Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Electrolux Washer Support Parts

Best Seller
Electrolux Shock Absorber Kit
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304485917

The Shock Absorber Kit is an OEM part for Frigidaire washing machines. It is a comprehensive kit that includes 2 shock absorbers, 1 locking pin, 4 lock nuts, and a set of instructions. These shock absorbers play a vital role in reducing vibrations and absorbing shocks during the washing cycle, providing stability and minimizing excessive movement.

Causes of a bad shock absorber can include wear and tear over time, exposure to heavy loads or unbalanced loads that put excessive strain on the absorbers, or damage due to impact or mishandling.

Symptoms of a bad Shock Absorber include:

  • Excessive shaking or vibrating during the wash cycle
  • Loud banging noises
  • The washer moving or walking during the operation
  • Leaks due to increased stress on the tub and other components

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This part fixes the following symptoms
  • Shakes and moves
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Very noisy then ultimately bearing failure and a broken shock mount   Brian B. • Canton , NY • September 23, 2014

I watched the video posted by Jerrod Sessler on yellow van handyman.com. Then I had to unstack the dryer from the washer, remove all covers, disconnect all hose connections, shock mounts and springs and remove the tub assembly. Then I disassembled the tub assembly and remove seal and both bearings from the rear half. At this point I cleaned everything. I installed new bearings and seal, installed the basket and assembled both tub halves using a new gasket and silicone, and reinstalled the... Read more

More
$46.95
Compare At:
$55.87
You Save:
$8.92

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electrolux Rear Shock Absorber Kit
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304491700

This rear shock absorber kit stabilizes the washer tub by damping movement and vibration. Replacing a worn shock restores smoother, quieter spins and helps prevent the drum from banging the cabinet or the machine from walking. What it does:

  • Dampens tub movement to control vibration during wash and spin
  • Helps prevent banging/thumping noises and cabinet contact
  • Reduces "walking" or excessive shaking of the washer
  • Can help minimize out-of-balance interruptions
What's included:
  • One rear shock absorber kit
Install notes:
  • Disconnect power and turn off water before servicing
  • Support the tub/drum to relieve load before removing the shock
  • Remove retaining pins/bolts; install the new shock in the same orientation and transfer any reusable hardware
  • For consistent damping, replacing shocks in pairs or as a complete set is commonly recommended

Do-It-Yourself Stories from Customers like You E21 water not pumping out fast enough (eiflw55hmb washer)   Helmut D. • Rancho Palos Verdes , CA • April 20, 2020

Replaced pump. All components are accessible from the front of the machine. You have to remove two screws in the back that hold on the top cover, then slide the cover back. This will allow access to the screws that hold on the control panel. Remove the control panel (unplug cable), then remove the spring/wire that holds on the door bellows to the front panel (removing and installing that is the most difficult part of the job) and carefully remove the bellows from the front panel. Then remove... Read more

More
$65.95
Compare At:
$79.14
You Save:
$13.19

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electrolux Shock Absorber Kit (Front)
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304491701

This front shock absorber kit stabilizes the washer's tub during spin to reduce vibration and noise. Replacing worn dampers helps restore smooth operation and protects the cabinet and suspension from excessive movement.

  • Dampens and controls tub movement during wash and spin
  • Helps reduce shaking, "walking," and loud thumping/banging noises
  • Can help when the washer won't reach or maintain full spin due to imbalance
  • Replaces weakened or damaged front shock mounts/dampers
What's included: Front shock absorber kit. Install notes:
  • Disconnect power and water before servicing
  • Access shocks per your model's procedure; support the tub to relieve load
  • Install with mounts aligned and fasteners tightened securely; verify free tub movement
  • Many replace shocks in pairs to maintain balanced damping

Do-It-Yourself Stories from Customers like You Washer turned into a bucking bronco.   Anthony M. • Peyton , CO • May 23, 2020

I tore it apart using. YouTube videos to guide me and found the shocks were loose and floppy. I found the shocks in stock here and had them in my hand 2 days later for only $10 shipping! It runs great now! Read more

More
$149.95
Compare At:
$178.44
You Save:
$28.49

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electrolux Shock Absorber
Genuine Frigidaire part
By: Frigidaire
Part Number: 137412601

Note: This is one shock absorber, order quantity needed.

The Shock Absorber is an OEM part for Frigidaire washing machines. The shock absorbers play a vital role in reducing vibrations during the spin cycle and absorbing mechanical shocks that occur with imbalanced or off-center loads. Their durable design effectively isolates the external structure from damaging reverberations.

Causes may involve age-related wear that diminishes shock absorbing qualities over thousands of machine cycles. Impact damage or broken mounts could also necessitate replacement. Installing this kit restores a quiet and stable washing performance to the appliance.

