Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Frigidaire Relay, Overload, Capacitor

Best Seller
Frigidaire Run Capacitor
Genuine Frigidaire part
By: Frigidaire
Part Number: 297286803

The Run Capacitor is an OEM replacement part for Frigidaire refrigerators. This electrical component plays a crucial role in providing the initial torque needed to start and run the compressor motor, ensuring efficient and reliable operation of your refrigerator's cooling system.

Causes of needing to replace the run capacitor can include normal wear and tear over time, exposure to high temperatures or electrical surges, or physical damage to the capacitor itself.

Symptoms that may indicate a failing run capacitor include:

  • The refrigerator not running or cooling properly
  • The compressor failing to start or running intermittently
  • Humming or buzzing noises coming from the compressor area

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models. 

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You 21 month old Frigidaire upright freezer died.   John P. • Enola , PA • August 02, 2019

Noticed Rolls on the top shelf no longer frozen, though the meat around it still was. Note: This is a good test, keep something that thaws quickly and is not expensive on top shelf, to act as a barometer for your freezer health! I first found a trip online to advance the defrost timer, as a failed timer is a common issue. I advanced the timer, but nothing happened. I emptied the freezer, then removed the thermostat and tested it. No continuity! With the Freezer continuing to thaw, I... Read more

More
$19.95
Compare At:
$23.94
You Save:
$3.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Compressor Run Capacitor
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304464438

The Compressor Run Capacitor is an OEM replacement part for Frigidaire refrigerators. This electrical component is essential for providing the necessary torque to start and maintain the operation of the compressor motor, which is responsible for cooling the refrigerator.

Symptoms of a failing compressor run capacitor include:

  • The refrigerator not running or cooling properly
  • The compressor failing to start or running intermittently
  • Humming or buzzing noises coming from the compressor area

Causes of needing to replace the compressor run capacitor can include normal wear over time, exposure to high temperatures or electrical surges, or physical damage to the capacitor itself.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models. 

This part fixes the following symptoms
  • Won't start
  • Too warm
  • Fridge too warm
  • Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You My Frigidaire frost free commercial freezer was screeching louder than the wheels on my radio flyer red wagon when it was overloaded with 5 cent return for deposit coca cola bottles back in the 1960's   Daniel G. • El Paso , TX • January 24, 2021

In short - I replaced the evaporator fan motor and the evaporator fan blade. The Appliance Parts Pros website was extremely helpful to me. Here's how. 1. The site helped me identify that even though my Freezer says it's a Frigidaire, it's actually an Electrolux. 2. The site identified the potential screech causing parts. (I didn't take a chance, I bought all three) It was a worthwhile investment. My freezer is 20 years old so it deserved some help. 3. The site provided guidance videos (not... Read more

More
$36.95
Compare At:
$44.34
You Save:
$7.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Compressor Start Kit
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304491941

The Compressor Start Kit is an OEM part for Frigidaire refrigerators. It is responsible for providing a reliable start-up for the compressor. It includes the necessary components to assist in initiating the compressor's motor, allowing it to run efficiently.

A bad compressor start kit can occur due to electrical issues, damage, or wear over time. If the start kit fails, it can lead to problems such as the compressor not starting, warm temperatures inside the refrigerator, or inconsistent cooling performance.

Symptoms of a bad compressor start kit include:

  • Compressor not starting or struggling to start.
  • Warm temperatures inside the refrigerator.
  • Inconsistent cooling or inadequate cooling.
  • Unusual noises coming from the compressor.

If you're experiencing any of these issues, it's time to replace the compressor start kit with this genuine part. Restore the proper functioning and cooling performance of your refrigerator with a new compressor start kit. This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Do-It-Yourself Stories from Customers like You Both freezer & fresh food were warming ice cream soft a month or more; finally all ice melted   Sherry N. • Saint Cloud , FL • August 06, 2020

Thanking APP ahead of time for expedient 1 day express parts & videos! I kept a LOG on this repair fix starting 6/21/20: started with cleaning out behind the Frigidaire /coils, fan blade, floor, walls, toe-plate, compressor. #1 Replaced just the Run Capacitor [from my local appl store]. Somewhat better but not a fix. Fridge controls need much higher settings than Factory Settings - which is recommended. Did some homework on several sites /kept coming back to yours / saw what parts are probably... Read more

More
$96.27
Compare At:
$114.56
You Save:
$18.29

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Compressor Start Relay
Genuine Frigidaire part
By: Frigidaire
Part Number: 297237702

The Compressor Start Relay is an OEM part for Frigidaire refrigerators. This essential component is responsible for initiating the compressor's start-up process by supplying power to the compressor motor. It helps kickstart the compressor, allowing it to begin the cooling cycle.

