Hedge Trimmer Parts

This cutter blade is a genuine Echo replacement part that fits various models of hedge trimmers. Cutter blades on hedge trimmers are used to prune hedges, bushes, and shrubs and to shape and manicure overgrown grass. Regular maintenance of these cutter blades is crucial to preserving the functionality of hedge trimmers.If the cutter blades have not been cleaned, sharpened, and lubricated after regular usage of the hedge trimmers, they might be subject to damage. If there is a noticeable decrease in the ability of the cutter blades to trim and prune, the cutter blades might need to be individually replaced. If there is a strange sensation occurring while using the hedge trimmers, such as a vibration coming from the equipment, this might be a result of overused, improperly cleaned, or overaged cutter blades. The appliance should not be used again until the cutter blades have been individually replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment such as hedge trimmers. This blade is compatible with the following brands: Echo and Shindaiwa. This part sold individually.

This chainsaw fuel cap assembly is made from high-quality plastic. Durable threads keep this chainsaw fuel cap assembly working for years of use. You place one end in the fuel tank while the screw cap covers the nozzle. This keeps your gas from spilling out and causing possible damage or injury. You can’t cut down a tree or slice up some firewood with gas leaking everywhere. This also leads to harming the environment around you. Chainsaws fuel caps can swell. The rubber seals may leak after a certain amount of use. The cord attaching the cap to the insert may break, allowing the cap to be lost. Replacing the chainsaw fuel cap assembly can correct these problems. Pliers or a wrench may be needed to remove the old fuel cap assembly. This genuine OEM chainsaw fuel cap assembly was manufactured for use with Craftsman chainsaws. It is also compatible with Poulan and Poulan Pro chainsaws.

This genuine carburetor repair kit is designed for use in select trimmer engines. The carburetor is responsible for combining the gas and air mixture that will go into the engine. Fuel and air flow into the carburetor through filters to remove any potential debris or particulates. Then, they are passed through a series of tubes and diaphragms and mixed together in the inner tube before being released into the engine through a butterfly valve. Over time, the high heat and constant pressure can damage the gaskets, diaphragms, and other parts of the carburetor. It may be necessary to replace everything with this carburetor repair kit that includes multiple components. This genuine OEM carb kit is compatible with select lawn and garden trimmers from Craftsman, Poulan, Weed Eater, and Jonsered. There are more than 50 compatible models available that can use this kit. This carburetor repair kit comes with 16 pieces in total, including the gaskets and diaphragms, the primer bulb and primer bulb assembly, and other necessary hardware. It is sold as a single unit. Always cool the engine completely and work in a well-ventilated area when performing carb rebuilds and replacements or other engine repairs.

This is a replacement chain brake that is designed as an identical part for select chainsaws. The chain brake is a safety component that covers the bar connection and helps to prevent injuries due to broken or loose chains. This piece is exposed to a lot of potential impact damage and debris, which can affect how well it works. The cover can become cracked or otherwise damaged. Without the chain brake cover, the saw will be unsafe to operate. In some cases, models may not operate at all until the chain brake is replaced. This genuine part will provide an exact fit for compatible saws. This OEM chain brake is manufactured by Poulan and compatible with more than 60 chainsaws from Poulan and Husqvarna. The chain brake is a high-quality part that is made of durable metal and plastic and it is sold as an individual piece. The hardware to install this part is sold separately. It is important to install the chain brake with the appropriate hardware and using the right tools so that it can be engaged to stop the chain in the event that it breaks or comes loose. Always disengage the spark plug or disconnect the power supply before performing equipment repairs.

Combustion engines operate because of the chambers that seal in the tiny explosions caused by fuel, air and a spark. The pistons are part of the process of taking power from those explosions, and the piston rings seal the combustion chamber so that all of the gases created remain inside of the engine's crankcase. This replacement piston ring will ensure that a chainsaw's engine can do that, as well as maintaining the right amount of oil between the piston and the cylinder wall. An OEM replacement part, this piston ring works with Craftsman and Husqvarna chainsaws, among others. It will require a wrench set, screwdriver and a pair of pliers to make the replacement. Sold individually.

This air cleaner element is a genuine Echo replacement part for small engines that operate hedge trimmers. The function of an air cleaner element is to create a seal that protects the engine from collecting and taking in external dirt and debris that might debilitate the engine's infrastructure. The air cleaner element could fail from overuse; it is a part that must eventually be replaced as a part of routine maintenance, even with ordinary long-term use. If the air cleaner element is not effectively sealing, the rate at which the engine takes in air is lessened, thereby reducing the power and the fuel economy of the engine. If this occurs and it is determined that an overused or over-aged air cleaner element is at fault, as opposed to the air filter or another closely associated part, the air cleaner element should be replaced immediately and the appliance at hand should not be in use until it has been replaced. This air cleaner element is compatible with Echo brand hedge trimmers. This part sold individually.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

This kit includes all parts necessary to repair the carburetor on certain models of small engine outdoor power equipment.Internal combustion engines require a proper ratio of air to fuel in order to run. The carburetor is responsible for sending a combination of fuel and air to the motor for ignition. Because the carburetor is used every time the engine is started, it can deteriorate over time and may need to be repaired or replaced. Signs of a worn-out or deteriorating carburetor include backfiring, overheating, excessive black smoke, and reduced engine performance. This carburetor repair kit is a genuine OEM replacement part that has been sourced directly from the manufacturer. This carburetor repair kit can be used to fix various different models of Husqvarna, WeedEater, and Poulan blowers, trimmers, and hedge trimmers. Please note this part is sold individually.

This replacement part is a fuel line kit and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is used in appliances such as line trimmers and edgers. This part helps the user in determining how much fuel is present in the appliance and if they need to top it off prior to use. A new fuel line kit might be needed if the current one is damaged or missing. Be sure to wear work gloves during this replacement as fuel can get on the hands and become dangerous. Be sure the engine is powered off before attempting this repair. This fuel line kit is sold as a single kit and is sourced directly from the manufacturer. This part is a genuine OEM replacement part.

This part is a gasket. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a broken or defective gasket in outdoor power equipment.Gaskets are a common piece of equipment found in engines that seal together components and prevent leaks. They are important and can become worn, brittle, broken, or otherwise defective over time and will require replacement. If one gasket is faulty, check all other gaskets, as others may also require replacing. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this gasket, the appropriate owner's manual and equipment diagrams should be referred to. This gasket is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with small engine outdoor power equipment models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This genuine Echo retaining ring can be used as a replacement part for string trimmers, hedge trimmers, chainsaws, leaf blowers, and leaf vacuums. The function of a retaining ring for a small engine appliance is to fasten and limit the motion of a component by attaching it to a shaft or into a bore. A retaining ring can come loose and fall off, becoming lost. A retaining ring can also suffer damage over time in the form of punctures, piercings, or corrosion to the metal material that can preclude it from continuing to fasten components to shafts and bores. If this is the case, the damaged retaining ring should be immediately removed and replaced with this genuine OEM part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This retaining ring is compatible with the following brands: Echo, Little Wonder, and Shindaiwa.