Frigidaire Range Heating Element

Fix a burner that won't heat on your glass cooktop. This radiant surface element restores even heating and temperature control. DIY-friendly repair.

This is a dual radiant surface element that mounts beneath the glass cooktop on a smooth-top electric range. It provides heat for cooking by radiating energy through the glass surface and can operate at two different diameters for different pot sizes. Replace this element if the burner no longer heats, heats unevenly, only partially lights up, or if you see visible damage such as cracks or burn spots in the coil.

Oven not heating or baking unevenly? This lower bake element restores consistent bottom heat for proper baking temperatures and even cooking results.

Burner won't heat or randomly stays on? This range heating element restores proper burner function. DIY repair takes about 30 minutes with basic tools.

Fixes uneven browning or broiler not heating. This upper heating element restores high-heat broiling in electric ovens. Moderate DIY difficulty.

Oven won't heat or takes too long to preheat? A failed bake element is the likely cause. This bottom heating element is a straightforward 15-minute DIY fix.

This is a triple radiant surface element used on glass-top electric ranges. It provides heat to the cooktop surface and typically features multiple heating zones for different pot sizes. Replace this element if your cooktop burner is not heating evenly, only partially heating, or not turning on at all.

Size: 8 inch. 2200 watt. Radiant.

The bake element is the lower oven heating element that produces heat during bake cycles. Replacing a failed element restores proper preheating and even baking performance when your range no longer heats correctly in bake mode.

• Provides bottom-up heat in bake mode to reach and maintain set temperatures
• Typical symptoms include no heat in bake, excessively long preheat, or uneven/undercooked results
• Visual clues of failure may include blisters, cracks, or burnt spots on the element
• A shorted element may trip a household breaker when energized

• Disconnect power at the breaker before servicing; verify no power to the range
• Remove oven racks; unfasten the element from the rear wall and gently pull it forward to access terminals
• Transfer the wires to the new element one at a time; do not let wires retract into the rear panel
• Reinstall and secure the element, ensure connections are fully seated and clear of metal, restore power, and test

This is a 9-inch, 2500-watt radiant surface element that sits beneath the glass cooktop on a smooth-top electric range. It generates heat through a coiled ribbon element to warm cookware placed on the corresponding burner zone. Replace this element if the burner fails to heat, heats unevenly, or glows only partially when turned on.

This is a radiant bridge surface element that provides heat across an elongated cooking zone on a glass cooktop, ideal for griddles or oblong cookware. It operates at 1800 or 2600 watts depending on the selected setting. Replace this element if the bridge zone fails to heat, heats unevenly, or does not respond to temperature adjustments.

Burner not heating evenly or won't turn on? This surface coil element restores full heat output on electric ranges. Direct plug-in replacement.

This is a 9-inch radiant heating element designed for a smooth glass cooktop surface on a range. It provides heat to the cooking surface when a burner is turned on. Replace this element if the burner does not heat, heats unevenly, or fails to reach the correct temperature.

Fix a burner that won't heat or only partially lights up. This top heating element restores full heat to your range cooktop. DIY install in about 1 hour.

Fixes burner not heating or heating unevenly on your cooktop. Direct plug-in replacement surface element. Moderate DIY repair, typically 15-30 minutes.

Fix a burner that won't heat or heats unevenly with this electric range top element. Direct replacement part restores proper cooking performance.