General Electric Range / Cooktop / Oven Igniter

Best Seller

Genuine Ge part

Ge Oven Bake Igniter

By: Ge

Part Number: WB13K21

The Oven Igniter is an OEM replacement part for GE ovens, designed to ignite the bake igniter to start the heating process. This part is responsible for creating the spark that ignites the gas, providing the heat needed to cook and bake food. Over time, the oven igniter can wear out or become damaged, which can prevent the oven from heating.

Symptoms of a bad Oven Igniter include:

The oven not heating up at all.
The oven taking longer than normal to heat.
Gas smell in the oven due to gas being released without ignition.
A clicking sound without the oven igniting.

Causes of a bad igniter can include normal wear and tear over time, exposure to excessive heat or moisture, or physical damage from impact or mishandling.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

IMPORTANT: The connector plug may need to be cut off and igniter wires connected to range wires using porcelain wire connectors.

This part fixes the following symptoms

Little to no heat when broiling
Little to no heat when baking
Gas igniter glows, but will not light
Won't start

Do-It-Yourself Stories from Customers like You Oven burner would not light broiler burner would light Michael C. • Austin , TX • January 25, 2015

If the oven burner would not light but the broiler would this indicated that the safety valve is OK. Problem had to be with the igniter. Removed the bottom panel in the oven and restarted the oven. The igniter would not glow at all. It should be brilliant red. This is where the problem came in. I could not find the location of the model on the Kenmore range anywhere you would normally look - the back, the wiring envelope, the oven door jamb etc. Also the igniter cannot be removed from... Read more

$55.77

Compare At:: $98.14
You Save:: $42.37

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Ge Round Style Oven Or Broiler Igniter

4.8 (495)

By: Ge

Part Number: WB2X9154

The Round Style Oven or Broiler Igniter is an OEM replacement part for GE gas ranges and cooktops. It has a round design and is responsible for reliably igniting the gas burners with each use. Range: 2.5 to 3.0 amps.

Causes of a bad igniter can include wear and tear from repeated heating and cooling cycles, damage or defects in the electrical components, or issues arising from long-term exposure to high heat.

Symptoms of a bad igniter include:

Difficulty starting or unreliable ignition of gas burners
Burners failing to ignite with the press of the control knob
Intermittent ignition problems
Clicking sounds but no ignition

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms

Little to no heat when broiling
Little to no heat when baking
Won't start
Gas igniter glows, but will not light

Do-It-Yourself Stories from Customers like You Bake oven would not heat up no glow from bottom oven igniter top oven broiler heats Vicente T. • Fort Wayne , IN • February 19, 2016

There are two igniters in oven, one for top broiler and one for bake oven at bottom. Your website help me troubleshoot the problem and locate the part. ordered part was delivered the next day. Following the instructions that others on your website had provided, the repair was quick and SUCCESSFUL. No need to pull out oven as power cord can be accessed from removing bottom storage drawer. Step 1: Remove the storage drawer from below the oven and disconnect the power cord from inside. No need... Read more

$95.75

Compare At:: $118.55
You Save:: $22.80

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Ge Oven Igniter Assembly

4.8 (124)

By: Ge

Part Number: WB13T10045

The Oven Igniter Assembly is an OEM part for GE ovens. This assembly is responsible for igniting the gas to provide heat for cooking. It ensures the oven reaches and maintains the set temperature by igniting the gas burner whenever the oven is in use.

You should replace the oven igniter assembly if it becomes faulty. Causes of a bad igniter include wear and tear over time, electrical failures, or damage from excessive heat exposure. A malfunctioning igniter can prevent the oven from heating properly, leading to uneven cooking or failure to reach the desired temperature.

Symptoms of a bad Oven Igniter Assembly include:

The oven not heating up
The igniter not glowing or sparking
Uneven cooking or baking results
The smell of gas without ignition

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Gas igniter glows, but will not light
Won't start

Do-It-Yourself Stories from Customers like You Igniter in my ge oven lasts about 1 year Robert W. • Washington , DC • October 24, 2014

After 5 igniter replacements, I've gotten pretty good at this. Less than 30 minutes start to finish -- including mopping under the range, etc. You need one hex driver for the whole job -- 3/8" I believe. 1. Remove all of the racks and the oven door. Remove the bottom panel inside the oven. Now unscrew the flame cover (4 hex screws), remove, and unscrew the old igniter (2 hex screws). 2. Pull the oven away from the wall. Be careful not to kink the gas line. Unplug the range. Remove... Read more

$117.95

Compare At:: $140.36
You Save:: $22.41

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Ge Igniter Glowbar

5.0 (3)

By: Ge

Part Number: WB13X25264

The Igniter Glowbar is an OEM part for GE ovens. This component is essential for igniting the gas in the oven burner, producing the heat required for cooking and baking. The glowbar heats up to a high temperature, igniting the gas and ensuring efficient and reliable oven operation.

