General Electric Range Control Board

This relay board assembly is the control relay module that routes power to a refrigerator's major components. Replacing a faulty relay board restores reliable starting and power distribution for cooling and related functions. What it does

• Directs electrical power to the compressor and other major components via relays
• Replaces a failed relay board that can cause a refrigerator not to start or run intermittently
• Can stop symptoms like repeated relay clicking, no cooling, or a compressor that won't engage
• Works as the electrical switching interface between the main control and high-current components

• One relay board assembly

• Disconnect power before servicing to avoid electrical shock
• Handle the board by the edges and avoid touching contacts or components
• Verify connectors are fully seated and routed away from moving parts before restoring power

The Oven Control Board is an OEM part for GE ranges. As the central processor, it controls all cooking operations and digital interface functions.

Causes of needing replacement include moisture exposure deteriorating circuitry over time, power abnormalities damaging sensitive chips, or continuous daily cooking cycles promoting natural wear.

Symptoms requiring attention are:

• Fault codes appearing and knobs/buttons unresponsive
• Inaccurate temperature calibration or modes stuck on/off
• Clean and Convection options permanently disabled
• Bake element or broiler functioning erratically

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Reed Switch Pcb is an OEM part for GE gas ranges. This component plays a crucial role in the burner control system by detecting the on/off position of the control knobs. 

Causes of a bad reed switch pcb include circuitry failure, component degradation over time, damage from falls or impacts, or issues with the wiring connections. 

Symptoms of a bad reed switch pcb include:

• Burners not igniting when turned on  
• Ignition sparks but burners fail to light
• Unresponsive or intermittent control knob functionality
• Inability to turn burners off

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This LED power supply powers and regulates the refrigerator's LED lighting, restoring reliable interior illumination. It replaces a failed driver to stop flicker and prevent LEDs from remaining dark or dim. What it does:

• Converts appliance line voltage to the proper low-voltage DC for LED strips
• Keeps LED lights stable and prevents flickering or intermittent operation
• Restores full brightness when a failed driver causes dim or no interior lighting
• Protects LEDs from irregular voltage that can shorten lamp life

• Disconnect power to the appliance before starting any work to avoid shock.
• Handle the board and connectors carefully to avoid static or physical damage.
• Basic hand tools and access to the light housing/panel are usually required.

This right-side generator board is the replacement control board that completes the unit's ignition/control circuit, restoring proper operation and reliable starts. Use it to replace a damaged or non-responsive right-side generator board. What it does:

• Routes ignition/control signals to the right-side components and helps enable proper spark or control functions
• Common symptom: no ignition or intermittent starting on the right side
• Common symptom: erratic or no response from the affected side's controls
• Helps restore normal operation when the original board is cracked, burnt, or electrically damaged

• Disconnect power (and gas, if applicable) before starting any repair
• Handle the board by the edges and avoid static discharge; use ESD precautions if available
• Inspect connectors and wiring for heat or corrosion; replace damaged wiring or connectors

This oven control is the electronic control board that manages bake, broil, timer and user interface functions so your range responds correctly to temperature and command inputs. Replaces a failed or unresponsive control assembly to restore normal oven operation. What it does:

• Regulates oven heating cycles and user-entered temperatures via the control board
• Controls bake, broil, timer and display functions on the oven console
• Can resolve symptoms like unresponsive touchpad, blank/erratic display, or failure to start bake/broil cycles
• Works as the main interface between user commands and oven heating components

• 1 oven control electronic control board assembly

• High-level replacement; disconnect power at the breaker before servicing
• Handle board and connectors carefully to avoid static or connector damage
• Retain all mounting hardware and connectors; reference your model's service manual for exact panel removal steps

This electronic control board (Quantum) manages oven range functions and user interface features so the appliance responds correctly to cook settings and timers. It restores control panel operation and the appliance's electronic command processing. What it does:

• Serves as the main interface and logic controller for oven/range functions, including bake/broil and timer/clock control
• Processes user commands from the touchpad or selector and sends signals to heating elements, relays, and sensors
• Can fix symptoms such as no display or unresponsive control panel, oven not starting, or erratic cycle behavior
• Works with the oven's sensor and power components to regulate cooking operations

• 1 electronic control board (Quantum) as pictured

• Disconnect power to the appliance before beginning any service to avoid shock or damage
• Handle the board by the edges and avoid static discharge; use proper ESD precautions
• Verify connectors and wiring match before connecting and secure all harnesses firmly
• After installation, restore power and confirm all functions and displays operate correctly

This replacement 27" oven timer controls the oven clock, timer and clean functions so your range can accurately time cooking cycles and complete self-clean cycles. Restores timed baking, countdown and oven clean control. What it does:

• Replaces the oven's timer/clock control used for setting cook time and monitoring countdowns
• Manages self-clean cycle initiation and timing for compatible 27" ovens
• Restores visible clock and timer display when original control is blank or unresponsive
• Helps address symptoms like oven not starting timed cycles, timer not counting down, or clean cycle failing to initiate

• Disconnect power to the range at the breaker before beginning service.
• Handle the control assembly carefully to avoid damage to the display and connectors.
• Use basic hand tools.

This thermostat control regulates oven temperature to help maintain consistent cooking heat and safe operation. It replaces a failed TO8 temperature control to restore normal bake/hold functions. What it does:

• Senses and regulates oven temperature to keep cooking cycles near set temperature
• Can stop heating or cause temperature swings when the original control fails
• Commonly replaced when oven won't heat, overheats, or cycles on and off erratically
• Works as the temperature-sensing/control component for the oven control system

• One thermostat control (TO8) as shown

• Disconnect power to the appliance before starting any repair to avoid shock
• Handle the control and its terminals carefully to avoid bending or breaking connections
• After installation, verify oven operation and temperature with an oven thermometer

This electronic range control is the oven's main user interface and control board, managing oven functions, timers and the display so your range responds correctly to cook settings and timers. What it does:

• Controls bake, broil, self-clean and timer functions via the front control panel
• Manages oven temperature setpoints and communicates with temperature sensors
• Powers and updates the digital display and clock/timer readouts
• Enables user inputs from the touchpad or selector knobs to activate cooking cycles
• Common symptom linkage: blank or unresponsive display, nonworking touchpad, oven not heating or not following set temperature

• Disconnect power at the breaker before attempting any service to avoid shock
• Handle the board and connector pins carefully to prevent ESD or damage
• Verify wiring connections and sensor continuity per OEM schematic during replacement

This electronic range control replaces the oven control board and user interface to restore clock, timer, and oven function. It manages oven bake/broil cycles and the front control display for accurate temperature control. What it does:

• Controls oven bake and broil cycles and displays clock/timer functions
• Manages user inputs from the touchpad/console for mode and temperature selection
• Commonly used when the display is blank, timer/clock won't set, or oven won't heat properly
• Interfaces with temperature sensors and power relays to regulate oven operation

• Disconnect power to the range at the breaker before beginning any work
• Handle the control and glass/display carefully to avoid damage; protect surfaces from scratches
• Verify connector seating and mounting screws; ensure ribbon cable is fully engaged