A faulty start relay or overload can occur due to wear and tear over time, electrical issues, or component failure.

Signs of a bad start relay may include:

  • The refrigerator not cooling properly or not cooling at all
  • Unusual noises coming from the compressor area
  • The compressor fails to start or repeatedly cycles on and off

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Refrigerator quit cooling   Mitchell M. • Jackson , GA • May 12, 2017

First I have an LG French Door with a bottom freezer. It quit cooling. I went on line and watched some very informative You Tube videos. I trouble shot according to these videos. In these videos it shows that if there is a click coming off the compressor it has too meanings, the compressor is froze or the start relay is bad. I ohmed the compressor and had no open wires in the compressor. I then shook the relay and it was making noise. The videos stated that is there is a noise in the relay... Read more

More
$75.41
Compare At:
$90.49
You Save:
$15.08

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Starter Device
Genuine Frigidaire part
By: Frigidaire
Part Number: 241707701

The Starter Device is an OEM part for Frigidaire refrigerators. This part boosts the compressor, enabling it to begin and maintain the refrigeration cycle efficiently. A functioning starter device is vital for preserving food at the right temperature, ensuring freshness and preventing spoilage. 

Causes of a bad starter device can range from natural wear and tear to electrical failures, such as short circuits or overloading.

Symptoms of a bad Starter Device include:

  • Refrigerator not starting or frequently restarting
  • A clicking sound coming from the back of the refrigerator, indicating failed start attempts
  • The refrigerator failing to maintain consistent cold temperatures
  • Spoiled food due to inadequate cooling

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You Running but not cooling   Aaron R. • Malakoff , TX • June 12, 2016

Looked up possible causes on line and found video about trouble shooting. It said to check starter cap and run relay on side of compressor. Removed both and found both were bad .ordered replacements on line from appliancePartspros.com. Installed new parts and is working properly. This repair job was on a 2012 Frigidaire refrig. You would think a refrig. Would last longer than 4 years. The original parts and the replacement parts were light weight and cheaply made. I'll probably be doing this... Read more

More
$59.95
Compare At:
$71.34
You Save:
$11.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Compressor Start Device
Genuine Frigidaire part
By: Frigidaire
Part Number: 241941003

The Compressor Start Device is an OEM part for Frigidaire refrigerators. It is crucial for initiating the operation of the refrigerator's compressor, which is responsible for cooling the appliance. This device provides the necessary power boost to start the compressor and ensures it runs efficiently.

You should replace the compressor start device if it becomes faulty. Causes of a bad compressor start device can include electrical failures, wear and tear over time, or power surges that damage its components.

Symptoms of a bad compressor start device include:

  • The refrigerator not cooling properly
  • The compressor not starting
  • Clicking noises from the back of the refrigerator
  • The refrigerator cycling on and off frequently

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You The freezer was not cold and all the items in the freezer went bad   John K. • Worcester , MA • March 28, 2016

Purchased a new starter and compressor run capacitor. Unplugged appliance from wall outlet. removed clip that holds these item in place. unplugged starter from compressor and from electrical wiring. plugged capacitor into starter, then plugged the electrical connection into assembly. Plugged starter into compressor. Plugged the appliance into wall outlet and the unit was running again Read more

More
$68.56
Compare At:
$81.59
You Save:
$13.03

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Run Capacitor
Genuine Frigidaire part
By: Frigidaire
Part Number: 218909912

Capacitor-run,220 vac ,12 microfarad

This part fixes the following symptoms
  • Won't start
  • Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You Freezer would not start   Thomas C. • Oxford , GA • October 03, 2014

Looked for obvious signs of mal-function, burned wires, etc. I found that the compressor controller(attached to the compressor) had an obvious burned-out spot. Took a chance that was the problem (it was); ordered all new OEM parts, including a new timer and run capacitor (a part that kicks in every time the compressor starts). I received the parts at 1 PM EST; by 1:48 PM I had the freezer working. Easily saved $250.00. A nice aside was that an Internet competitor was asking $53.00 for the same... Read more

More
$58.21
Compare At:
$69.85
You Save:
$11.64

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Compressor Start Device
Genuine Frigidaire part
By: Frigidaire
Part Number: 216954235

The Compressor Start Device is an OEM part for Frigidaire refrigerators. It plays a critical role in initiating the compressor, which is essential for the cooling process. This device helps the compressor start smoothly and efficiently, ensuring your refrigerator maintains the desired temperature.