Causes of a bad igniter glowbar can include wear and tear from regular use, electrical faults, or damage from high temperatures over time. A worn or damaged igniter may fail to reach the necessary temperature to ignite the gas.

Symptoms of a bad igniter glowbar include:

The oven not heating up
Delayed ignition or the oven taking longer to preheat
A weak or no glow from the igniter
The smell of gas without ignition

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You My ge mongram oven did not heat James M. • Manalapan , NJ • October 31, 2016

From YouTube videos I was sure the issue was a blown igniter. There were numerous examples of how to replace the igniter on YouTube and the repair was pretty easy. Getting at the igniter was a bit awkward and I had to disconnect gas to get access to back of oven but the whole process only took 20-25 minutes. Read more

$80.95

Compare At:: $96.33
You Save:: $15.38

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Ge Electrode

4.9 (18)

By: Ge

Part Number: WB13K18

The Electrode is an OEM part for GE gas cooktops and ranges. This component is responsible for igniting the surface burners. They are also often referred to as spark igniters.

Causes of a bad electrode can include cracks, mineral deposits, or damage accumulated from regular usage over many heating cycles. Heat exposure degrades the material integrity of the tip.

Symptoms of a bad electrode include:

Surface burners failing to light or ignite when turned on
The igniter glows but flames do not ignite
Intermittent or inconsistent ignition of burners
Visible wear, cracks or corrosion on the electrode tip

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Stovetop kept clicking but no flame Jeffrey W. • Kendall Park , NJ • June 12, 2014

Did some research to find out it was the electrode. Pulled out the old one to match what was on your site. It came in no time at all, and the replacement was a cinch. Read more

$39.95

Compare At:: $47.54
You Save:: $7.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Ge Igniter Glowbar

5.0 (5)

By: Ge

Part Number: WB13X25261

This is a replacement igniter glowbar. This is a genuine OEM part made by General Electric and has been sourced directly from the manufacturer. This part is intended to replace defective or burnt-out igniter glowbars in a variety of gas powered oven and stove models. A glowbar igniter works to electrically ignite the gas source on a stove or range. A defective glowbar will prevent the burner from lighting and emitting a flame. Always make sure that the stove is entirely disconnected from power and gas before starting any repair work. Proper tools are required to replace this part. Please ensure the appropriate safety precautions are followed when attempting to fix any appliances. For more accurate information on how and where to install this igniter glowbar, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this igniter glowbar is suitable for use on several different models of gas-powered ovens, stoves, and ranges manufactured by General Electric and Hotpoint. This is a genuine part made of high-quality, durable materials and is sold individually.

Do-It-Yourself Stories from Customers like You Oven not heating up fast Susan I. • Altadena , CA • August 13, 2016

Replaced the igniter Read more

$72.95

Compare At:: $86.81
You Save:: $13.86

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Ge Spark Electrode

4.5 (6)

By: Ge

Part Number: WB13T10065

The Electrode Top is an OEM part for GE gas ranges. It is designed to produce the spark necessary to ignite the gas burner, ensuring the burner lights up quickly and efficiently.

You should replace the electrode top if it becomes worn out, damaged, or fails to produce a spark. Common causes of a bad electrode top include buildup of food debris, exposure to moisture, or physical damage to the electrode or its connections.

Symptoms of a bad Electrode Top include:

The burner not igniting or taking a long time to ignite
A weak or absent spark
Clicking sounds without ignition

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Stove wouldn't spark Steven L. • Olympia , WA • December 17, 2014

Replaced spark module and all electrodes/igniters. Read more

$24.95

Compare At:: $29.69
You Save:: $4.74

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Ge Oven Igniter (Glow Bar)

By: Ge

Part Number: WB13K10030

This oven igniter lights the gas for the oven burner so your range can preheat and maintain temperature. Replacing a weak or failed igniter restores reliable ignition and consistent oven heating performance.

