Hotpoint Range / Cooktop / Oven Parts
Genuine Ge part
By: Ge
Part Number: WB24T10022
Burner not heating or stuck on? This surface element switch controls power to your cooktop burners. Common repair when heat won't adjust properly.
Do-It-Yourself Stories from Customers like You
Burner didn't work Larry W. • Aiea , HI • March 23, 2014
Replaced the switch infin by watching the video
Read more
More
Genuine Ge part
By: Ge
Part Number: WB14X103
Left side oven door hinge provides smooth opening and closing operation. Replace if cracked, seized, worn, or binding. Mounts to oven cavity interior.
Do-It-Yourself Stories from Customers like You
The left oven door hinge was siezing door would not open fully Tom J. • Powder Springs , GA • November 19, 2014
I ordered both hinges (if the nylon roller was bad on the left, it was probably going to go bad on the right side as well). The web site was easy to navigate, order process simple. Hinges arrived quickly. Slide the oven door up and off. unscrew the three screws for the hinge. You need to then pull up with some force (there is a big spring in there), and twist the hinge to get the last bit out. I used a hemostat to hold the spring and keep it from falling back into the hole. removed the...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB30T10045
The Large Haliant Element is an OEM replacement part for GE ranges/cooktops. This haliant burner element is 8 inches in diameter. The element lies underneath the stovetop and will need to be replaced if it stops heating. 8-inch 2100 watt. Includes limiter
Causes of a bad halogen element can include cracked or damaged ceramic material, broken support coils, or malfunctioning heating coils.
Symptoms of a bad halogen element include:
- Element not heating up properly or unexpectedly shutting off
- Burned-out coils or melting/warping of the protective, reflective dish
This is a genuine OEM part that works for some models of GE, and Hotpoint models.
Do-It-Yourself Stories from Customers like You
Non-working haliant element. Duane R. • Fort Myers , FL • March 14, 2014
Unplug range. Open oven door to gain access to the cook top lock-down screws, located under the front edge of the cook top. Tip the cook top up and carefully remove it by pulling forward. Set aside in a safe place. Remove old, burned-out, element by removing the single lock tab, located on one of the three mounting posts, then lift up. Leave the wiring attached. Flip the element over and remove the three mounting tabs, making note of their numbered locations. Transfer the mounting tabs to...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB48X10056
Broiler pan for ranges and ovens. Installs in main oven cavity to hold food under broiler element. Replace if cracked, warped, or heavily stained.
Do-It-Yourself Stories from Customers like You
None Ralph W. • Brentwoo , NY • July 13, 2014
Fast delivery, great service
Read more
More
Genuine Ge part
By: Ge
Part Number: WB28K10190
Holds the gas orifice in place at the front burner on gas ranges. Replace if cracked, broken, or kinked from repeated lifting of the cooktop.
Do-It-Yourself Stories from Customers like You
It started out like usual an easy project ! stove needed leveling the top was always spongy (do to original install not correct ) John B. • Georgetown , IN • March 26, 2020
Once I watched the video on your site about gas line install, it became apparent why the line bent when I raised the lid.. also discovered those two rods have nest to go into and the lid/top now sets down tight as designed ( and as an added bonus, gas smell disappeared during oven use)
I ordered the gas lines with the model number, ordered all four …. it was a bit of a chore one came up when site opened I picked it, but did not know if it was the RH or LH etc.. so reading some of your answers...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB20X10048
The Thermostat is an OEM part for GE microwaves. This part regulates the temperature within the microwave, ensuring it operates within safe and efficient temperature ranges. It helps prevent overheating by monitoring and controlling the internal temperature, protecting both the appliance and the user.
Causes of a bad thermostat can include wear and tear over time, electrical malfunctions, or damage from power surges.
Symptoms of a bad thermostat include:
- Microwave not heating properly
- Overheating or shutting off unexpectedly
- Error codes related to temperature issues
- Inconsistent cooking times
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
No power none at all completely dead Jeff D. • Yarmouth , ME • November 18, 2017
GE Microwave/Convection Oven. Removed case (carefully). Tested in-line power cord fuse with multi-meter. Fuse was good. Noticed a scorch mark on a wire connected to the oven cavity thermal fuse. The fuse appeared to have been overheated from too much movement in it's mount. Removed part from unit and used number on the part to order a new one. Installed new part, re-assembled, and unit works fine.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB17X210
Burner not heating or making poor contact? A damaged terminal block disrupts power to heating elements. DIY-friendly repair, takes about 10 minutes.
