Frigidaire Refrigerator Ice Bin, Bucket, Or Tray

The Ice Container Assembly is an OEM replacement part for Frigidaire refrigerators. This component serves as the storage bin or receptacle for the ice produced by the icemaker, providing a convenient and accessible location for the ice.

Symptoms of needing to replace the ice container assembly include:

• Cracks, damage, or visible deterioration of the container
• Ice spilling or not dispensing properly from the container
• Issues with the proper fitting or alignment of the container

Causes of a faulty ice container assembly can include normal wear and tear, accidental impact or mishandling, exposure to excessive moisture or temperature fluctuations, or issues with the icemaker mechanism itself.  

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

The Ice Bucket Housing is an OEM part for Frigidaire refrigerators. This component serves as the main enclosure for the ice bucket, supporting and protecting the ice maker's storage bin. It is designed to fit securely within the freezer compartment, helping to maintain the ice in a solid state by insulating it from varying freezer temperatures and ensuring that ice production is efficient and consistent.

Symptoms of a failing Ice Bucket Housing include:

• Ice melting or clumping together due to poor insulation
• Difficulty in removing or replacing the ice bucket because of misalignment or damage to the housing
• Cracks or damage in the housing that can lead to frost buildup or leakage
• Unusual noises from the ice dispenser if the housing obstructs the dispensing mechanism

Causes of a bad ice bucket housing often involve physical impacts from handling, thermal stress from fluctuating freezer temperatures, or degradation of materials over time, leading to brittleness and breakage.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models

Note: For the complete ice container assembly with auger and moving parts, order part number 241860803.

The Ice Container Assembly is an OEM part for Frigidaire refrigerators. This assembly is responsible for storing ice that is produced by the icemaker. It fits within the freezer compartment, providing a dedicated space for ice storage, ensuring easy access and organized containment.

Causes of a bad ice container assembly can include wear and tear from regular use, physical damage from dropping or mishandling, and exposure to extreme temperatures which can make the plastic brittle over time.

Symptoms of a bad ice container assembly include:

• Cracks or holes in the container
• Ice spilling or not being contained properly
• Difficulty in inserting or removing the container from the freezer
• Ice melting or clumping due to poor insulation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Ice Container Assembly is an OEM part for Frigidaire refrigerators. This part stores ice produced by the icemaker, providing a convenient and accessible location for ice storage within the freezer.

Common causes of a bad ice container assembly include cracks or breaks from dropping the container, wear and tear from frequent use, or damage from excessive force when removing or inserting the container.

Symptoms of a bad Ice Container Assembly include:

• Cracks or breaks in the container
• Ice spilling out or not staying contained
• Difficulty in inserting or removing the container
• The container not fitting properly within the freezer

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Restore reliable dispensing with this replacement ice container assembly. It stores the ice beneath the icemaker and feeds it to the dispenser, replacing cracked or worn bins that cause jams, noise, or poor ice delivery.

• Stores and holds ice cubes in the freezer until dispensing
• Guides and feeds ice toward the chute when the dispenser is activated
• Maintains proper alignment with the drive to reduce jams and grinding
• Common signs it's needed: cracked/broken bucket, ice won't dispense or is intermittent, loud grinding during dispense, bin won't seat securely

• Disconnect power before service; empty any ice from the old bin
• Press the release, slide the old container straight out; align and slide the new one in until fully seated
• Ensure the rear drive coupling is engaged; do not force the bin
• Restore power and test the dispenser

The Ice Container Assembly is an OEM replacement part for Frigidaire refrigerators that stores ice made by the ice maker. It includes the container, auger for ice dispensing, and other mechanisms for storage and dispensing. 

A bad Ice Container Assembly can result from container cracks or damage, causing ice spills, auger wear affecting dispensing, blockages halting ice movement, and parts wear hindering efficient ice dispensing.

Symptoms of a malfunctioning Ice Container Assembly include:

• Inability to dispense ice.
• Ice clumping together, indicating a possible air leak or temperature issue within the container.
• Unusual noises during operation, which could point to a mechanical problem with the auger or other components.
• Leakage or water accumulation, suggesting a crack or damage to the container.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Ice Container Assembly is an OEM part for Frigidaire refrigerators. This part stores ice produced by the icemaker, allowing for convenient access and organization of ice within the freezer compartment.

Causes of a bad ice container assembly can include wear and tear over time, damage from frequent handling, or cracking due to extreme temperature changes.  

Symptoms of a bad ice container assembly include:

• Cracks or damage to the container
• Leaking water or melted ice
• Ice not dispensing properly
• Unusual noises from the ice storage area

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Ice Container Assembly is an OEM part for Frigidaire refrigerators. This part collects and holds the ice produced by the icemaker.

Causes of a bad Ice Container Assembly can include physical damage from impact or mishandling, freezing and cracking due to extreme temperatures, or general wear and tear over time.