Causes of a bad compressor start device can include electrical issues, normal wear and tear over time, or damage due to power surges or voltage fluctuations.

Symptoms of a bad compressor start device include:

  • The refrigerator not cooling properly
  • Clicking noises coming from the back of the refrigerator
  • The compressor not starting or running intermittently
  • Overheating of the compressor

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Fridge was getting warm and not coolimg   Regina L. • Spring , TX • July 01, 2017

I had a friend and a repair guy tell me it was the start relay that needed to be replaced, which was an easy fix. My friend said just to unplug the start relay, replace it with the new one, and it should be good. I've never tried to repair a fridge, and that was the easiest repair ever. Saved us hundreds of dollars! Read more

More
$62.95
Compare At:
$74.28
You Save:
$11.33

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Compressor Start Device (Ptc)
Genuine Frigidaire part
By: Frigidaire
Part Number: 241707715

This compressor start device briefly energizes the compressor's start winding to get it running, then disengages automatically. Replacing a weak or open PTC can restore cooling and stop the repeating hum-click from the compressor area.

  • Provides the initial boost for the compressor to start, then opens as the PTC warms
  • Helps the compressor start reliably on each cooling cycle
  • Works with the compressor's overload protector to safeguard the motor circuit
  • Common symptoms of failure: not cooling, compressor won't start, rapid clicking or hum-click every few minutes, intermittent cooling after power cycling
What's included: 1 PTC compressor start device Install notes:
  • Disconnect power and pull the unit forward to access the compressor compartment
  • Remove the start-device cover; note wire positions
  • Pull the old start device straight off the compressor terminals; avoid bending the pins
  • Align the new device with the C–S–R terminals in the same orientation, push on fully, reconnect wires, reinstall cover, and restore power
  • Inspect the mating overload protector and terminal connectors for heat damage before reassembly

Do-It-Yourself Stories from Customers like You Compressor would not start   John M. • Hagerhill , KY • May 28, 2017

New start device. Read more

More
$54.69
Compare At:
$65.08
You Save:
$10.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Controller (Electronic Control Board)
Genuine Frigidaire part
By: Frigidaire
Part Number: 216954218

This controller is the appliance's electronic control board. It manages key cooling functions and restores normal operation when the original board fails, helping the unit maintain stable performance and temperature. What it does

  • Directs power to compressor and fan motors to regulate cooling cycles
  • Interprets inputs from sensors/controls to maintain target temperature
  • Coordinates system operations for consistent performance
  • Common failure symptoms include no cooling, intermittent cooling, constant running, or unresponsive controls
What's included
  • 1 controller
Install notes
  • Disconnect power before servicing; observe ESD precautions when handling the board
  • Photograph wiring and note connector orientation before removal
  • Mount the new board securely and reconnect all harnesses fully seated
  • Restore power and monitor operation; allow time for temperatures to stabilize

Do-It-Yourself Stories from Customers like You Control panel cutting on and off and interior light also blinking when door was open and compressor short cycling   Jerry C. • Baytown , TX • November 15, 2019

Ordered control panel and run capacitor and compressor relay (or controller as they call it). Control panel was the problem but after 10 years of running never hurts to replace a capacitor and relay. Read more

More
$65.44
Compare At:
$77.87
You Save:
$12.43

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Starter (Compressor Start Relay)
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304508629

This starter is the compressor start relay that briefly powers the start winding to get the compressor turning. Replacing a weak or failed starter can restore reliable compressor startup and consistent cooling performance.

