General Electric Range / Cooktop / Oven Gas Conv Kit Parts

Natural gas orifice spud.

This LP conversion kit adapts your compatible gas appliance from natural gas to liquid propane. It provides model-specific components to size the fuel delivery for LP, helping ensure proper flame characteristics and consistent heating performance. What it does:

• Converts the appliance for use with LP (propane) fuel
• Configures orifice sizing and regulator settings for LP on compatible models
• Helps correct oversized yellow flames, weak heat, or sooting when operating on propane without proper conversion
• Commonly needed when relocating to a home with propane service

• One LP conversion kit

• Disconnect electrical power and shut off the gas supply; allow the appliance to cool before starting.
• Follow the model-specific conversion procedure to change orifice spuds and convert the pressure regulator; perform a leak check and verify flame appearance.
• After conversion, test all burners and the oven for proper operation across settings.

This LP orifice spud directs propane gas to a burner for correct flame size and stable cooking heat. It's the specific replacement used in LP-configured gas cooktop/oven burners to restore proper gas flow. What it does:

• Meters propane flow to a burner for consistent flame performance.
• Used in LP (propane) conversions or LP-configured burners.
• Common symptoms it can fix: burner won't light, weak or uneven flame, or poor heat control.
• Fits into the burner valve/manifold assembly and works with the burner head.

• Turn off the gas supply and disconnect power to the appliance before servicing.
• Use correct LP conversion instructions for your appliance and replace only with the specified orifice for LP.
• Hand-start threads, then snug with the appropriate wrench; avoid over-tightening.

Natural gas

A replacement conversion kit assembly used to change a compatible gas appliance from one fuel type to another, restoring correct burner operation and safe performance when a fuel-type change is required. What it does:

• Converts appliance fuel type (e.g., natural gas ? LP) so burners operate with the proper orifice and pressure settings
• Helps restore correct flame size, ignition reliability, and consistent heat output after conversion
• Addresses symptoms such as weak or uneven flames, burners that won't light reliably, or improper combustion characteristics after changing fuel
• Works as the service kit component needed for certified fuel-type conversions when installed per OEM instructions

• Turn off gas supply and electrical power before beginning work; follow all local codes and safety procedures
• Installation should follow the OEM instructions included with the kit
• After installation, check for proper flame characteristics and leak-test gas connections per local regulations

Location: Left front.

Natural gas

This LP conversion kit converts a compatible gas range or oven from natural gas to liquid propane so burners and the oven operate safely on LP fuel. It supplies the metering parts needed to change a range to the correct smaller orifice sizes for propane. What it does

• Replaces factory natural-gas orifices with LP-sized orifices so burners and oven jets meter propane correctly
• Helps restore proper combustion to reduce smoking, poor flame or low heat when using LP
• Includes conversion label to identify the appliance fuel type after conversion
• Intended for use only on compatible models; do not attempt conversion without instructions

• LP orifice(s), conversion label and conversion instructions/parts as shown on the product listing

• Conversion must follow the appliance manufacturer's instructions exactly; improper conversion can cause unsafe operation
• Turn off gas and electrical power to the appliance before starting work
• After conversion, test for leaks and verify proper burner and oven performance per OEM guidance

Natural gas

18K

This gas conversion kit provides the parts needed to convert a compatible gas range between fuel types so the appliance can operate safely after a fuel change. It's a simple replacement kit for restoring proper burner operation. What it does:

• Supplies the necessary conversion components to change a range's gas configuration
• Helps ensure correct gas flow and burner ignition after conversion
• Addresses issues caused by using the wrong fuel type, such as poor burner performance or difficulty lighting
• Works as part of a proper conversion process performed to match the appliance to the household gas supply

• Installation should follow the appliance OEM conversion instructions exactly.
• Turn off the gas supply and disconnect power before beginning work.
• After conversion, check all fittings for leaks and test burners for correct operation.

Liquid propane

This oven pilot assembly supplies the small, continuous flame used to ignite the main gas burner in a gas oven. It restores reliable ignition so the broil/bake burners can light when the oven calls for heat. What it does:

• Provides the standing pilot flame that ignites the oven's main burner
• Allows safe ignition when the oven control sends gas to the burner
• Common repair for ovens that fail to light or have intermittent ignition
• Can reduce repeated clicking or delayed lighting when replaced

• One oven pilot assembly

• Turn off gas supply and disconnect electrical power before starting any work
• Verify proper alignment and secure mounting of the pilot tip to the burner hood
• After installation, check for gas leaks with a leak-detection solution and confirm proper ignition

Location: Left rear.

Natural gas. Main burner.

Natural gas. LG 1.68mm