Do-It-Yourself Stories from Customers like You
The terminal block on my stove burned out Michael Y. • Fredericksburg , VA • November 28, 2014
Ordered a new terminal block kit from Appliance Parts Pros. Shipping was lightening fast. Slapped the new part on my stove and its never worked better. Thanksgiving was saved! I'd replace the rest of my stove's terminal blocks if they weren't $50 a piece...sheesh!
Read more
More
Genuine Ge part
By: Ge
Part Number: WB30X253
If your burner won't heat or has stopped working, this 8-inch surface heating element restores cooktop function. Easy plug-in installation in minutes.
Do-It-Yourself Stories from Customers like You
Needed new heating coils Judith C. • Stanhope , NJ • February 22, 2016
Ordered new heating coils for stove
Read more
More
Genuine Ge part
By: Ge
Part Number: WB16X24721
Replacement small surface burner for gas ranges and cooktops. Restores proper flame control when original burner is damaged, cracked, or corroded.
Do-It-Yourself Stories from Customers like You
Burner elements needed replacement Nadine L. • Kingsland , GA • November 02, 2025
Remove and replace
Read more
More
Genuine Ge part
By: Ge
Part Number: WB7X7189
Finishing piece that fits on either end of your range door handle. Replace if cracked, broken, or missing to restore appearance and secure the handle.
Do-It-Yourself Stories from Customers like You
The plastic end brackets of the oven handle had broken Martin K. • Gilbert , AZ • January 20, 2015
Purchased new end brackets. Then installed them very easily by taking out 6 screws.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB24T10058
Burner stays on high or won't turn off completely? This infinite control switch regulates surface burner heat. Simple 10-minute DIY fix with video guide.
Do-It-Yourself Stories from Customers like You
Bad burner switch James C. • Augusta , NJ • January 04, 2015
I first checked a repair video and found the procedure was a 10 minute job. I then went to the website, put in my stove model number and searched for the switch. While I was looking I was offered a chat session with one of their experts. I am glad that I accepted. The switch I was looking at was not the right switch for the job. My expert verified my model number and the switch that need to be replaced. After a couple of minutes, she came back with the right part and placed the order for...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB03K10037
Replace your broken, cracked, or faded gas range oven thermostat knob. This control knob slides onto the thermostat shaft for temperature selection.
Do-It-Yourself Stories from Customers like You
The oven thermostat broke; than it wouldn't turn off thankfully it was onl stuck at about 100 degrees Roger L. • Pittston , ME • December 02, 2017
I watched a video on this web site, which was great. Just had to familiarize myself where the parts are on my stove. It took longer than a pro, but I didn't have to pay for a service call and the parts were cheaper, too. It was just a bit more difficult than changing a light switch.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB15X10048
White door handle for range ovens. Mounts to the front of the oven door for opening and closing. Replace if cracked, broken, or worn from use.
Do-It-Yourself Stories from Customers like You
Broken oven door handle Thomas O. • Arlington , TX • February 20, 2019
Found and ordered the handle on appliance parts pros. It was easy to find came in earlier than expected. The handle was easy to install and fit perfectly
Read more
More
Genuine Ge part
By: Ge
Part Number: WB35X29668
Replace your oven door gasket when frayed, hardened, or heat leaks around the door. Forms an airtight seal to maintain cooking temperatures. Verify fit by model.
Do-It-Yourself Stories from Customers like You
Needed a new gasket around the inside window on the door for my ge profile range Ira G. • Morton Grove , IL • August 15, 2016
The video shown was completely incorrect for the gasket needed on my range.
I had to remove the door, disassemble the inside panel, and remove the old gasket. I suggest you have assistance when doing this. Putting on the new gasket was challenging but not impossible for a do it your selfer.
You should make a video for this gasket so people don't think it is as easy as pulling a few pins around the window!!
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X3692
Door shelf bar installs on the refrigerator door to create storage compartments for condiments and small items. Replace if cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
Several shelves in freezer were missing.. Louis W. • West Columbia , SC • August 13, 2022
Ordered the correct parts and the repair was quick.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB30X342
Fix a burner that won't heat with this 6-inch surface element. Plugs directly into your range's burner receptacle. DIY-friendly, 15-minute install.
Do-It-Yourself Stories from Customers like You
The front burner supports were disengaged from the element this is what prompted to replace the burner Thomas M. • Osterville , MA • July 14, 2015
Removed the defective burner labeled the leads as to their location and coil connections. Replaced the connections to the corresponding locations, 1 to 1, 2 to 2 and the bridged terminal as it was. I noticed that the coils in the replacement burner were not wound in the same direction as the original burner and made note of this. I did not think much of this at the time, but on turning the power back on and lighting up the burners I noticed up they were not lighting up the corresponding...
Read more
More