Electrolux Handle

The Door Handle is an OEM part for Frigidaire refrigerators. This part allows for easy opening and closing of the door, ensuring convenient access to your frozen foods. 

Over time, door handles can become loose, cracked, or completely break off due to frequent use, accidental impacts, or material fatigue. This can make opening the freezer more difficult and may even lead to further damage to the door or the sealing mechanism if users apply excessive force when trying to open or close the door.

Symptoms of a bad Door Handle include:

• The handle is loose or wobbly
• Visible cracks or breaks in the handle
• Difficulty in opening the door due to a damaged or missing handle 

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Door Handle is an OEM part for Frigidaire ovens. It is designed to provide a secure grip for opening and closing the oven door. This handle is white in color and 29" in length. Please note, the mounting screws are not included with the handle.

You should replace the door handle if it becomes loose, damaged, or broken. Causes of a bad door handle can include regular wear and tear from frequent use, exposure to high temperatures, or accidental impacts that cause cracks or breaks. Over time, these issues can make the handle less effective or unsafe to use.

Symptoms of a bad door handle include:

• The handle feeling loose or wobbly
• Cracks or visible damage on the handle
• Difficulty in gripping or securely holding the handle
• The handle completely detaching from the door

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Handle is an OEM replacement part for Frigidaire ranges. It is the component located on the front of the oven that allows for opening and closing the oven door.

Causes of a bad handle stem primarily from wear and tear due to frequent use over many years. Exposure to heat cycling may also degrade adhesives or secondary components that secure the handle.

Symptoms of a faulty handle include:

• Difficulty opening or closing the oven door
• The handle detaching from the door
• Sharp edges or broken pieces that compromise safety
• Loss of grip or stability while moving the door

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

This door handle provides the grip to open and close the appliance door. Replace a cracked, loose, or missing handle to restore easy access and a clean, finished look.

• Provides the user handhold to operate the door
• Mounts to the door panel and transfers pull force to the latch mechanism
• Common symptoms: handle cracked/broken, loose or falling off, difficulty opening the door
• Helps address cosmetic damage or sharp edges from a broken handle

• Disconnect power to the appliance before servicing
• Open the door and support the outer panel or glass, if applicable
• Transfer and reuse original fasteners; align the new handle and tighten evenly—do not overtighten
• Verify smooth door operation before returning to service

The Detergent Dispenser Handle Assembly is an OEM component for Frigidaire front-loading washing machines. As the user access point to the detergent drawer, this assembly incorporates the pull tab handle and internal latching mechanisms. 

Causes of failure could include broken or cracked plastic components from repeated opening and closing of the drawer over time, as well as worn gears and rollers failing to securely close and latch the drawer. Mineral buildup may also cause jams or obstructed motion.

Symptoms consist of:

• Loose, detached, or missing pull tab handle  
• Inability to fully open or properly close the detergent drawer
• Premature detergent leaks or spills from around the drawer
• Soap residue or unused detergent remaining in the drawer  

This OEM Frigidaire replacement is compatible with select Frigidaire, Electrolux, Gibson, Kelvinator, and some Kenmore brand models.

This handle trim replaces a damaged or missing trim piece on the appliance's door handle. It restores a clean, finished look by covering mounting hardware and helps keep the handle properly aligned for everyday use.

• Finishes the end of the door handle and hides visible screws
• Helps stabilize the handle and maintain proper alignment
• Restores appearance when the original trim is cracked, loose, or missing
• Common signs: broken or missing cap, exposed screws, wobbly handle

• Disconnect power before servicing
• Open the door to access the handle; remove the old trim by releasing its clips or fasteners
• Align and snap the new trim into place; transfer any hardware if required
• Do not overtighten fasteners to avoid damaging plastic parts

The Spacer is an OEM part for Frigidaire ranges and ovens. This part provides the necessary clearance between the oven door handle and the door itself, preventing friction and wear while ensuring the handle is securely attached and easy to use. This small but crucial component aids in the proper functioning of the oven door, making it easier and safer to open and close without exerting extra force.

Causes of a bad Spacer include mechanical stress leading to cracks or breaks, improper installation that may result in loosening over time, and degradation from heat exposure and frequent use.

Symptoms of a failing Spacer include:

• Loose oven door handle.
• Difficulty in opening or closing the oven door.
• Visible gaps or misalignment of the door handle.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This white door handle replaces a cracked, loose, or missing handle. It restores a secure grip so the door opens and closes properly and refreshes the unit's appearance with a clean, factory-color finish.

• Provides the handhold used to open and close the door
• Common fix for a broken, cracked, or missing handle
• Helps when the handle feels loose, flexes, or falls off
• Restores the door's look with a matching white finish

• Disconnect power before servicing.
• Support the door while removing/installing the handle to prevent stress on hinges or glass.
• Remove the original mounting screws, align the new handle, and reinstall using existing hardware.
• Do not overtighten screws to avoid cracking the handle or door panel.

