Frigidaire Refrigerator Valve

This Refrigerator Water Valve is a genuine OEM replacement part for Frigidaire refrigerators. It is responsible for controlling the flow of water into the refrigerator's ice maker and water dispenser. This part ensures a steady and reliable water supply for ice production and water dispensing.

Causes of a bad water valve can include a faulty solenoid, clogged or blocked water lines, or a malfunctioning water pressure regulator. These issues can result in a variety of problems, such as slow or no ice production, weak water flow from the dispenser, or leaks around the valve.

Symptoms of a bad water valve include:

• No ice cubes being produced
• Low water pressure or weak water flow from the dispenser
• Leaks around the water valve or water lines
• Inconsistent ice production or dispensing

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Water Inlet Valve is an OEM replacement part for Frigidaire washing machines. It is a component responsible for controlling the flow of water into the washing machine tub during the wash and rinse cycles.

Symptoms of a faulty Water Inlet Valve include:

• No water or insufficient water entering the washing machine tub
• Washing machine not filling or taking an excessive amount of time to fill
• Leaks or water dripping from the inlet valve area
• Unusual noises or vibrations during the fill cycle

Causes of a bad water inlet valve can include normal wear and tear over time, sediment buildup or blockages, electrical malfunctions, or physical damage from water pressure issues or freezing conditions.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore washing machine models.

The Water Valve is an OEM part for Frigidaire refrigerators. It is crucial for controlling the flow of water to the ice maker and water dispenser. This solenoid-operated valve responds to commands from the refrigerator's electronic control to supply water when needed, ensuring efficient operation and reliable delivery of ice and water.

Symptoms of a bad Water Valve include:

• No water being dispensed
• The ice maker not producing ice or producing very small ice cubes
• Water leaking from the valve

Causes of a bad water valve can include mineral deposits blocking the valve, electrical failures preventing the valve from opening, or wear and tear from normal use leading to leaks or operational failures.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Water Inlet Valve is an OEM part for Frigidaire refrigerators. It is designed to manage the flow of water to the ice maker and water dispenser. This solenoid-operated valve responds to commands from the refrigerator's electronic control, opening to allow water in and closing to stop the flow, ensuring proper operation of both ice production and water dispensing functions.

Symptoms of a bad Water Inlet Valve include:

• No water being dispensed or ice being made
• Leaking water at the back or bottom of the refrigerator
• An unusually noisy operation when the valve is activated

Causes of a bad water inlet valve can include mineral buildup, which may obstruct the flow of water, mechanical failure of the solenoids, or wear and tear that leads to leaks or failure to open/close properly.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Solenoid and Yoke Assembly is an OEM part for Frigidaire refrigerators. It is used in the ice dispensing system to control the movement of the ice chute, allowing ice to be dispensed from the refrigerator door.

Causes of a bad solenoid and yoke assembly can include electrical issues such as a burnt-out solenoid, wear and tear from regular use, or physical damage due to mishandling or impact.

Symptoms of a bad solenoid and yoke assembly include:

• Ice not dispensing or dispensing intermittently
• Strange noises when attempting to dispense ice
• The ice chute not opening or closing properly
• Error codes related to the ice dispensing system

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Water Inlet Valve is an OEM part for Frigidaire refrigerators. It controls the flow of water into the refrigerator's ice maker and water dispenser, ensuring a steady and reliable water supply. This valve opens and closes as needed, allowing water to enter the ice maker and dispenser for proper operation.

Causes of a bad water inlet valve can include mineral buildup, wear and tear, or electrical issues. A malfunctioning valve can lead to problems with water flow, affecting the refrigerator’s ability to produce ice and dispense water properly.

Symptoms of a bad water inlet valve include:

• No water dispensing from the refrigerator
• Ice maker not producing ice
• Leaks from the valve area
• Unusual noises coming from the valve

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This refrigerator water inlet valve uses an electric solenoid to control the flow of household water into the appliance. Replacing a failing valve helps restore proper ice production and reliable dispenser operation while preventing unwanted drips or overfilling.

