General Electric Range / Cooktop / Oven Grate, Grate Feet, Griddle

This cast-iron cooktop grate replaces a damaged or worn grate to restore stable support for cookware and even heat distribution across burners. Fits as a direct replacement designed for easy swap-out and normal stovetop use. What it does

• Provides a stable, heat-resistant surface for pots and pans so cookware sits level while cooking
• Replaces cracked, warped, or missing grates that can cause pans to wobble or fire to unevenly heat
• Resists high temperatures and everyday wear found on gas range cooktops
• Helps protect the cooktop surface from spills and direct flame contact

• One cooktop grate assembly

• Ensure the cooktop and burners are completely cool and gas/electric supply is off before replacing
• Lift out the old grate and set the new grate into place—no special tools typically required
• Handle cast-iron grate carefully; it is heavy and can chip porcelain/enamel if dropped
• Clean surrounding cooktop surface before installation to ensure a flat seating surface

This right-side cooktop grate assembly provides a stable cooking surface for compatible gas ranges, restoring proper pot and pan support and even heat distribution. Durable cast construction withstands normal stovetop use. What it does:

• Supports cookware over the right burner so pots and pans sit level and stable
• Replaces cracked, warped or chipped grates that can cause wobbling or unsafe pots
• Maintains correct cookware clearance for efficient flame contact and consistent heating
• Helps protect the cooktop surface from spills and direct flame contact

• One right-side cooktop grate assembly

• Allow the cooktop to fully cool and turn off gas before removing or installing the grate
• Lift the old grate straight up to remove; set the new grate in place, aligning it with adjacent grates and burner components
• Ensure burner caps are seated properly and test burners on low heat after installation
• If the grate does not seat securely, verify you have the correct side-specific grate for your cooktop model

Center

This OEM replacement part is a grate burner for stoves. The grate burner is the black metal frame that is used to support pots and pans for cooking. If the grate burner is damaged to the point of no longer being operable, it will need to be replaced. To replace the grate burner, simply pull out the old grate by lifting it up from the stove. Once removed, set it to the side. Take the new grate burner and place it directly on top of the stove in its correct position. Make sure it is set securely. This genuine replacement part is sold individually and is sourced directly from the manufacturer. It is compatible with General Electric, Hotpoint, and RCA brand appliances.

A cast cooktop grate that supports pots and pans over a burner and restores a stable cooking surface. Replaces a worn, cracked, or missing grate so cookware sits level for safer, more consistent stovetop use. What it does:

• Supports cookware above the burner for stable heating and safer cooking
• Replaces cracked, broken, or warped grates that let pots wobble or slide
• Restores proper spacing for burner caps and cookware contact
• Durable cast construction resists heat and everyday wear

• Always turn off burners and allow the cooktop to cool completely before handling
• Remove the old grate and set the replacement grate in place, aligning feet over the burner ports
• No special tools typically required; inspect for proper seating and any cracked pieces before use
• Clean grease and debris from the cooktop surface before reinstalling to ensure a stable fit

Color: Black.

Color: Black. Double burner grate. Right hand side. Includes the rubber feet.

Double. Left hand side

This cast iron cooktop grate supports cookware over the left-front burner and restores a level, stable cooking surface. Durable cast construction resists high heat and helps keep pots and pans steady while cooking. What it does:

• Provides a stable, heat-resistant surface for cookware on the left-front burner
• Replaces cracked, chipped, warped or missing grates that cause pots to wobble
• Helps maintain correct clearance and airflow around the burner for consistent heating
• Restores safe, even support for pans so cooking performance is predictable

• Allow the cooktop to fully cool before removing or installing the grate
• This is a simple drop-in replacement — no special tools required
• Inspect surrounding burner components for damage or heavy residue and clean before installing
• If burners still perform poorly after replacing the grate, check burner caps/heads and electrical/gas supply per manufacturer guidance

A left-front cast iron cooktop grate that supports cookware over the burner and restores stable, level cooking. Durable cast construction resists heat and holds pots securely for everyday stovetop use. What it does

• Replaces a damaged, cracked, or missing left-front cast grate so pans sit level over the burner
• Provides a stable cooking surface to help prevent cookware from rocking or slipping
• Maintains proper spacing from the burner for even flame contact and safe use
• Restores the aesthetic, functional appearance of the cooktop

• One left-front cast iron cooktop grate

• Allow the cooktop to cool completely before removing or installing the grate
• Lift straight up to remove; set replacement grate into position so it seats securely on the cooktop supports
• Handle with care—cast grates are heavy and can chip if dropped
• Clean with non-abrasive cleaners and avoid thermal shock (don't immerse a hot grate in cold water)

This cooktop grate assembly replaces a damaged or missing grate to restore a stable cooking surface and properly position cookware over the burner. Designed for use on compatible GE gas ranges, it helps ensure even support and safe stovetop use. What it does:

• Provides a stable platform for pots and pans so cookware sits level over the burner
• Keeps cookware centered for consistent heat distribution and safer cooking
• Replaces cracked, warped, or missing grates that can cause wobbling or instability
• Helps protect the cooktop surface and burner components from direct contact with heavy cookware

• Allow the cooktop to cool completely before handling or replacing the grate
• Remove any loose debris and seat the grate fully on the cooktop supports to ensure stability
• No special tools are typically required; handle carefully to avoid chipping or scratching the finish

This gray cooktop grate assembly replaces a damaged or worn grate to restore stable cookware support and proper burner access. It matches OEM fit and finish for a seamless look on compatible gas ranges and cooktops. What it does:

• Supports pots and pans above the burner for even heating and safe cooking
• Centers cookware for stable cooking and improved flame contact
• Replaces cracked, chipped, warped or excessively worn grates that cause rocking
• Helps prevent cookware from scratching the cooktop surface when properly installed

• One gray grate assembly

• Ensure all burners are off and the cooktop is cool before removing or installing the grate
• Lift the old grate straight up to remove; set the new grate into place so it sits flat and engages locating features
• Handle with care — grates can be heavy and have sharp edges; use gloves if needed