Symptoms of a faulty Ice Container Assembly include:

• Ice not dispensing properly or getting stuck
• Cracks or damage to the container itself
• Leaks or water accumulation around the container
• Difficulty removing or reinserting the container

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Ice Container is an OEM replacement part for Frigidaire refrigerators. It is responsible for storing ice produced by the ice maker.

Causes of a bad ice container can include wear and cracks that develop over repeated use and cleaning. Minerals or scale deposits may also accumulate inside over time.

Symptoms of a bad ice container include:

• Ice spilling or leaking out of the container 
• Cracks or breaks that compromise the storage cavity
• Chipping of the plastic coating inside the container

This OEM Frigidaire replacement part is compatible with refrigerators from Electrolux, Gibson, and Kelvinator as well.

This is an ice bin that is used on refrigerator and freezer units. The purpose of this part is to store the ice that has already been made so that it is ready for dispensing. The auger is included with this part, which is the component that drives the ice out of the freezer for dispensing. Over time, the white plastic material that the bin is made of may begin to crack or break due to exposure to extreme temperatures over time. If this is the case, it will need to be replaced. If the auger no longer functions, it could have become damaged and this part will also replace the auger itself. Wear work gloves when replacing this part.This ice bin is compatible with refrigerator and freezer units that have been manufactured by Kenmore Elite, Kenmore Pro, Kenmore, and Frigidaire. It is sold individually. This part is sourced directly from the manufacturer.

This ice container assembly stores ice in the freezer and feeds it to the dispenser. Replacing a cracked or stripped bin helps restore smooth, reliable dispensing of cubed or crushed ice from your refrigerator.

• Holds finished ice beneath the icemaker and connects to the auger drive to move ice to the door chute
• Internal mechanism advances ice and enables crushed-ice operation when selected
• Helps resolve no or intermittent ice dispensing, auger slippage, or inconsistent cubed/crushed output
• Direct replacement for damaged or cracked ice buckets

• Disconnect power and turn off the icemaker; wear cut-resistant gloves
• Lift out the old bin; discard clumped ice and clear any jams in the chute
• Align the auger drive coupling and slide the new assembly fully into place
• Restore power and test both cubed and crushed dispense modes

Replace a cracked or worn bin to help restore dependable dispensing. This ice container assembly holds ice from the icemaker and, when you press the dispenser, moves it toward the chute for cube or crushed ice. What it does:

• Stores and contains ice in the freezer until dispensing
• Interfaces with the auger drive to feed ice toward the dispenser chute
• Works with the crusher/cube selection mechanism (model dependent)
• Common symptoms include no or slow dispensing, cracked/leaking bin, or ice jams/clumping

• 1 ice container assembly

• Disconnect power to the refrigerator before servicing
• Empty the old bin and pull it straight out of the freezer compartment
• Transfer any reusable parts from the old assembly
• Align the drive coupling and slide the new container fully into place; restore power and test dispensing

This is the complete ice container assembly for the dispenser. It stores ice and drives cubes to the chute so your dispenser can deliver ice reliably and without jams.

• Holds finished ice in the freezer and feeds it to the dispenser
• Integrated auger moves and helps break up ice for consistent dispensing
• Common failure signs: ice not dispensing, auger not turning, loud grinding, or cracked/leaking bucket
• Restores proper in-door ice dispensing performance

• Unplug the refrigerator and remove the ice bin from the freezer door or shelf
• Transfer any remaining ice to a cooler; let any frost melt to avoid damage
• Align the drive coupling and slide the new bin fully into place
• Restore power and test ice dispense for cube and crush functions

This OEM replacement part is an ice container for refrigerators. The ice container is the plastic bucket that holds the ice that is made by the icemaker. Over time, an ice container can become damaged due to excessive wear and tear. If the ice container is cracked or broken to the point where it can no longer hold ice, it will need to be replaced.To replace the ice container, start by unplugging the refrigerator. Once unplugged, proceed to open the freezer door. Locate the two mounting screws that attach the ice container to the icemaker. Once found, proceed to unthread the screws to remove the old container. After pulling the old container out, slide the new one in place and fasten the mounting screws that secure it to the icemaker. This genuine replacement part is sourced directly from the manufacturer and is sold individually. It is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, and Westinghouse brand refrigerators.

This replacement ice container assembly stores and delivers ice from the freezer to the dispenser. Replacing a cracked or jammed bin restores smooth cubed/crushed dispensing and dependable ice flow.

• Holds harvested ice in the freezer and interfaces with the dispenser
• Feeds ice toward the chute when you press the dispenser lever
• Supports cubed or crushed selections (as designed for your model)
• Common symptoms: won't dispense, dispenses slowly, only cubes or only crushed, cracked/warped bucket, grinding or jamming noises

• Unplug the refrigerator and wear cut-resistant gloves
• Empty remaining ice, release and lift out the old bin, then slide the new assembly fully into place
• Restore power and test both cube and crush functions at the dispenser

Optional flexible ice tray for those that dont have an icemaker