing on spin cycle   Neal G. • Klamath Falls , OR • February 14, 2016

I replaced the spin bearing, tub seal, washer and drive belt since I had it all apart. The video was extremely helpful...I would have tore the whole thing apart trying to figure out how the agitator came off....but it was very simple. Read more

More
$20.95
Compare At:
$24.93
You Save:
$3.98

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electrolux Drive Belt
Genuine Frigidaire part
By: Frigidaire
Part Number: 134719300

The Drive Belt is an OEM replacement part for Frigidaire dryers. It plays a crucial role in transferring the rotational motion from the dryer's motor to the drum, enabling the tumbling action necessary for drying clothes.

Symptoms of a need to replace the drive belt include:

  • The dryer drum not turning or rotating during cycles
  • Loud thumping or squeaking noises coming from the dryer
  • Visible wear, cracks, or fraying on the existing belt

Causes of a faulty drive belt can include general wear and tear over extended use, exposure to high temperatures or lint buildup, physical damage from foreign objects, or manufacturing defects in the belt material or construction.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryer models. 

Do-It-Yourself Stories from Customers like You Noisy electric dryer on startup   John B. • Wenatchee , WA • January 29, 2018

Disassembled dryer. Installed new belt, drum rollers, idler arm and blower. Read more

More
$53.72
Compare At:
$63.93
You Save:
$10.21

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electrolux Drum Drive Belt
Genuine Frigidaire part
By: Frigidaire
Part Number: 134051000

The Drum Drive Belt is an OEM part for Frigidaire dryers. It connects the drum to the motor, enabling the drum to rotate and tumble the clothes during drying cycles. The belt is 54 inches long and 5/8 inches wide

You should replace this drum drive belt if it becomes worn out, frayed, or broken due to the high heat and friction involved in the drying process. Additionally, improper loading or overloading of the dryer can cause the belt to stretch or snap.

Symptoms of a bad drum drive belt include:

  • Dryer drum not turning
  • A loud thumping or squealing noise during operation
  • Dryer stopping mid-cycle
  • Clothes remaining wet after the drying cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Spins slowly
See more...
Do-It-Yourself Stories from Customers like You Severe banging during spin cycle   Vince V. • Benson , AZ • March 03, 2019

With more difficulty and frustration than expected but it works fine now. Things learned: 1. Order only 3 replacement pins. One comes with the shocks that you can't be sure you see in the picture. 2. A circuit board in a plastic box mounted to the floor, left rear, must be removed by two screws to be able to get pliers onto the head of the pin more easily. This helps installation too. 3. A 1/2" deep socket pushed onto the retaining tab of the pin stays there while you pull with pliers from the... Read more

More
$21.95
Compare At:
$30.17
You Save:
$8.22

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electrolux Drive Belt (Washer)
Genuine Frigidaire part
By: Frigidaire
Part Number: 134616700

This washer drive belt links the motor to the drum pulley so the machine can tumble and spin. Replacing a broken or stretched belt restores smooth, reliable drum rotation during wash and spin cycles.

  • Transfers motor power to the drum for tumbling and spin
  • Worn or broken belts can cause no spin/tumble or intermittent rotation
  • Common symptoms: drum won't spin, squealing or thumping noises, burning rubber smell, visible fraying/cracks
  • Slipping belt can leave clothes wetter than normal at cycle end
What's included: 1 drive belt Install notes:
  • Disconnect power and turn off water supplies before servicing
  • Access the belt from the rear or bottom; remove panels as directed in your model's service information
  • Release belt tension at the motor/idler, remove the old belt, and route the new belt over the drum and motor pulleys with ribs properly seated
  • Rotate the drum by hand to verify alignment; reassemble and test. Inspect the idler/tensioner and pulleys while open

Do-It-Yourself Stories from Customers like You My KenmoreElite washer wasn't spinning at appropriate times during various cycles kept giving me the "srv cll" message on the display   Gregg S. • Georgetown , KY • October 02, 2019

