General Electric Cooktop Parts

This glass maintop is the flat, black cooking surface that fits over an electric range's burners, restoring a smooth, easy-to-clean cooktop and improving appearance after damage or wear. What it does

• Replaces a cracked, scratched or discolored glass cooktop surface to restore safe, even support for burner components
• Provides a smooth, heat-resistant surface that helps contain spills for easier cleanup
• Supports burners and control components mounted beneath the top; helps maintain correct spacing and alignment
• Can reduce rattling or instability caused by a damaged maintop

• One glass maintop (black) as specified by the manufacturer

• High-level replacement only: requires removal of range backguard and disconnection of burner elements—refer to the range service manual for step-by-step instructions
• Disconnect power at the breaker before attempting repair to avoid electrical shock
• Handle with care; tempered glass can break if dropped or struck

This replacement main top is the outer cooktop surface for a 30" range, restoring a clean, finished appearance and proper support for burners and controls. Ideal when the top is dented, rusted, or cosmetically damaged. What it does:

• Replaces the oven/range outer top panel to cover and protect internal components
• Restores a flat, stable surface for burner elements and grates
• Helps stop drafts, heat loss, and debris entry from a damaged top
• Improves appliance appearance when the original top is scratched, dented, or corroded

• One main top (30" white) as shown

• Disconnect power (and gas if applicable) before starting any work
• Remove burner grates, elements, and control knobs as needed to access mounting screws
• Keep fasteners and touch-up paint for cosmetic match on replacement

This gas valve controls gas flow to the burners and oven, restoring reliable ignition and consistent heat when the burner won't light or the oven won't heat properly. Designed as a direct replacement part. What it does:

• Regulates gas supply to the oven and cooktop burners for proper ignition and consistent flame
• Commonly replaces valves that cause burners not to light or the oven to not maintain heat
• Helps stop irregular gas flow that can lead to weak or fluctuating flames
• Works with the appliance's safety and control systems to open and close gas flow as commanded

• One gas valve as shown

• Shut off the gas supply and disconnect power before starting any repair
• Only install on compatible appliances;
• Tighten gas fittings to the manufacturer's torque spec and test with a leak solution

This valve kit is the replacement assembly that controls fluid flow to the appliance's internal components, restoring proper operation and helping stop flow-related failures. It replaces a worn or damaged valve to return reliable performance. What it does:

• Regulates flow through the appliance so water or fluid reaches the correct component
• Re-establishes proper filling, dispensing, or flow when a valve has failed
• Stops intermittent or no-flow symptoms that can prevent normal appliance function
• Helps address leaks or drips originating at a faulty valve connection

• Disconnect power and shut off the water or fuel supply before beginning service
• Follow the appliance service manual and use OEM-compatible fittings and seals
• Inspect hoses, connectors and mounting hardware; replace any damaged parts
• After installation, restore supply, check for leaks and verify proper operation

This infinite surface burner switch controls the variable heat output for a cooktop surface element, letting the burner cycle through low-to-high heat settings for normal cooking. It restores responsive temperature control when the burner won't regulate. What it does:

• Regulates power to a surface heating element for adjustable heat from low to high
• Causes symptoms like a burner that won't heat, won't change temperature, or only works at one setting
• Replaces a failed or intermittent control that makes the knob feel loose or non-responsive
• Works with standard single-element surface heating circuits

• One infinite surface burner switch

• Disconnect power at the breaker before replacing electrical components
• Basic hand tools required; access may require removing the cooktop or burner assembly

This spud orifice is the gas flow jet that meters fuel to a griddle burner, restoring proper flame size and heat for cooking. It's a direct-replacement consumable used in gas griddle assemblies. What it does:

• Precisely meters gas to the griddle burner so the flame burns correctly for even heating
• Helps resolve weak, uneven, or absent griddle flames when the orifice is clogged or damaged
• Reduces improper combustion symptoms such as sputtering or inconsistent heat output
• Works as a replacement component in burner/griddle fuel delivery systems

• One spud orifice for griddle burner

• Turn off the gas supply and power to the appliance before beginning work
• Replace only with the matching orifice for your appliance;
• Use basic hand tools; avoid forcing fittings to prevent damage to the burner or manifold

This rear light tube assembly replaces a broken or burnt refrigerator interior lamp to restore even illumination in the rear compartment. Designed to fit the OEM lamp housing and connect to the existing socket for straightforward replacement. What it does:

• Provides rear compartment lighting so you can see food and controls clearly.
• Replaces cracked, chipped, or non-lighting tubes that cause dim or no illumination.
• Works with the factory lamp housing and wiring to restore proper light output.
• Helps resolve flickering or intermittent rear lighting when tube or filament has failed.

• One rear light tube assembly

• Disconnect power before starting any work.
• Handle glass tube carefully; wear gloves and eye protection to avoid cuts.
• Remove light cover or housing per your model's instructions to access the tube.
• Reinstall cover and restore power; test the light before finishing reassembly.

This dual radiant surface element replaces a damaged haliant-style cooktop heating element to restore even, powerful surface heating for electric ranges. Designed to match OEM fit and function for compatible cooktops. What it does:

• Heats cookware across two concentric zones for small and large pots
• Replaces a cracked, non-heating, or intermittently working surface element
• Helps fix uneven heating or elements that won't turn on
• Matches OEM electrical and mounting connections for direct replacement

• Disconnect power at the breaker before starting any repairs
• Handle the glass/ceramic element carefully to avoid cracking
• Verify connector fit and secure all wiring; do not force terminals

This oven bottom pan collects spills and supports internal components to help keep the oven cavity clean and protect internal parts from drips and debris. Heavy-duty replacement for damaged, warped, or rusted pans. What it does:

• Catches spills, drips and food debris to prevent messes from reaching internal oven components
• Provides a stable base and clearance for the bake element and other lower oven parts
• Helps reduce smoke from food drippings by containing spills for easier cleaning
• Restores proper fit and alignment when the original pan is bent, corroded, or pierced

• Disconnect power to the appliance before beginning any service
• Allow the oven to cool completely; remove racks and any loose debris before replacing the pan
• Handle edges carefully—metal edges may be sharp
• Reinstall bake element or other components per manufacturer instructions; test oven operation after reassembly

This glass maintop assembly provides the smooth cooking surface and trim for a slide-in or drop-in electric cooktop, restoring the finished top and helping contain spills for easier cleanup and safe cookware support. What it does:

• Replaces a cracked, chipped or scratched cooktop surface to restore a flat, stable cooking area
• Provides the finished glass surface that supports burners and cookware
• Helps contain spills and prevents debris from falling into the cabinet below
• Restores the top trim and mounting interface used to secure the cooktop

• Disconnect power to the range at the breaker before starting; ensure the glass is completely cool
• Handle the glass with care to avoid breakage and injury; use gloves and eye protection
• Basic removal of burners, trim screws and mounting fasteners is typically required; follow the manufacturer's service instructions

The Maintop Glass and Frame Assembly is an OEM component  designed for GE ranges. It consists of tempered glass surrounded by an insulating frame. This assembly serves as the complete cooking surface and protective barrier within the oven. 

Causes of a bad maintop glass and frame assembly can include wear and tears over time, accidental damage from being dropped or impacted, or flaws in the materials. Repeated heating and cooling cycles put stress on the glass and bonding between the glass and frame. 

Symptoms of failure include:

• Visible cracks or breaks in the glass  
• The glass becoming loose from the retaining frame
• Gaps appearing between the glass and surrounding frame
• Hot or cool spots developing on the cooking surface

This genuine OEM GE replacement is compatible with  Hotpoint, RCA and select Kenmore models.