Parts for Lg LFX28968ST/05: Ice Maker & Ice Bin Parts

Replacement mounting screw for refrigerator assembly. Secures components and panels inside your fridge. Order a new screw if yours is stripped or missing.

Replacement mounting screw for refrigerator panels, brackets, and internal assemblies. Restores secure fastening when original screw is missing, stripped, or damaged.

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Mounting screw for bottom-mount refrigerators. Secures internal components and panels. Replace if stripped, missing, or damaged during repair work.

Replacement mounting screw for refrigerator panels, brackets, and assemblies. Needed when original fastener is stripped, worn, or missing.

Taptite screw for securing components inside your refrigerator. Replaces lost, stripped, or corroded fasteners during repairs or reassembly.

Replacement holder bracket for refrigerators. Secures internal components in place. Order a new bracket if yours is cracked, broken, or missing.

This rear door handle replaces a worn or damaged handle on compatible LG appliances, restoring a secure grip and smooth opening. It's a direct-fit exterior handle that keeps the appliance door operating and looking right. What it does

• Provides a secure gripping point to open and close the appliance door
• Replaces cracked, loose, or broken rear handle hardware
• Restores correct alignment and feel when the door is operated
• Helps prevent further damage to the door edge from makeshift handles

• Power off and unplug the appliance before starting work; remove food or shelves as needed for access
• Keep fasteners and mounting clips; transfer original hardware unless new hardware is explicitly included
• Test door operation and alignment after installation; tighten fasteners evenly to avoid stress

Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.

Adjustable leveling leg that threads into the refrigerator base frame to support and stabilize the unit. Replace worn, broken, or missing legs.

Fix uneven cooling or excess noise in your refrigerator. This air duct assembly restores proper airflow between compartments for consistent temperatures.

Freezer drawer roller assembly enables smooth gliding of your refrigerator's lower drawer. Replace if drawer sticks, wobbles, or is hard to open. Confirm fit with your model number before ordering.

Dual roller wheel assembly that mounts to the rear wall of the freezer drawer. Replace when wheels are missing, broken, or cracked for smooth sliding.

Replaces a cracked, warped, or broken drawer tray in your refrigerator. Restores level storage and smooth operation for food and items in the drawer.

Replace your broken refrigerator drawer tray assembly to restore proper alignment and support for stored items. Includes complete tray structure. Verify fit with your model number before ordering.

Replace a cracked, broken, or missing refrigerator shelf. This glass shelf assembly installs on standard supports to restore organized storage space.

Replaces a cracked, bowed, or missing refrigerator shelf. Restores sturdy, level storage surface in the fresh food compartment for organized food.

Replaces a cracked, bowed, or missing refrigerator shelf. Restores sturdy, level storage surface in the fresh food compartment for organized food.

Replaces a cracked, bowed, or missing refrigerator shelf. Restores sturdy, level storage surface in the fresh food compartment for organized food.

Replace your broken or cracked refrigerator glass shelf. This tempered glass shelf installs in the fresh food compartment to organize food items.

Replace a cracked, broken, or missing refrigerator shelf. This glass shelf assembly installs on standard supports to restore organized storage space.

Secures and supports shelves inside your refrigerator. Replace if cracked, broken, or missing to properly hold shelves in place and restore stability.

Drawer slide rail guide assembly for refrigerator shelves and bins. Replaces worn, broken, or damaged rails that cause sticking or misalignment.

Right-side Fresh Room tray assembly for refrigerator pantry drawers. Replace if cracked, broken, or warped. Restores level storage in deli section.

Air duct connector for refrigerators. Channels airflow between compartments. Replace if cracked, broken, or missing to restore proper air circulation.

Fix erratic operation or cycling issues in your refrigerator with this DC drive motor. Restores proper rotation and performance when the original motor fails.

Replacement decor panel assembly for bottom-mount refrigerators. Covers and conceals the exterior housing. Needed when original panel is cracked, chipped, or missing.

Dim or uneven refrigerator lighting? This LED light cover protects the bulb assembly and diffuses light evenly. Direct-fit lens restores visibility.

