Engine Parts

This part is an ignition coil assembly. This is a genuine OEM part and has been sourced directly from the manufacturer. This part is intended to replace a deteriorated, detached, or broken ignition coil on certain outdoor power equipment models. Ignition coils are essential for transforming battery voltage into an electrical spark to ignite fuel and start the engine. Over time and with regular usage, ignition coils can easily become worn out and affect the performance of outdoor power equipment. Signs of a failing ignition coil include engine misfires, inability to start equipment, and rough idling. Please be aware that proper tools are needed to replace this part and correct safety measures should always be followed when working on any type of equipment. For the most accurate information on installing this replacement ignition coil, specific manufacturer diagrams should always be referenced.As an authentic replacement part, this ignition coil assembly can be used on multiple different models of Craftsman, Cub Cadet, Troy-Bilt, MTD, and Husky snow blowers. Please note that this ignition coil assembly is a genuine part made of high-quality materials and is sold individually.

This replacement part is a flywheel. This is a genuine replacement part made by MTD. This part is a large rotating piece, similar to a wheel, that provides the engine with rotational energy that is later converted to other types of energy so that the engine can operate smoothly. A new flywheel might be needed if the current one is missing or damaged. If the user hears unusual noises coming from inside the engine area, the flywheel might be out of place and not working properly. If this is the case, it might be best to replace this part. Be sure the engine is completely powered down and cooled off before repairing this part. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This is a fuel cap assembly that is for use in a wide range of lawn and garden equipment. The fuel cap plays a simple but important role in these machines. It is used to cover the refill nzle of the fuel tank. It ensures that there is no risk of debris getting into the tank and that the gas does not evaporate. If there is damage to the cap, or if it is missing, the owners will want to replace it right away.The fuel cap is made from durable plastic, and it should last a long time. However, it could become damaged due to use, an accident, or simply because of wear and tear. There is also the risk that it could become lost. Replacing the fuel cap is fast and simple, and no tools are required. Owners can remove the old part and screw the new one onto the machine.This fuel cap is compatible with select models of tillers, shredders, and mowers from MTD, Troy-Bilt, Yard-Man, Cub Cadet, and Yard Machines. It is sold individually and is a genuine OEM replacement part.

This replacement part is a gasket kit, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. A gasket kit includes many different small parts that all work together to help the engine run smoothly. A gasket kit is typically held together using screw and bolts and is situated very close to the engine. A new gasket might be needed if the current one is visibly damaged or broken. It is not unusual for the gasket to become worn down after years or normal use. Be sure the entire engine is shut down and cooled off before replacing this part. It is also recommended that work gloves are used as some of the parts may be sharp.This is an OEM replacement part and is sold individually. This part is sourced directly from the manufacturer, and it is intended for use in different lawn mowers.

This carburetor gasket is located between the insulator and the carburetor, creating a strong seal between the two to allow for optimal compression and engine performance. Over time and due to constant heat exposure, gaskets can degrade or become damaged. This can result in leaks in the system, which will impact performance and could cause the engine to fail completely if not properly addressed. If the carburetor gasket becomes faulty in any capacity, it needs to be replaced as soon as possible. This genuine OEM gasket replacement is manufactured to exact standards and is compatible with several models of snowblower engines from Troy-Bilt, MTD, Yard Man, Yard Machines, Cub Cadet, and Husky. This gasket is made of durable material, but gaskets could be more prone to damage or breakage during other repairs, so always use caution when working with this part. Allow the engine to cool completely and wear gloves when performing any engine repairs for hand protection.

This crankcase gasket is a genuine MTD part, sold individually. This crankcase gasket can be used as a replacement part in lawnmowers, tillers, string trimmers, leaf blowers, edgers, log splitters, and wood chippers. The purpose of the crankcase gasket for one of these outdoor appliances is to seal off and protect the area surrounding the crankcase gasket from leakages and the accumulation of external materials within the infrastructure of the crankcase.The crankcase gasket might have to be replaced if the seal is broken due to damage or stripping away of the gasket. This could occur as a result of general wear and tear from long-term use or due to collision with a hard object that warps the gasket beyond functionality. If this occurs, the crankcase gasket should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This crankcase gasket is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, Yard-Man, Huskee, and MasterCut.

A carburetor gasket works by providing a secure seal, preventing leaking between the carburetor and the insulator plate. Over time, gaskets can become worn down, cracked, or torn. This affects the efficiency or your equipment’s engine. If your carburetor has a leak due to a damaged carburetor gasket, the engine may run roughly or not start at all. This repair should be easy and take only a short time. Remove the damaged carburetor gasket and replace it with a new genuine OEM part. A set of screwdrivers is needed to make this repair possible. The carburetor gasket will work with small engines like log splitters, snowblowers, and tillers. Some of the many brands that are compatible with this carburetor gasket are Craftsman, Cub Cadet, MTD, Troy-Bilt, Yard Machines, and Yard-Man. Sold individually.

This replacement part is an oil seal. This is a genuine replacement part made by MTD. This part is used to ensure that oil and other fuel cannot escape from the tank. The seal prevents it from leaking during use to ensure the engine is able to run properly. A new oil seal might be needed if the current one has been damaged. If the seal is worn down and thinner than before, it can cause leaks and oil waste. If this is the case, the seal should be replaced immediately. Oil leakage can cause other issues within the machine. Refer to the owner's manual for more information on how to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This part is a replacement control panel This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective control panel in a variety of snow blower and snow thrower models. The control panel enables the user to properly control the snow blower or snow thrower. This control panel will require replacement with a genuine OEM part if faulty in any way. When working on or near any mechanical equipment, it is important that it is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this control panel, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this control panel is suitable for use on several different models of snow blowers and snow throwers manufactured by MTD, Craftsman, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This piston pin snap ring is a genuine MTD part, sold individually. This piston pin snap ring can be used as a replacement part in a lawn mower or a snowblower. This part stabilizes the pistons within the equipment's engine.The piston pin snap ring might be subject to damage within the standard lifespan of a lawn mower or a snowblower. This could occur in the form of puncturing, tearing, ripping, denting, cracking, or eroding, and if the damage is severe enough to preclude the piston pin snap ring from keeping its fastened components in place, the piston pin snap ring should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This piston pin snap ring is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, and Yard Man.

This replacement part is an intake valve seal. It is a genuine replacement part made by MTD. This intake valve seal is able to close the valve in the machine or appliance so that air of fuel cannot escape during use. This part is essential to the overall operation of the machine. A new intake valve seal might be needed if the current one is allowing for air or fuel to escape during use. This can cause additional problems within the machine in general. Be sure the engine is completely powered off and cooled down before attempting to replace this part. Reference the appropriate user manual for more information. This is a genuine OEM replacement part. This intake valve seal is sold individually and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

This is a piston ring set that is compatible with a range of lawn and garden equipment. Piston rings create a seal between the cylinder wall and the piston, so the pressurized combustion gases do not leak. If the piston rings are going bad or have failed, owners may notice that the machine is using more oil. They may also see white or gray smoke coming from the machine's exhaust. The performance of the equipment will also decline.Piston rings can fail for many different reasons. They might not have enough lubrication, which could cause them to overheat and lose their tension. The piston rings could also fail if they are installed incorrectly. Machines with problematic piston rings will have trouble operating properly and will need to be replaced.This piston ring set can work with select chippers, lawn tractors, log splitters, snowblowers, mowers, and other engines from Yard-Man, Yard Machines, MTD, Troy-Bilt, Cub Cadet, and Husky. The set is sold individually, and the genuine OEM parts have been sourced from the manufacturer.