Electrolux Spray Arm & Related

The Upper Rack Assembly is an OEM part for Frigidaire dishwashers. It is designed to hold dishes, glasses, and other items in the upper section of the dishwasher, allowing for efficient and organized cleaning.

Causes of a bad Upper Rack Assembly can include wear and tear over time, damage from heavy or improperly placed items, or issues with the rollers and tracks that allow the rack to slide in and out smoothly.

Symptoms of a bad Upper Rack Assembly include:

• Difficulty sliding the rack in or out
• The rack falling off its tracks
• Rust or corrosion on the rack
• Broken or missing tines that hold dishes in place

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Lower Spray Arm is an OEM component specifically designed for Bosch dishwashers. It spreads cleaning water and detergent beneath dishes on lower racks and shelves. 

Uniform coverage is provided through the spinning spray of multiple strategically placed nozzles. Dedicated lower basket washing power tackles tough soils.

Causes of spray arm malfunction can include clogs from food debris accumulations over time. Impeller damage from hard impacts inside the wash chamber is also possible.

Symptoms of a defective lower spray arm include: 

• Poor or ineffective cleaning on lower racks and surfaces
• Dried-on food remaining in hard-to-reach crevices below  
• Noticeable decreases in water pressure impacting lower wash

This OEM Bosch replacement part is also compatible with Thermador, Gaggenau, and some Kenmore models sharing uniform wash architectures. Replacement ensures balanced upper and lower cleaning performance.
 

The Wash Arm Bearing is an OEM replacement part for Frigidaire dishwashers. It is a crucial component that supports and facilitates the smooth rotation of the wash arm during the dishwashing cycle. The wash arm is responsible for spraying water and distributing detergent solution evenly throughout the dishwasher tub, ensuring thorough cleaning of dishes.

Causes of a bad wash arm bearing include wear and tear over time, exposure to debris or hard water buildup, or physical damage due to impact or mishandling. A faulty bearing can lead to issues with the wash arm's rotation and water distribution.

Symptoms of a bad wash arm bearing include:

• Excessive noise or grinding sounds during the wash cycle
• The wash arm not rotating or spinning properly
• Uneven or incomplete cleaning of dishes
• Water not being distributed evenly within the dishwasher tub

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.

This lower dishwasher spray arm circulates water across the lower rack to help wash and rinse dishes effectively. Replaces a worn or damaged arm to restore proper spray coverage and improve cleaning performance. What it does:

• Rotates and distributes pressurized water to reach dishes on the lower rack
• Helps remove food soil and rinse detergent from dishes and cookware
• Commonly replaced when you notice poor cleaning, uneven spray, or a cracked/broken arm
• Also replaced if the arm no longer spins freely or leaks at the hub

• Disconnect power to the dishwasher and shut off water supply before starting
• Remove lower rack and any obstructions; follow OEM removal steps to detach the old arm
• Ensure the arm hub and spray ports are free of debris before installing the new arm
• Reinstall rack, restore power/water, and run a short cycle to confirm proper rotation and no leaks

This lower spray arm distributes pressurized water across the dishwasher's lower rack to help remove food and residue for cleaner dishes. It mounts on the hub beneath the lower rack and spins during the wash cycle. What it does:

• Directs rotating spray patterns to reach plates, pots and pans on the lower rack
• Helps clear stuck-on food and improve overall wash performance when functioning properly
• Can fail or clog from mineral deposits or trapped debris, causing reduced spray or poor cleaning
• Replacing a worn or cracked spray arm restores proper water flow and spray coverage

• Disconnect power and water to the dishwasher before starting any service
• Inspect the hub and fastener for damage; remove debris from spray holes and seals before installing
• Hand-thread or snap the arm into place per factory alignment; do not force or overtighten
• Run a short rinse cycle to check for proper rotation and leaks after installation