• Opens when energized to allow water into the ice maker and/or dispenser; closes to stop flow
• Common symptoms: no ice or no water, slow fill or hollow cubes, continuous dripping/overfill, buzzing/humming with no water, or leaks at the valve area
• Restores correct water control and shutoff at the rear of the refrigerator

• Disconnect power and turn off the household water supply before servicing
• Pull the refrigerator forward carefully; place a towel or container to catch residual water
• Note tubing and wire locations to ensure correct reassembly; transfer any mounting bracket/fittings from the old valve if needed
• After installation, restore water and power, inspect all connections for leaks, and purge air from the line (run dispenser, if equipped)

This refrigerator water inlet valve controls the flow of household water into the icemaker during the fill cycle, helping restore dependable ice production and preventing drips by sealing closed when not energized. What it does

• Opens on command to supply water to the icemaker; closes to stop flow
• Regulates fill volume for proper cube size and consistent operation
• Common failure symptoms may include no ice production, icemaker won't fill, small or hollow cubes, water leaking near the rear valve area, or a humming/buzzing sound with no water

• One water inlet valve assembly

• Unplug the refrigerator and shut off the household water supply before servicing
• Relieve line pressure; place a towel or container to catch residual water
• Note wire and tube positions; transfer any fittings or the mounting bracket from the original valve if required
• Restore water and power, check all connections for leaks, and run a test fill to purge air

This solenoid assembly is an electromechanical plunger actuator that restores linear motion to a linked mechanism. Replacing a failed solenoid helps return reliable actuation for latches, valves or dispenser-style components and stops intermittent or non-moving operation. What it does

• Converts electrical signals into linear movement to operate a latch, valve or dispenser actuator.
• Typical symptoms: clicking or humming without movement, intermittent operation, or complete loss of actuation.
• Restoring the solenoid can eliminate sticking mechanisms and return consistent operation.

• Disconnect power (and water, if applicable) before starting work to avoid shock or flooding.
• Remove access panels and note wiring locations; reconnect matching connectors securely.
• Handle the plunger and coil carefully; do not force into place or bend mounting tabs.
• Test operation after installation.

This single water inlet valve regulates water flow into your refrigerator. When energized, it opens to supply water and closes to stop it—restoring consistent filling for ice production and any water dispensing your model supports.

• Controls on/off water flow to the ice maker and/or dispenser (model dependent)
• May resolve no ice, slow or hollow cubes, or a dispenser that won't dispense or is weak
• Can correct intermittent dripping or leaks at the rear caused by a valve that won't fully close
• A humming valve with little or no water flow can indicate a failed solenoid or internal blockage

• Unplug the refrigerator and shut off the household water supply before servicing
• Place a towel/container to catch residual water; relieve line pressure if possible
• Note wire and tube locations; transfer to the new valve and seat/tighten fittings securely
• Restore water and power, then check all connections for leaks and run a test fill

This dual-solenoid water valve controls water flow to the refrigerator dispenser and icemaker, restoring fill and dispensing when the machine calls for water. Replaces a worn or leaking valve to stop drips and restore normal water delivery. What it does:

• Opens and closes water flow to the icemaker and dispenser when energized
• Stops water flow when the appliance signals a fill cycle is complete
• Commonly replaced for leaks, no water to dispenser, or no water to the icemaker
• Works with the refrigerator's water supply line and wiring harness

• Turn off water supply and disconnect power before starting any repairs
• Inspect and replace any worn inlet tubing or mounting hardware as needed

This water inlet valve controls water flow to the refrigerator's dispenser and ice maker, restoring proper filling and dispensing when functioning. Designed for direct replacement to stop leaks or restore water delivery. What it does

• Opens and closes water supply lines to the dispenser and ice maker using two solenoids
• Replaces a failed valve that causes no water or reduced water to the dispenser or ice maker
• Stops intermittent leaks or continuous flow caused by a stuck or damaged valve
• Works with the refrigerator's water pressure and electronic controls to meter fills

• One water inlet valve assembly

• Turn off water supply and unplug the appliance before servicing
• Inspect inlet screen/filters and supply line for debris when replacing valve