Frigidaire Dishrack

The Upper Dishrack Assembly is an OEM component specifically designed for Frigidaire dishwashers. It plays a crucial role in supporting dishes during the washing process and allowing for efficient circulation of water underneath to thoroughly clean all surfaces. 

Causes of a bad dishrack can include warping or bending of the wires over time due to heavy loads, or damage from impact or mishandling that causes bent wires or broken support beams. 

Symptoms of a bad upper dishrack include:

• Dishes not drying completely
• Dishes shifting or sliding during the wash cycle 
• Standing water or poor water circulation underneath the rack
• Rust or corrosion building up on dish surfaces

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

The Dishwasher Rack Assembly is an OEM part for Frigidaire dishwashers. It provides an adjustable racking system inside the dishwasher tub to accommodate varying sizes of dishes, utensils, and cookware on multiple shelf levels. The rack assembly measures about 22"x 21"x 9" including the wheels.

Symptoms of a bad rack assembly include:

• Broken or missing rack wires that compromise integrity
• Shelves that will not stay locked into desired positions
• Rust or corrosion buildup weakening structural components
• An inability to fully extend or retract racks from the tub

Causes of a bad rack can include deterioration of rack materials from repeated wash cycles, broken mounting connectors, or damage from improper loading methods that put undue stress on the racks.

As an OEM replacement, this Frigidaire dishwasher rack restores safe and dependable use of the cleaning space. This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Lower Rack Assembly is an OEM part for Frigidaire dishwashers. This rack is designed to hold dishes, cups, glasses and other utensils securely in place on the lower level during the washing cycle.

Causes of a bad lower rack can include warping or bending of wire prongs over time due to heavy loads, corrosion from constant moisture exposure, breakage of plastic parts, or shearing off of roller components. Heavy pots and pans can put significant strain on the rack.

Symptoms of a bad lower rack assembly include:

• Items falling through or between prongs during the cycle
• Rack unable to securely hold dishes in place
• Rack unable to smoothly roll into and out of the dishwasher
• Loud clanking or banging noises accompanied by excessive movement

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Rack Assembly is an OEM replacement part for Frigidaire dishwashers. It provides a sturdy and organized space for placing dishes, glasses, and utensils during the cleaning cycle. The rack is designed to slide smoothly in and out, ensuring easy loading and unloading of items.

Over time, rack assemblies can become damaged due to wear, exposure to harsh detergents, or repeated impact from heavy or improperly placed items. A malfunctioning rack can affect the dishwasher's capacity and the effectiveness of the cleaning process.

Symptoms of a bad rack assembly include:

• Broken or missing tines, making it difficult to secure dishes
• Difficulty sliding the rack in or out smoothly
• Rust or corrosion on the rack's surface
• Reduced capacity or items not staying in place during cycles

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Replace a damaged or wobbly top rack with this upper rack assembly to restore smooth glide and secure loading on the dishwasher's upper level, helping cups and bowls stay in place and wash correctly.

• Supports and organizes items on the dishwasher's upper level
• Allows the top rack to roll in and out smoothly along the rails
• Helps position items for proper spray coverage and drying
• Common symptoms: rack falls off tracks, binds or won't slide, broken/missing tines, cracked or rusted rack

• Disconnect power before servicing; turn off water if moving the appliance
• Open both upper rails and remove or release the end stops
• Slide the old rack out; transfer any rack-mounted accessories to the new rack if needed
• Insert the new rack into the rails, reinstall end stops, and check for smooth travel

The Rack Assembly is an OEM part for Frigidaire dishwashers. It holds silverware securely in place during the cleaning and drying cycles. This basket measures approximately 16.88" X 8" and has two lids. Please Note: This assembly no longer comes as 3 separate pieces and is now 1 piece.

Causes of a bad basket assembly can include regular wear and tear, damage from overloading or mishandling, and degradation from prolonged exposure to water and detergents. Clips, holders, or the basket frame may break or wear out over time, affecting its functionality.

Symptoms of a failed rack assembly are:

• Silverware shifting positions or falling during cycles
• Difficulty loading or removing dishes
• Rust or flaking of the protective coating
• Noise or rattling from a loose or damaged rack

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Rail End Cap is an OEM part for Frigidaire dishwashers. This small but essential component is designed to fit at the end of the dishwasher rack rails, preventing the racks from sliding off the rails when pulled out for loading or unloading. The end caps also help to protect the dishwasher’s interior walls from scratches or damage that might occur if the metal racks were to come into direct contact with them. 

Symptoms of a failing rail end cap include:

• Dishwasher racks sliding off the rails
• Difficulty pulling racks in and out smoothly
• Noticeable damage or scratches inside the dishwasher

Causes of rail end cap damage typically involve physical stress from frequent use, accidental breakage during loading, or degradation of the material over time.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Upper Rack Assembly is an OEM part for Frigidaire dishwashers. It is designed to hold dishes, glasses, and other items in the upper section of the dishwasher, allowing for efficient and organized cleaning.

Causes of a bad Upper Rack Assembly can include wear and tear over time, damage from heavy or improperly placed items, or issues with the rollers and tracks that allow the rack to slide in and out smoothly.