Since I hadn't found the Tech Sheet for the washer (which there should be one inside the top cover) I simply thought I'd buy the drive motor (and a new belt, a.k.a "cheap insurance"). Installed the motor once I'd received it from AppliancePartsPros, the washer worked a couple of cycles then gave me the same "SrV CLL" message. I didn't know how to access the error codes on this model but found the info in the Tech Sheet, so I checked it and got an E53 code. Since I'd replaced the motor... Read more

More
$49.95
Compare At:
$59.44
You Save:
$9.49

IN STOCK
Ships Today Guaranteed
Add to Cart
Electrolux Belt
Genuine Frigidaire part
By: Frigidaire
Part Number: 137051400

This replacement belt links the drive motor to the appliance's drive system so the drum or tub can rotate during operation. Replacing a stretched, cracked, or broken belt restores proper movement and reduces slippage and noise.

  • Transfers motor rotation to the drum or tub to enable tumbling or spinning
  • Common symptoms: drum/tub not turning, intermittent movement, or cycle runs but contents don't tumble/spin
  • Squealing, thumping, or burning-rubber odor from belt slippage
  • Visible fraying, glazing, or cracks on the belt surface
What's included: 1 belt
  • Disconnect power and allow the unit to cool before servicing
  • Note belt routing/tension before removal; take a photo for reference
  • Inspect idler/tensioner and motor/drum pulleys; replace worn components to prevent premature belt wear
  • After installation, hand-rotate the system to verify alignment and tracking before test run

Do-It-Yourself Stories from Customers like You Washing machine drive belt worn out   Curtis R. • Englewood , TN • June 06, 2015

Ordered the part from appliance part pros. Was the right belt to fit my frigidaire affinity washer. I got on you tube for an installation demo. Follow the procedure and replaced it properly. It is now working great. Thanks. Read more

More
$46.95
Compare At:
$56.34
You Save:
$9.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Electrolux Belt
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304461177

 

More
$47.95
Compare At:
$48.10
You Save:
$0.15

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Best Seller
Electrolux Drive Belt
Genuine Frigidaire part
By: Frigidaire
Part Number: 134051003

The Drive Belt is an OEM part for Frigidaire washing machines. This part transfers the rotational force from the motor to the drum, enabling the tumbling action during wash cycles.

Causes of a bad Drive Belt include wear and tear over time, exposure to excessive heat or moisture, or physical damage from improper installation or foreign objects.

Symptoms of a faulty Drive Belt include:

  • Loud squeaking or grinding noises during the wash cycle
  • The drum not spinning or rotating properly
  • Slipping or failure to agitate during wash cycles
  • Excessive vibrations or shaking from the washer

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You No error codes; just lots of noise and movement   James S. • Winchester , TN • April 29, 2023

After a few days of our 16 YO Frigidaire Affinity front-loading washer (model ATF7000EG0) dancing around the room bellowing like an elephant in musth, I decided to fix it. Well, technically, my wife decided I would fix it. I postulated that the OEM tub suspension system was rapidly deteriorating, so I ordered the shock absorber kit (5304485917), three nylon pins (131268300), two suspension springs (134362800), and a new drive belt (134051003) for good measure. These parts all arrived in... Read more

More

Electrolux belt replacement parts are crucial for keeping your appliances running smoothly. Whether you rely on an Electrolux washer, dryer, or other appliances, the belt plays a key role in maintaining optimum functionality. Over time, these belts can wear out, affecting the performance of your appliance. Replacing them ensures that your machine operates efficiently and effectively.

Electrolux parts, particularly belts, are designed to handle daily wear and tear, ensuring the longevity of your appliance. Installing high-quality Electrolux belt replacement parts guarantees that your machine runs as intended, reducing downtime and extending its life. These belts are specifically crafted by the Original Equipment Manufacturer (OEM), ensuring a perfect fit and reliable performance. OEM belts are built to last, providing the same quality and durability as the original components.

When it comes to maintaining or restoring the functionality of your appliance, having access to the right Electrolux parts is essential. So, if your washer or dryer isn't performing up to par, consider checking the belt—it might just be the simple fix needed. Rest easy knowing that high-quality replacement parts are available to keep your appliance in top shape and running smoothly for years to come.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store