This is the factory handle set for select Frigidaire-built appliances. It restores a secure, comfortable grip and fresh appearance so doors or drawers open and close as intended. What it does

• Provides the handhold needed to open and close the appliance door or drawer
• Replaces cracked, broken, or missing handles
• Helps correct loose or wobbly handles that won't stay tight
• Refreshes worn or scuffed handles for a cleaner look

• Manufacturer-supplied handle set

• Disconnect power before servicing; allow hot surfaces to cool
• Remove interior/hidden mounting screws and the old handle
• Align and secure the new handle; re-use existing hardware/brackets if applicable
• Do not overtighten fasteners; verify smooth door/drawer operation

This end cap finishes and secures the exposed end of a handle, rail, or trim piece on your appliance. It restores a clean look and helps keep the attached component stable during everyday use.

• Covers the open end of a handle/rail and conceals fasteners for a finished appearance
• Helps hold the mating piece in place to reduce looseness, rattling, or wobble
• Replace if the existing cap is cracked, missing, warped, or will not stay attached
• Can help address issues like a loose handle/rail, exposed screws, or sharp/unfinished edges

• Disconnect power to the appliance before servicing; shut off gas/water if applicable
• Note the cap's orientation and any side-specific features before removal
• Release retaining tabs or remove the set screw (as applicable), then align and press/fasten the new cap into place
• Do not overtighten fasteners; verify secure fit and smooth operation after installation

This replacement end cap finishes and secures the open end of a compatible handle, rail, or trim piece on your appliance. Replacing a cracked or missing cap restores a clean look and helps keep the attached part properly aligned. What it does:

• Covers and protects the exposed end of the mating bar/handle/trim
• Helps keep the connected component seated and prevents shifting
• Replaces broken or missing caps that won't stay attached
• Common signs: loose or wobbly trim/rail, rattling, visible broken tabs, or an uncovered edge

• 1 end cap

• Disconnect power to the appliance before servicing
• Compare the new cap to the original to match orientation
• Transfer and reuse any original screws or clips if your model uses them
• Align tabs and press or slide the cap into place without forcing; verify a secure fit

The Handle is an OEM part for Frigidaire ranges. Crafted from durable heat-resistant metal, these handles provide safe, ergonomic access to oven interiors during cooking cycles.  

Prolonged exposure to elevated oven temperatures causes typical discoloration of painted finishes as well as looseness from load stresses reducing tactile control over years. Cooking convenience decreases without gripable surfaces.

Symptoms indicating handle wear include:

• Faded, chipped, or flaking handle finishes  
• Loose, rattling, or awkward movement from placement
• Deteriorating mounting attachments risking accidental falls

Replacing with this OEM Frigidaire handle restores tactile guidance into the cooking cavity. Compatibility also fits some Kenmore, Electrolux, and Gibson ranges renewing secure doorknob function through authorized maintenance. 

This replacement door handle restores a sturdy, comfortable grip on your refrigerator door. It replaces cracked or loose handles so you can open and close the door safely while keeping the appliance's appearance clean and finished.

• Provides the leverage and grip needed to open and close the door
• Restores appearance when the original handle is worn, discolored, or broken
• Helps prevent stress on the door gasket by giving a proper grab point
• Common signs of failure: handle is cracked, loose, wobbly, or missing

• Disconnect power before servicing; turn off water supply if working near a dispenser line
• Open the door and remove any decorative end caps to access the mounting screws
• Support the handle, remove screws, position the new handle, and reinstall using existing hardware; do not overtighten
• The handle is secure and the door opens and closes smoothly

This replacement door handle restores a secure grip for opening and closing the appliance door and improves usability and appearance. It fits the OEM mount points and matches the original design for a direct replacement. What it does:

• Provides a solid, ergonomic grip to open and close the appliance door
• Replaces cracked, broken, or loose handles that won't stay secure
• Helps restore proper door operation and user access
• Matches the original mounting locations for a straightforward swap

• Disconnect power to the appliance before starting any work
• Use basic hand tools to remove the old handle screws or fasteners and install the new handle
• Keep removed screws and small parts in a safe place for re-use

This door handle assembly provides a ready-to-install replacement to restore a secure, easy-grip opening for your refrigerator door. Durable construction replaces a worn or broken handle for reliable daily use. What it does:

• Replaces a cracked, loose, or broken refrigerator door handle to restore safe operation and appearance
• Provides a solid grip for opening and closing the door smoothly
• Matches factory mounting points for proper fit and alignment
• Helps prevent door damage and keeps the seal functioning by ensuring correct door movement

• Disconnect power to the appliance before beginning any repair to avoid injury
• Remove any trim or access panels as needed to access mounting screws; retain fasteners for reassembly
• Hand-tighten screws, then snug—do not overtighten to avoid cracking the handle or trim

This replacement refrigerator door handle restores a secure grip and the appliance's finished look so you can open and close the door safely and easily. Designed as a direct-fit replacement when the original is cracked, loose, or missing. What it does:

• Provides a sturdy grip for opening and closing the refrigerator door
• Replaces cracked, damaged, or worn handles that can be uncomfortable or unsafe to use
• Helps prevent further damage to the door surface by restoring proper handling
• Matches the original mounting points for a straightforward swap when compatible

• One refrigerator door handle

• Turn off or unplug the refrigerator or follow the manufacturer's safety guidance before starting
• Use basic hand tools; avoid overtightening fasteners which can crack the handle
• Handle with care to avoid sharp edges or damaged finish during installation