Frigidaire Refrigerator Door

The Dairy Door is an OEM replacement part for  Frigidaire side-by-side refrigerators. Located inside the fresh food compartment, it provides a dedicated storage area for milk, yogurt, cheese and other dairy products requiring colder temperatures. The door measures approximately 9 inches wide and 5 inches high.

Causes of a bad dairy door include normal wear from repeated opening and closing over time. Exposure to spills inside the refrigerator can also potentially damage door shelf components or seals.

Symptoms of a bad dairy door are: 

• Difficulty opening or closing the door smoothly  
• Door alignment issues where it does not sit flush in the frame
• Leaks or moisture inside the dairy storage area
• Damage or cracks in shelf supports or gasket seals

This OEM part is also compatible with models from brands like Electrolux, Gibson, and Kelvinator brand models.

NOTE: For white use 240337701

The Flipper Mullion Assembly is an OEM part for Frigidaire refrigerators. It is an exterior part that seals the refrigerator door and houses the water and ice dispenser on select models. The flipper mullion assembly attaches both side by side doors together and operates the dispenser and door functions.

Causes of a bad mullion assembly can include damage from door impacts, wear from years of door swing motions, or failure of seals or gaskets.

Symptoms of a bad Flipper Mullion Assembly include:

• Gaps or air leaks around the refrigerator doors when closed
• Loose, sagging or misaligned doors
• Dispenser components like the water valve not functioning properly

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
 

Replaces cracked, broken, or missing dairy compartment door on your refrigerator. Installs on the inside of the main door to restore access and freshness.

White dairy compartment door cover for refrigerators. Replaces cracked, broken, or missing dairy tray doors. Snaps into place on the refrigerator door.

Center flipper mullion assembly that separates fresh food and freezer compartments. Replace if cracked, broken, or hinge mechanism is worn or damaged.

Replacement door liner guide for bottom-mount refrigerators. Aligns and supports the door liner panel. Replace if cracked, broken, or worn out.

Vertical flipper mullion assembly mounts to fresh-food door and pivots to seal center gap between French doors. Replace if cracked, broken, or rusting.

The Mullion is an OEM part for Frigidaire refrigerators. It is situated between the freezer and refrigerator doors to separate the two compartments. The mullion provides structure, sealing the doors against air and temperature leakage.

Causes of a bad mullion can include wear and tear over time, damage from frequent door opening and closing, or impact damage.

Symptoms of a bad mullion include:

• Air and temperature leakage between compartments
• Difficulty closing one or both doors securely
• Gaps or cracks seen around the mullion frame
• Scratches, dents or other physical damage

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Restores the interior door surface. Supports door bins and shelves while providing a stable base for the gasket seal. Replace if cracked or broken.

Covers the service opening on your refrigerator. Replace if cracked, broken, or missing to protect internal components and maintain a clean appearance.

This small permanent magnet is used in supported refrigerator assemblies to actuate a mating reed switch or metal keeper. It helps the appliance recognize a closed position or hold a light cover/door closed for proper operation. What it does:

• Works with a reed switch or ferrous keeper to provide position sensing or magnetic latching
• Helps ensure features dependent on closed position operate correctly
• Can resolve issues where a small cover or door won't stay closed
• Address erratic "door ajar" indications tied to magnetic sensing

• Disconnect power and water before servicing
• Note the original magnet's location and orientation; polarity matters for proper operation
• Seat the magnet fully in its pocket or holder and align with the mating switch/keeper
• Test the related function before reassembling panels and trim

Outer freezer door panel for top-mount refrigerators. Replaces cracked, dented, or discolored door panels. Restores appearance and structure.

Outer door panel for refrigerator freezer compartment. Replaces cracked, dented, or damaged exterior door surface. Restores appearance and structure.

Flip-up cover for the dairy compartment on your refrigerator's fresh-food door. Keeps butter and cheese contained. Replace when cracked, broken, or missing.

Outer door panel for refrigerator freezer compartment. Replaces cracked, dented, or discolored panels. Restores the appearance of your freezer door.

Outer door panel for bottom-mount refrigerators. Replaces cracked, dented, or discolored exterior panels to restore your refrigerator's appearance.