  • Engages the compressor's start winding at power-up, then disengages as the motor reaches speed
  • Helps prevent repeated clicking, stalling, and overheating at the compressor
  • Common symptoms include no cooling while fans run, compressor hums or clicks but won't start, or short-cycles on the overload
  • Physical signs may include heat damage or a burnt odor on the original start device
What's included: 1 starter Install notes:
  • Disconnect power and allow the compressor to cool before service
  • Discharge any capacitors per manufacturer instructions
  • Note wire positions and terminal orientation; transfer leads one at a time
  • Push the relay fully onto the compressor pins; ensure a secure fit without bending terminals
Also known as: start device, start relay, PTC relay

Do-It-Yourself Stories from Customers like You The power was still on but the unit no longer cooled   Kimberly B. • Santa Ana , CA • March 09, 2018

We replaced the starter and relay. Unit is working properly. We saved over $150 by replacing the parts in question. Read more

More
$45.95
Compare At:
$54.68
You Save:
$8.73

IN STOCK
Ships Today Guaranteed
Add to Cart
Frigidaire Controller Kit (Electronic Oven Control), 1 Kit
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304491584

This controller kit is the electronic oven control module that governs bake, broil, and temperature functions. Replacing a failing control restores accurate oven operation and responsive keypad/display performance.

  • Regulates oven heating cycles and temperature feedback from the sensor
  • Controls bake/broil relays and user interface responses
  • Common failure symptoms: no bake/broil, temperature inaccuracy, unresponsive buttons, blank or erroring display
  • May recover from intermittent power-up, beeping, or F-codes tied to the control
What's included: One control board with kit-specific components per OEM packaging Install notes:
  • Disconnect power before servicing; high voltage is present
  • Handle the board by edges; avoid static discharge to components
  • Transfer all wiring one connector at a time to the matching locations
  • After installation, restore power and verify oven operation and temperature calibration

Do-It-Yourself Stories from Customers like You Freezer would not start   Thomas C. • Oxford , GA • October 03, 2014

Looked for obvious signs of mal-function, burned wires, etc. I found that the compressor controller(attached to the compressor) had an obvious burned-out spot. Took a chance that was the problem (it was); ordered all new OEM parts, including a new timer and run capacitor (a part that kicks in every time the compressor starts). I received the parts at 1 PM EST; by 1:48 PM I had the freezer working. Easily saved $250.00. A nice aside was that an Internet competitor was asking $53.00 for the same... Read more

More
$74.95
Compare At:
$89.19
You Save:
$14.24

IN STOCK
Ships Today Guaranteed
Add to Cart
Frigidaire Capacitor
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304470340

This capacitor stores and releases electrical energy to help a motor or compressor start and run smoothly. Replacing a weak or failed capacitor can restore proper startup, reduce humming, and improve overall cooling performance.

  • Provides the phase shift and torque boost needed for AC motors to start
  • Stabilizes motor operation during run for consistent performance
  • Common symptoms of failure: motor/compressor hums but won't start, intermittent starting, reduced cooling/airflow
  • Visual clues include a swollen/bulging top or leaking oil residue
  • Contribute to breaker trips or overheating when degraded
What's included: 1 capacitor Installation notes:
  • Disconnect power and safely discharge the old capacitor before handling
  • Photograph wiring and transfer leads to the matching terminals on the new capacitor; match microfarad (µF) and voltage ratings to the original
  • Mount securely; avoid contact with sharp edges or moving parts
  • Check the motor/compressor and wiring for additional faults

Do-It-Yourself Stories from Customers like You The power was still on but the unit no longer cooled   Kimberly B. • Santa Ana , CA • March 09, 2018

We replaced the starter and relay. Unit is working properly. We saved over $150 by replacing the parts in question. Read more

More
$11.42
Compare At:
$13.70
You Save:
$2.28

IN STOCK
Ships Today Guaranteed
Add to Cart
Frigidaire Electronic Control Board (Refrigerator)
Genuine Frigidaire part
By: Frigidaire
Part Number: 216954214

This controller is the refrigerator's electronic brain, managing cooling and defrost operations to keep temperatures stable. Replacing a failed board restores reliable compressor, fan, and defrost control when cooling becomes erratic.

  • Regulates compressor and evaporator fan operation to maintain set temperatures
  • Manages the defrost cycle to prevent frost/ice buildup on the evaporator
  • Coordinates inputs from sensors/switches for consistent, efficient cooling
  • Common failure symptoms include poor or intermittent cooling, heavy frost on the back wall/evaporator, constant running or short-cycling, or failure to start
What's included: One electronic control board Installation notes:
  • Disconnect power before servicing and use ESD precautions when handling electronics
  • Access the control location (typically in the control housing or rear compartment) and photograph wiring for reference
  • Transfer connectors one at a time to the new board; ensure all plugs are fully seated and harnesses are routed safely
  • Reassemble panels, restore power, and verify normal compressor/fan operation

