Frigidaire Range Knob, Dial & Button

This replacement control knob restores safe, easy control of your oven or range functions. It provides a direct fit for the front control shaft so you can select temperatures and cooking settings with a secure, tactile grip. What it does

• Replaces a worn, cracked, or missing control knob so settings can be changed reliably
• Engages the control shaft to turn function and temperature selector switches
• Helps stop slipping or loose rotation that prevents accurate settings
• Common symptom: knob won't stay on shaft, is hard to turn, or is visibly damaged

• One control knob (single)

• Remove power to the appliance (unplug or switch off breaker) before replacing knobs
• Pull the old knob straight off the control shaft; press the new knob fully onto the shaft until seated
• If knob does not fit, check shaft style and part number before returning

This replacement control knob restores tactile control for a range or cooktop and makes temperature and burner selection easy to read and adjust. It snaps onto the valve stem to replace a cracked, stripped, or missing knob. What it does:

• Fits onto the stove/range valve stem to set burner heat or oven functions
• Replaces broken, melted, stripped, or missing knobs that are difficult to turn
• Provides a secure, friction-fit grip for accurate adjustments
• Restores the original look and operation of the control panel

• Pull the old knob straight off the control stem; push the replacement knob fully onto the stem until secure
• Match the knob orientation to the valve index or indicator before use
• If the knob won't seat, inspect the stem and replace the underlying valve if damaged
• Disconnect power at the breaker and allow surfaces to cool before servicing to avoid burns or shock

Color: Black

This surface burner knob mounts to the cooktop control shaft so you can turn the burner on and choose the heat level. Replace a broken or stripped knob to restore safe, accurate control and a clean, finished look.

• Attaches to the burner valve or surface element switch shaft
• Provides on/off and heat-level selection
• Replaces knobs that are cracked, missing, loose, or stripped
• Helps keep settings aligned for consistent results

• Allow the cooktop to cool; switch off power at the breaker or shut off gas
• Pull the old knob straight off the control shaft—do not pry on the panel
• Align the new knob with the shaft shape and push straight on until fully seated
• If the shaft is worn or damaged, the valve or switch may require service

Replace a worn or missing control knob and restore precise, dependable setting selection on your appliance. This knob press-fits onto the control shaft to provide a secure grip and smooth, consistent operation.

• Attaches to the control shaft on the front panel
• Lets you turn the control to select heat, temperature, or function settings
• Common symptoms: cracked hub or stripped insert; knob wobbles, slips, falls off, or won't turn the control

• Disconnect power before servicing; shut off gas supply
• Pull the old knob straight off; align the flat/D-shape on the new knob with the shaft and press fully into place
• Do not use excessive force or tools; avoid bending the control/valve stem

A replacement control knob that restores tactile control of your appliance's setting dials and provides a clear indicator for selecting temperature or cycle positions. Simple push-on design replaces worn, cracked, or missing knobs for reliable use. What it does:

• Replaces a damaged or missing control knob so settings can be changed safely and accurately.
• Provides a visible pointer to selected heat, time, or cycle positions.
• Restores a secure grip when the original knob is loose, stripped, or slipping.
• Works with compatible Frigidaire control shafts that accept push-on style knobs.

• Always disconnect power to the appliance before replacing control knobs to avoid electrical or burn hazards.
• Remove the old knob by pulling it straight off the control shaft; align the new knob's opening with the shaft and push firmly until fully seated.
• No special tools are typically required, but use steady, even force to avoid damaging the shaft or new knob.

This replacement control knob restores smooth, precise adjustment of your appliance's control when the original is cracked, stripped, or missing. A fresh knob improves grip and pointer visibility so settings are easy and accurate to select.

• Attaches to the control shaft to adjust the setting
• Common symptoms: cracked or broken knob, slips or won't turn the control, falls off, faded indicator/graphics
• Restores proper alignment and feel for reliable operation
• Direct, push-on style replacement on applicable models

• Disconnect power; if servicing a gas appliance, also shut off the gas supply
• Pull the old knob straight off the shaft
• Align the new knob with the shaft and press it on fully until seated
• Verify smooth operation and correct pointer alignment before use

This replacement control knob restores a worn, cracked, or missing selector on your range or oven so you can set temperatures and function settings with a secure, easy-to-grip control. Fits original shaft style for a direct swap. What it does:

• Replaces a damaged or missing range/oven control knob for reliable temperature and function selection
• Provides a firm grip and clear pointer for accurate setting adjustments
• Helps stop slipping, wobbling, or intermittent contact caused by worn knobs
• Restores the original look and operation of the front control panel

• Remove power to the appliance before replacing knobs (unplug or shut off circuit breaker)
• Pull off the old knob straight from the control shaft; push the replacement knob fully onto the shaft until seated
• For gas appliances, ensure controls are in the OFF position before testing

The Knob is an OEM part for Frigidaire cooktops. It is designed to provide precise control over your range's heating elements, allowing you to adjust the temperature setting effortlessly. The knob attaches directly to the stove's control switch, enabling easy operation for both cooking and baking. 

Color: White

Causes of a bad range knob can stem from frequent use, accidental impacts, or exposure to extreme temperatures.

Symptoms of a bad Knob include:

• Difficulty in turning the knob, which could be due to internal stripping or damage.
• The knob not aligning properly with the correct settings.
• Cracks or breakage that prevent the knob from functioning correctly.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

A replacement thermostat knob that restores grip and control for your refrigerator's temperature dial. Makes it easy to set and adjust the control, replacing cracked, faded, or missing knobs for reliable operation. What it does

• Replaces a worn, cracked, or broken temperature control knob so you can set the fridge temperature accurately
• Fits over the temperature control shaft and provides a secure, comfortable grip for adjustments
• Restores the visual temperature index and plain-English control feel
• Helps stop slipping or spinning knobs that make settings hard to maintain

• Disconnect power or unplug the appliance before beginning any service
• Typically installs by pulling the old knob straight off the control shaft and pressing the new knob onto the shaft until seated
• Align internal splines with the control shaft; do not force or over-rotate — if it won't seat, re-check alignment

This replacement thermostat control knob restores a secure grip and accurate setting selection for your appliance's temperature control. It gives a crisp, positive feel when turning the thermostat and replaces worn, cracked, or missing knobs. What it does

• Fits onto the thermostat control shaft to let you set temperature positions easily
• Re-establishes a secure mechanical connection when an old knob is loose, cracked, or broken
• Helps prevent accidental setting changes by providing a solid detent feel
• Useful when the original knob is missing or does not turn smoothly

• Turn power to the appliance off before servicing controls
• Align the knob splines with the control shaft and push straight on until fully seated
• If the shaft or adapter is damaged, inspect and replace those components as needed
• No special tools typically required; handle gently to avoid damaging the shaft or surrounding trim