Symptoms of a bad shock absorber include:

  • Excessive shaking or vibrating during operation, especially spin cycles
  • Loud banging or knocking noises from the washer
  • The washer moving or walking on the floor during use
  • Leaks from external tub connections

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You My drive belt broke and left rear shock absorber broke.   Mark A. • Granbury , TX • July 11, 2022

Checked out a YouTube video on how to fix the two issues I had. Ordered the parts from AppliancePartsPros.com with overnight shipping and had the parts replaced in less than 30 minutes from start to finish the next day. Read more

More
$55.24
Compare At:
$65.74
You Save:
$10.50

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electrolux Shock Absorber
Genuine Frigidaire part
By: Frigidaire
Part Number: 137412701

The Shock Absorber is an OEM part for Whirlpool brand washing machines. It plays a vital role in reducing vibrations and absorbing shocks during the wash cycle, providing stability and minimizing excessive movement. 

Symptoms of a bad shock absorber include:

  • Excessive shaking or vibrating during the wash cycle 
  • Loud banging noises
  • The washer moving or walking during the operation
  • Leaks due to increased stress on the tub and other components

Causes of a bad shock absorber can include wear and tear over time, exposure to heavy loads or unbalanced loads that put excessive strain on the absorbers, or damage due to impact or mishandling. 

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Do-It-Yourself Stories from Customers like You The washing machine had its shock absorbers damaged.   Alex G. • Greenville , SC • March 11, 2022

I replaced all shock absorbers with new ones. Read more

More
$59.95
Compare At:
$71.94
You Save:
$11.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Electrolux Trunnion Plate (Washer)
Genuine Frigidaire part
By: Frigidaire
Part Number: 137107000

This trunnion plate secures the washer's inner basket to the drive hub/trunnion, keeping the tub centered and stable during spin. Replace it if the basket feels loose, wobbles, or makes scraping/knocking noises from the hub area. What it does:

  • Couples the inner basket to the trunnion/drive hub so the basket spins true
  • Helps maintain alignment to reduce vibration and tub-to-basket contact
  • Wear can allow play or slippage at the hub connection
  • Common symptoms: wobble, scraping/grinding, excessive vibration, poor spin results
What's included:
  • One trunnion plate
Install notes:
  • Disconnect power and wear cut-resistant gloves before servicing
  • Access typically requires removing the agitator/wash plate and lifting out the inner basket
  • Clean and inspect mating surfaces; align the plate correctly and tighten fasteners evenly
  • Check related parts for wear and replace if needed

Do-It-Yourself Stories from Customers like You Leaking washer tub   Hugh S. • Miami , FL • June 25, 2016

The seal at the bottom of the tub had started to fail. On large loads water would leak so I ordered a new one rubber seal. Getting the trunnion off the transmission shaft was hard as it was calcified and corroded. I used a wire brush to get some of it off and then used a lot of WD-40. The bolt holding the trunnion plate on sheared off when I tried to remove it on one side and the other came out ok (the bolt hole through the trunnion is not threaded so it should slide out once the plate is off... Read more

More
$20.33
Compare At:
$24.40
You Save:
$4.07

IN STOCK
Ships Today Guaranteed
Add to Cart
Electrolux Trunnion
Genuine Frigidaire part
By: Frigidaire
Part Number: 137489100

The Trunnion is an OEM part for Frigidaire washing machines. It allows the outer wash tub to rotate during agitation and the spin cycles. The trunnion is a heavy-duty, durable component designed to withstand the rigors of repeated cycles and turbulent wash motions.

Causes of a bad trunnion can be wear over extended use, damage from unbalanced loads that strain the pivot point, or fractures from impact or manual mishandling.

Symptoms of a bad trunnion include:

  • Excessive vibration or shaking during operation
  • Noisy or grinding sounds emanating from the tub area
  • Difficulty starting or stopping tub motions
  • The tub failing to rotate properly during cycles

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

More
$102.95
Compare At:
$122.51
You Save:
$19.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Electrolux Plate
Genuine Frigidaire part
By: Frigidaire
Part Number: 134430600

 

More
$10.04
Compare At:
$11.84
You Save:
$1.80

IN STOCK
Ships Today Guaranteed
Add to Cart
Electrolux Support
Genuine Frigidaire part
By: Frigidaire
Part Number: 134642300

 

Do-It-Yourself Stories from Customers like You 59   Rony H. • Los Angeles , CA • May 02, 2015

Well even thou the error code was 59 in the initial diagnosis, the problem was not actually the motor or the gaskets somehow a piece o laundry was flushed in between the washing drum an it`s casing, so basically this piece of cloth got stuck where heating element is install and there`s a little clip(the part that I order) that is just holding the element, now this clip just broke and with the piece o cloth stuck in there the machine started making this loud noise, we thought it was the end of... Read more

More
$14.95
Compare At:
$17.64
You Save:
$2.69

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Electrolux Bracket
Genuine Frigidaire part
By: Frigidaire
Part Number: 134713100

 

More
$52.28
Compare At:
$62.21
You Save:
$9.93

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Electrolux Support
Genuine Frigidaire part
By: Frigidaire
Part Number: 134644600