Heats to draw open the gas safety valve and ignite the oven burner
Helps fix: oven not heating or failing to reach temperature
Igniter glows but burner won't light, or takes a long time to light
Intermittent oven heat or frequent preheat failures

Includes: 1 igniter assembly

Disconnect power and shut off gas before servicing
Handle the ceramic igniter carefully; avoid touching or stressing the heating element
Transfer any required mounting hardware from the original and route wires away from hot surfaces
After installation, restore power and gas and verify the burner lights and the flame is steady

$120.95

Compare At:: $142.72
You Save:: $21.77

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Ge Top Burner Igniter

5.0 (1)

By: Ge

Part Number: WB13T10077

The Top Burner Igniter is an OEM part for GE gas ranges. This igniter is responsible for lighting the gas burner on the cooktop, providing the necessary spark to ignite the gas and start the burner.

Causes of a bad igniter can include wear and tear from regular use, buildup of food debris or grease, or electrical issues.

Symptoms of a bad top burner igniter include:

The burner not lighting or taking a long time to ignite
No clicking sound when attempting to ignite the burner
Weak or no spark produced by the igniter
The igniter glowing but not igniting the gas

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Gas range burner would not light. Arthur Z. • Marietta , GA • May 04, 2021

The igniter was sparking, but the spark did not appear as bright as the other burners. Swapped the burner and lid since that is where contact is made. Did not help. Came to the conclusion it was a faulty igniter. I ordered parts, replaced the igniter and now the range burner works fine. Read more

$23.95

Compare At:: $28.50
You Save:: $4.55

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Ge Flat Style Oven Igniter

4.7 (21)

By: Ge

Part Number: WB2X9998

By GE. Length - 3.72". Replaces any flat oven igniter (excluding blue ceramic igniters).

This part fixes the following symptoms

Little to no heat when baking
Won't start
Gas igniter glows, but will not light

Do-It-Yourself Stories from Customers like You Oven not lighting on bake Sandy S. • South Windsor , CT • March 23, 2014

I put in a new igniter. Very simple Read more

$42.57

Compare At:: $58.35
You Save:: $15.78

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Ge Igniter (Spark Electrode)

5.0 (6)

By: Ge

Part Number: WB13T10001

This spark igniter creates the arc that lights the gas burner, restoring quick, reliable ignition in your range or oven. Replacing a worn electrode helps eliminate hard starts, intermittent lighting, and nonstop clicking.

Generates a high-voltage spark at the burner to ignite gas
Helps resolve burner won't light, delayed ignition, or intermittent sparking
Can reduce continuous clicking caused by a weak, damaged, or mispositioned electrode
Typical signs include no visible spark or a cracked ceramic insulator

What's included: 1 spark igniter electrode

Disconnect power and shut off gas; allow the appliance to cool before service
Handle the ceramic insulator carefully; avoid bending or striking the electrode tip
Position the tip near the burner port; ensure a solid ground and secure bracket
Reconnect the lead firmly, then test for a strong spark before reassembly

Do-It-Yourself Stories from Customers like You Stove would not light but broil and the top burners worked Joel G. • Sidney , IL • August 31, 2015

You guys saved me 1600+ Dollars!! After some research and testing I found the igniter for my stove was not working. The top burners worked, and the oven worked on broil. After watching the video on your website, I took lower pan and flame spreader out. I then turned on the stove and saw that the igniter was not glowing. I put in the model number for my stove on your website, and ordered a replacement igniter. In 2 days I received the igniter. It Installed with basic hand tools in about 15... Read more

$92.37

Compare At:: $109.00
You Save:: $16.63

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Ge Spark Igniter Assembly

5.0 (2)

By: Ge

Part Number: WB02X10822

This igniter assembly creates the spark that lights a gas burner, helping restore quick, reliable ignition. Replacing a damaged or shorted igniter can address burners that won't light, intermittent ignition, or repeated clicking without flame.