Symptoms of a bad Upper Rack Assembly include:

• Difficulty sliding the rack in or out
• The rack falling off its tracks
• Rust or corrosion on the rack
• Broken or missing tines that hold dishes in place

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Upper Dishrack Wheel is an OEM part for Frigidaire dishwashers. This part attaches to the upper dishrack, allowing it to slide in and out smoothly along the dishwasher's tracks for easy loading and unloading of dishes.

Common causes of a bad dishrack wheel include wear and tear from frequent use, damage from heavy loads or improper handling, and breakage due to impact.

Symptoms of a bad Upper Dishrack Wheel include:

• Difficulty sliding the upper dishrack in and out
• The upper dishrack derailing or not staying on its tracks
• Unusual noises when moving the dishrack
• Visible damage or wear on the wheel

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This MultiFence is a multi-position rack fence that mounts to the rack to support and organize dishes, lids, and bakeware. It helps keep items upright and in place so cycles run smoothly and cleaning performance stays consistent. What it does:

• Attaches to the rack and flips/locks to secure items of different sizes
• Helps prevent plates, lids, and trays from tipping or sliding during operation
• Replaces a fence that is cracked, warped, missing, or won't stay in position
• Common symptoms include dishes falling over, rattling during cycles, or poor results from shifted loads

• One MultiFence rack fence

• Disconnect power to the appliance; turn off water supply if servicing a dishwasher
• Pull the rack out; release the retaining tabs or clips to remove the old fence
• Align and snap the new fence onto the rack wires; ensure it pivots and locks properly
• Reinstall the rack and verify smooth operation

The Tine Row is an OEM part for Frigidaire dishwashers. It is designed for the left side tine row of your Frigidaire dishwasher. It is designed to hold and support dishes, glasses, and other items securely in the dishwasher rack. The tine row ensures that dishes are properly spaced and positioned for optimal cleaning and drying during the wash cycle.

Over time, tine rows can become damaged or worn out due to repeated use, heavy loads, or mishandling. Bending or breaking of the tines can occur, affecting the overall performance of the dishwasher and potentially causing damage to dishes.

Symptoms of a bad Tine Row include:

• Bent or broken tines
• Difficulty in securely holding dishes
• Rust or corrosion on the tines
• Dishes not being cleaned properly due to improper spacing

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Upper Rack Assembly is an OEM part for Frigidaire dishwashers. This rack provides a secure place for dishes, glasses, and other small items to be cleaned during the wash cycle. 

Causes of a bad upper rack assembly can include regular wear and tear, rust or corrosion from prolonged exposure to water, and damage from heavy or improperly placed items.  

Symptoms of a bad upper rack assembly include:

• Difficulty sliding the rack in and out
• Broken or missing tines
• Visible rust or corrosion
• Dishes not staying securely in place

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Rack Assembly is an OEM component for Frigidaire dishwashers. As the foundation component, the rack assembly provides a sturdy platform to hold dishes in place throughout cleaning cycles. It works seamlessly with adjustable shelf configurations.

Causes of a bad rack assembly can include years of repeated use, loads with broken or sharp dish pieces, or impacts from moving the racks. The reinforced wires may fatigue and distort out of shape.

Symptoms of a bad rack assembly include:

• Dishes falling through or out of rack spaces
• Difficulty loading or removing racks
• Racks sitting unevenly skewing dishes
• Rust or deterioration of wire basket material

This OEM part from Frigidaire is also compatible with some Electrolux, Gibson, and Kenmore models.

The Bracket is an OEM replacement part for Frigidaire dishwashers. This component provides structural support for securing parts within the dishwasher, ensuring proper alignment and stable operation during cycles. Its precise fit is essential for the smooth functioning of your appliance.

Over time, the bracket may wear out or become damaged due to repeated use, corrosion, or accidental impact. A malfunctioning bracket can lead to misaligned components or instability during operation, potentially affecting the dishwasher's performance.

Symptoms of a bad bracket include:

• Loose or misaligned parts within the dishwasher
• Excessive noise or vibrations during operation
• Difficulty in properly installing or adjusting components
• Visible cracks or corrosion on the bracket

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Silverware Basket is an OEM replacement part for Frigidaire dishwashers. It holds and protects silverware during the dishwashing cycle. The basket is designed to fit seamlessly within the dishwasher, providing a convenient and accessible storage solution for silverware.

Causes of a bad silverware basket can include wear and tear over time, damage to the basket or its components due to mishandling or impact or exposure to harsh detergents or chemicals

Symptoms of a bad silverware basket:

• Rust or corrosion
• Difficulty loading or unloading silverware
• Silverware falling out of the basket during the wash cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

The Upper Dishrack Rail is an OEM replacement part for Frigidaire dishwashers. Made of durable steel, the rails withstand years of constant extension, retraction, and weight loads.

Causes of bad rails can include cracks or breaks developing from repeated sliding motions over decades of use. Mineral buildup from hard water may also corrode and weaken internal rail structures.

Symptoms of a bad Upper Dishrack Rail include:

• Rack that will not stay locked securely in position
• Tines that collapse or slip out of adjustment
• Rust accumulating on rail surfaces
• Wheels, bearings or rollers sticking during operation

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore ranges.