General Electric Range / Cooktop / Oven Glass Top Or Cook Top

This is the main top.

Color: Black

This part is a glass range top assembly. This part can be used to replace a broken or defective glass range top in a variety of range models. The range top is critical for proper equipment functionality as it both houses the burners and provides a safe, stable surface to support cookware. If the current range top is cracked, broken, or faulty in any way, it should be immediately replaced. Always disconnect power from the appliance before starting any work or repairs. It is recommended that work gloves are worn to protect the hands.This is a genuine OEM part made by GE and has been sourced directly from the manufacturer. As an authentic replacement part, this glass range top is suitable for use on ranges that have been manufactured by General Electric, Hotpoint, RCA, and some other brands.

This main top is the black outer surface that covers the appliance's cooktop area, providing a finished appearance and a stable mounting surface for burners and controls. It restores the top panel's look and function. What it does:

• Replaces a damaged, dented or scratched cooktop top to restore proper fit and appearance
• Provides the mounting surface for burner bowls, grates and control components
• Helps maintain proper spacing and alignment of cooktop elements for safe operation
• Addresses symptoms like visible damage, warped surface or loose mounting points

• 1 main top assembly (black) as shown

• Disconnect power before beginning any repair; ensure range is fully cool and unplugged or breaker is off
• Some models require removing grates, burners and control panel to access mounting screws—handle edges carefully to avoid cuts
• Use proper fasteners and torque per service instructions;

This replacement main top is the outer cooktop surface for a 30" range, restoring a clean, finished appearance and proper support for burners and controls. Ideal when the top is dented, rusted, or cosmetically damaged. What it does:

• Replaces the oven/range outer top panel to cover and protect internal components
• Restores a flat, stable surface for burner elements and grates
• Helps stop drafts, heat loss, and debris entry from a damaged top
• Improves appliance appearance when the original top is scratched, dented, or corroded

• One main top (30" white) as shown

• Disconnect power (and gas if applicable) before starting any work
• Remove burner grates, elements, and control knobs as needed to access mounting screws
• Keep fasteners and touch-up paint for cosmetic match on replacement

This oven bottom pan collects spills and supports internal components to help keep the oven cavity clean and protect internal parts from drips and debris. Heavy-duty replacement for damaged, warped, or rusted pans. What it does:

• Catches spills, drips and food debris to prevent messes from reaching internal oven components
• Provides a stable base and clearance for the bake element and other lower oven parts
• Helps reduce smoke from food drippings by containing spills for easier cleaning
• Restores proper fit and alignment when the original pan is bent, corroded, or pierced

• Disconnect power to the appliance before beginning any service
• Allow the oven to cool completely; remove racks and any loose debris before replacing the pan
• Handle edges carefully—metal edges may be sharp
• Reinstall bake element or other components per manufacturer instructions; test oven operation after reassembly

This glass maintop assembly provides the smooth cooking surface and trim for a slide-in or drop-in electric cooktop, restoring the finished top and helping contain spills for easier cleanup and safe cookware support. What it does:

• Replaces a cracked, chipped or scratched cooktop surface to restore a flat, stable cooking area
• Provides the finished glass surface that supports burners and cookware
• Helps contain spills and prevents debris from falling into the cabinet below
• Restores the top trim and mounting interface used to secure the cooktop

• Disconnect power to the range at the breaker before starting; ensure the glass is completely cool
• Handle the glass with care to avoid breakage and injury; use gloves and eye protection
• Basic removal of burners, trim screws and mounting fasteners is typically required; follow the manufacturer's service instructions

The Maintop Glass and Frame Assembly is an OEM component  designed for GE ranges. It consists of tempered glass surrounded by an insulating frame. This assembly serves as the complete cooking surface and protective barrier within the oven. 

Causes of a bad maintop glass and frame assembly can include wear and tears over time, accidental damage from being dropped or impacted, or flaws in the materials. Repeated heating and cooling cycles put stress on the glass and bonding between the glass and frame. 

Symptoms of failure include:

• Visible cracks or breaks in the glass  
• The glass becoming loose from the retaining frame
• Gaps appearing between the glass and surrounding frame
• Hot or cool spots developing on the cooking surface

This genuine OEM GE replacement is compatible with  Hotpoint, RCA and select Kenmore models.

This is a replacement range top designed to restore the cooking surface on compatible GE ranges. It provides a solid, correctly sized surface so burners and grates mount securely and cookware sits level. What it does:

• Replaces a worn, dented, cracked, or rusted range top to restore proper burner/grate alignment
• Provides the correct mounting surface for cooktop elements and grates
• Helps stop drafts or uneven cooking caused by a warped or damaged top
• Restores the appliance's appearance when the original top is scratched or discolored

• Disconnect electrical power (and gas if applicable) before beginning service
• Handle carefully; edges may be sharp—wear gloves and eye protection
• Follow the appliance's service manual for disassembly, reassembly, and torque specifications

This 24-inch range top replaces a damaged or worn cooktop surface to restore a clean, stable cooking area and proper burner seating. It provides the finished surface that supports burners and cookware for safe cooking. What it does:

• Replaces a cracked, dented or corroded cooktop surface that can affect burner fit and stability
• Restores a level, secure mounting area for burners, grates and burner caps
• Helps prevent heat loss and uneven cooking caused by warped or damaged tops
• Improves appearance by covering stains, rust or other visible damage

• Disconnect power and shut off gas supply before starting work; follow all safety precautions
• Remove grates, burner caps and associated components to access and remove the old top
• Transfer burners, igniters and seals as required per the manufacturer's instructions