Generates a high-voltage spark at the burner to ignite gas
Ceramic-insulated electrode focuses the spark for consistent lighting
Failure can cause no spark at a specific burner, delayed ignition, or constant clicking
Visible cracks, carbon tracking, or damaged lead are common replacement indicators

What's included: One igniter assembly Install notes:

Disconnect power and shut off gas before servicing
Allow the appliance to cool; handle the ceramic insulator carefully to avoid breakage
Route the lead away from heat and moisture; secure connections firmly
Align the electrode tip correctly with the burner for reliable ignition

Do-It-Yourself Stories from Customers like You No spark at any burner Juan Carlos E. • Charlotte , NC • January 26, 2019

I checked the transformer and did not get outlet voltage. The big problem was to release the cooktop cover. The central jet holder broke and was almost impossible to release the cover. In the process was necessary to damage the main tube, the long range nut with chamfer, and the nut. After that I ordered all the pieces to IPS parts because there were 30% cheaper than partspro. IPS people keep saying to me after a lot of arguments that the order will be delivered the next week. After one and a... Read more

$97.50

Compare At:: $115.05
You Save:: $17.55

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Ge Oven Igniter (Glowbar)

By: Ge

Part Number: WB13K10024

Restore reliable lighting and heat in your gas oven with this glowbar igniter. When energized, it heats up to ignite the oven burner, eliminating no-heat and slow-preheat issues caused by a weak or failed igniter.

Heats and glows to ignite the oven's gas burner
Can glow without lighting the burner, or fail to glow at all
May cause long preheat times or intermittent heating

What's included: One glowbar igniter Install notes:

Disconnect electrical power and shut off the gas supply before servicing
Allow the oven to cool completely; handle the igniter carefully and avoid touching the element
Secure wiring and connectors away from hot surfaces; ensure solid connections
Restore gas and power, then test for prompt, consistent ignition

$177.33

Compare At:: $212.80
You Save:: $35.47

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Ge Top Burner Ignitor (Surface Burner Spark Electrode)

5.0 (2)

By: Ge

Part Number: WB02X10972

This replacement top burner ignitor produces the spark needed to light gas on surface cooktops, restoring reliable ignition so burners light consistently. Ideal for repair of a single surface burner assembly. What it does:

Generates the spark that ignites gas at a surface/top burner
Replaces a cracked, broken, or non-sparking electrode
Helps correct symptoms such as continuous clicking with no ignition, burners that won't light, or intermittent sparking
Works as the electrode/ignition source mounted next to the burner cap

What's included: One top burner ignitor (single spark electrode) Install notes:

Always disconnect power to the range and turn off the gas supply before servicing
Handle the ceramic/porcelain insulator and electrode tip carefully to avoid damage
Use basic hand tools;

Do-It-Yourself Stories from Customers like You Ignitor on gas range Ronald C. • Oakland , TN • August 27, 2016

Replaced it Read more

$103.95

Compare At:: $123.70
You Save:: $19.75

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Ge Electrode As

By: Ge

Part Number: WB2X8598

$96.95

Compare At:: $115.05
You Save:: $18.10

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Ge Ignitor, Surface

By: Ge

Part Number: WB29K27

This is an electrode only. The burner base is no longer available. Re-use existing base and replace electrode only.

$82.38

Compare At:: $97.21
You Save:: $14.83

IN STOCK

Ships Today Guaranteed

Add to Cart

General Electric range/cooktop/oven igniter replacement parts play a crucial role in keeping your kitchen appliance in top working condition. Whether you love to bake, broil, or simmer a delicious stew, these igniters are vital for ensuring your food is cooked efficiently and evenly. Without a functioning igniter, your General Electric range, cooktop, or oven won't be able to generate the necessary heat to prepare your meals perfectly.

The igniter is essentially the heart of your appliance's heating mechanism. These General Electric parts are designed to ignite the gas that fuels your burners, making it possible to reach the desired cooking temperatures. It's important to use OEM General Electric igniter replacement parts to ensure the best quality and compatibility with your appliance. OEM parts are crafted specifically for your model, providing peace of mind that they will fit and function just as the original parts.

So, if you find yourself needing General Electric range/cooktop/oven igniter replacement parts, know that you can rely on their availability and quality to restore your appliance's performance seamlessly. With the right parts, you'll be back to creating delicious meals with confidence in no time.

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

General Electric Range / Cooktop / Oven Igniter

Ge Oven Bake Igniter

Ge Round Style Oven Or Broiler Igniter

Ge Oven Igniter Assembly

Ge Igniter Glowbar

Ge Electrode

Ge Igniter Glowbar

Ge Spark Electrode

Ge Oven Igniter (Glow Bar)

Ge Top Burner Igniter

Ge Flat Style Oven Igniter

Ge Igniter (Spark Electrode)

Ge Spark Igniter Assembly

Ge Oven Igniter (Glowbar)

Ge Top Burner Ignitor (Surface Burner Spark Electrode)

Ge Electrode As

Ge Ignitor, Surface