 

More
$7.95
Compare At:
$8.73
You Save:
$0.78

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Electrolux Trunnion (Washer Inner Tub Hub)
Genuine Frigidaire part
By: Frigidaire
Part Number: 131545101

The trunnion is the hub that mounts the washer's inner tub to the drive shaft. Replacing a worn hub restores a solid, centered connection so the basket spins smoothly without wobble, slip, or grinding. What it does:

  • Secures and centers the spin basket on the drive shaft for balanced rotation
  • Transfers drive torque to the inner tub during spin
  • Helps maintain basket alignment to reduce vibration
  • Typical symptoms of failure: loose/wobbly tub, scraping or grinding noises, poor or no spin, frequent out-of-balance events
What's included:
  • 1 trunnion
Install notes:
  • Disconnect power and water before service; wear gloves and eye protection
  • Access the hub by removing top/access parts, then the agitator/wash plate and inner-tub fasteners
  • Clean the shaft and mating surfaces; seat the new trunnion fully and tighten fasteners evenly in a crisscross pattern
  • Inspect related parts (tub seal, bolts, bearing) while open and replace if worn; run a short test cycle to ensure smooth spin

Do-It-Yourself Stories from Customers like You Leaking washer tub   Hugh S. • Miami , FL • June 25, 2016

The seal at the bottom of the tub had started to fail. On large loads water would leak so I ordered a new one rubber seal. Getting the trunnion off the transmission shaft was hard as it was calcified and corroded. I used a wire brush to get some of it off and then used a lot of WD-40. The bolt holding the trunnion plate on sheared off when I tried to remove it on one side and the other came out ok (the bolt hole through the trunnion is not threaded so it should slide out once the plate is off... Read more

More

Electrolux washer support parts are vital for keeping your washer in top shape. After all, a well-maintained washing machine ensures that your clothes are consistently clean and fresh. By using high-quality Electrolux washer support parts, you're ensuring the longevity and efficiency of your appliance, preventing unexpected breakdowns and costly repairs.

Electrolux washer support parts are specifically designed to match the precise specifications of your washer. These OEM replacement parts offer superior quality and compatibility, meaning they fit and function perfectly within the machine. Whether it's a new pump to keep water flowing smoothly, a door seal to prevent leaks, or a motor to maintain the drum's spin, each part plays a crucial role in the overall operation of your washer.

Choosing Electrolux washer support parts means committing to the reliability and performance of your washing machine. You can always count on the availability and quality of these parts, ensuring your washer remains a dependable workhorse in your home. So, rest easy knowing that with the right parts, your Electrolux washer will continue to serve you efficiently for years to come.

More

Related Parts

Electrolux Washer Adhesive Parts Electrolux Washer Agitator Electrolux Washer Air Chamber Or Dome Parts Electrolux Washer Baffle Parts Electrolux Washer Bearing Electrolux Washer Belt Electrolux Washer Bracket & Flange Parts Electrolux Washer Bumper, Bushing, Grommet Parts Electrolux Washer Cable Or Retainer Parts Electrolux Washer Cap Or Cover Parts Electrolux Washer Chassis Or Cabinet Parts Electrolux Washer Clip Or Clamp Electrolux Washer Control Board Electrolux Washer Dispenser Electrolux Washer Door, Door Glass & Parts Parts Electrolux Washer Endcap Parts Electrolux Washer Filter Parts Electrolux Washer Gasket & Seal Parts Electrolux Washer Gearcase Parts Electrolux Washer Guide Parts Electrolux Washer Handle Electrolux Washer Heating Element Parts Electrolux Washer Hose Or Tube Electrolux Washer Hub Parts Electrolux Washer Insulation, Sound Dampening Electrolux Washer Knob, Dial & Button Electrolux Washer Latch, Catch, Lock Electrolux Washer Leg Or Foot Parts Electrolux Washer Lens & Related Parts Electrolux Washer Light, Bulb, Lamp Parts Electrolux Washer Lubricant Parts Electrolux Washer Manual, Care Guide Parts Electrolux Washer Motor Electrolux Washer Nameplate, Faceplate Parts Electrolux Washer Paint Parts Electrolux Washer Panel Parts Electrolux Washer Plug Or Insert Parts Electrolux Washer Power Nut Or Trunnion Parts Electrolux Washer Pump Electrolux Washer Screws, Nuts, Washers Electrolux Washer Shaft Or Pin Parts Electrolux Washer Shipping Bolt Parts Electrolux Washer Siphon & Vacuum Break Parts Electrolux Washer Spring Electrolux Washer Switch Electrolux Washer Tool Parts Electrolux Washer Touch Pad Parts Electrolux Washer Tub Or Basket Parts Electrolux Washer Tub Ring Or Cover, Counterweight Parts Electrolux Washer Valve Electrolux Washer Wire, Harness, Power Cord Parts
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store