Do-It-Yourself Stories from Customers like You Compressor continued to run hot freezer stopped cooling start device making clicking noise   Gerry L. • Lewiston , ME • October 09, 2015

Ordered replacement parts. Installation was under ten minutes. Took longer to move appliance than to fix it. Most amazing of all was the turn around time to order and receive the parts. Ordered online Tuesday around 3 pm. Parts received the next day FedEx around 2 pm. Way to go AppliancePartsProps. I'm a three time past customer, four with this order. Now i'm hooked for life. Read more

More
$54.69
Compare At:
$65.08
You Save:
$10.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Frigidaire Controller Compressor
Genuine Frigidaire part
By: Frigidaire
Part Number: 216954236

The Compressor Controller is an OEM part for Frigidaire refrigerators. It is a component responsible for monitoring and regulating the compressor.

The controller allows the compressor to operate efficiently based on temperature inputs from sensors located throughout the refrigerator and freezer compartments. It controls compressor cycling intervals based on sensor readings in order to maintain optimal cooling.

Symptoms of a faulty controller include:

  • Fluctuating interior refrigerator temperatures
  • Compressor runs continuously without cycling off
  • Compressor fails to turn on at all

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You The run capacitor caught fire.   David C. • Hudson , OH • December 22, 2020

After smelling and seeing the smoke I was able to spot the defective parts. Where the run capacitor connects to the control-compressor is where it was burning. So I went to the Appliance Parts Pros website and put in the model number and the diagram of parts come up. I ordered the new parts, the control-compressor, and the run capacitor. Quick shipping. Installed and works ss required. Read more

More
$67.95
Compare At:
$80.18
You Save:
$12.23

IN STOCK
Ships Today Guaranteed
Add to Cart
Frigidaire Controller Kit (Electronic Control Board)
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304491585

This controller kit replaces the appliance's electronic control board, restoring proper power-up, keypad/display response, and reliable operation of controlled functions. Use it to address unresponsive controls or erratic behavior caused by a failed control board. What it does:

  • Manages operation of key components based on sensor inputs and user settings
  • Processes keypad/remote commands and powers display, mode, and timer circuits
  • Coordinates temperature feedback to maintain selected settings
  • Common failure symptoms include no display, unresponsive buttons, will not start, intermittent cycling, or error codes
What's included:
  • One controller kit
Install notes:
  • Disconnect power before servicing; allow capacitors to discharge
  • Use ESD precautions; handle the board by the edges only
  • Access the control compartment; photograph wiring and move connectors one at a time to the new board
  • Securely mount the board, restore power, and test all functions

Do-It-Yourself Stories from Customers like You Controller and capacitor that start the compressor in our freezer failed and burned causing burning plastic smell.   M. H. • Madison , MS • December 08, 2020

An appliance repairman came to diagnose the issue causing the burning smell and the reason the 17- year old Frigidaire freezer was not cooling. He plugged the freezer back in and it immediately flamed up revealing the failed power overload controller. He tested the controller and the attached capacitor and found they had both failed. He quoted $556 to replace the failed parts to resolve the issue. We initially decided the replace the whole freezer given its age, but due to the China virus,... Read more

More
$73.95
Compare At:
$95.57
You Save:
$21.62

IN STOCK
Ships Today Guaranteed
Add to Cart

Frigidaire relay, overload, and capacitor replacement parts are key players in keeping your Frigidaire appliances running smoothly. These components play a crucial role in ensuring your appliances operate efficiently, which is something every homeowner can appreciate.

Imagine your refrigerator or washer reaching peak performance every time you use it. That's what Frigidaire parts like relays, overload protectors, and capacitors do—they maintain and restore the functionality of your machine. The relay helps in starting the appliance's motor, the overload protector safeguards it from overheating, and the capacitor ensures the motor runs effectively. Together, these parts keep your appliances working like clockwork.

Using OEM Frigidaire replacement parts guarantees quality and compatibility, ensuring your repairs are seamless. Original parts fit perfectly and are designed to work in harmony with the rest of your appliance's components, making them the best option for maintaining reliability and performance.

Whether you're looking to replace a worn-out relay, an aged capacitor, or an overloaded protector, rest assured that high-quality Frigidaire parts are available to help you keep your appliance in top shape. Your neighbors might not see the effort, but they'll surely appreciate the reliability of your well-maintained machines.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store