Keeps refrigerator air fresh by filtering odors and contaminants. Replace every 6 months or when indicator alerts. Confirm fit with your model number.

Right-side vegetable crisper drawer for bottom-mount refrigerators. Replace if cracked, broken, or missing to restore produce storage functionality.

Left side vegetable drawer assembly for bottom-mount refrigerators. Includes wheels and track system. Replace if cracked, broken, or missing.

This is a clear or translucent cover frame that sits above the crisper drawers in the refrigerator compartment. It acts as a shelf and humidity barrier, helping regulate moisture levels around stored fruits and vegetables. Replace this cover if it is cracked, warped, or no longer sits flush, which can affect cooling efficiency and humidity control in the crisper area.

This guide assembly is a chassis alignment and support piece that helps hold and position internal TV components for proper fit and operation. Replacing a damaged guide restores secure mounting and reduces panel or board movement. What it does:

• Secures and aligns internal TV modules or boards to the cabinet
• Prevents rubbing, vibration noise, and intermittent contact from loose parts
• Helps keep the display and internal assemblies correctly spaced for reliable operation
• Useful when cracked, warped, or broken guides cause misalignment or rattling

• One guide assembly as shown

• Unplug the TV and remove power/antenna cables before starting
• Ground yourself to protect against static-sensitive components
• Use original screws and fasteners; inspect adjacent tabs and mounts for damage during installation

Replaces worn or broken slide rail that supports refrigerator drawer movement. Restores proper alignment for smooth, quiet gliding along the track.

This guide assembly is a factory-style mounting guide used in TV chassis to position and support internal components, helping maintain correct alignment and stable operation during use and service. What it does:

• Provides a mounting and alignment point for internal TV components to keep assemblies stable
• Helps maintain proper spacing between parts to prevent rubbing, misalignment, or rattling noises
• Can restore correct fit where a damaged or worn guide causes loose panels or shifting components
• Useful when repairing or replacing adjacent parts that rely on the guide for proper positioning

• Guide assembly

• Disconnect power and remove the TV from its wall mount or stand before servicing
• Handle the panel and internal boards carefully to avoid damage; use non-marring tools
• Keep track of all screws and grounding hardware removed during disassembly for reassembly

Rail guide assembly for refrigerator or freezer drawers. Guides and supports the slide rail for smooth drawer movement. Replace if worn, cracked, or broken.

This rail guide assembly supports and guides a refrigerator drawer as it opens and closes. Replacing a worn or damaged rail restores smooth sliding, proper alignment, and reliable closure to help maintain a consistent seal and temperature.

• Provides the sliding track that supports the drawer under load
• Keeps the drawer level and aligned within the cabinet
• Helps the drawer close fully for a proper gasket/door seal
• Common symptoms: drawer sticks or binds, tilts or sags, won't close completely, noisy/grinding movement, visible cracks or wear

• Disconnect power and empty the drawer before starting
• Remove the drawer/bin and front panel to access the rail
• Unfasten and remove the damaged rail; transfer any reusable clips/brackets from the original if applicable
• Secure the new rail, reinstall the drawer, and verify smooth travel and full closure

Foam insulation assembly that fits inside the freezer door panel. Replace if foam is compressed, cracked, deteriorating, or missing to restore door seal.

Replace your worn freezer door gasket to restore an airtight seal. Keeps cold air in, reduces frost buildup, and maintains stable temperatures. Confirm fit with your model number before ordering.

Decorative cover for refrigerator door handle. Installs over the handle assembly to provide a finished appearance. Replace if cracked, discolored, or missing.

This decor handle is a cosmetic and functional door handle designed to replace a cracked, broken or worn handle and restore a secure grip and finished look to the appliance door. It installs in place of the original trim handle. What it does:

• Provides a finished grip for opening and closing the appliance door
• Replaces damaged, cracked or loose handles that affect use and appearance
• Restores proper alignment and user control when the original handle is worn
• Matches the appliance's exterior trim for a cohesive look

• Disconnect power to the appliance before starting any repair
• Remove any door trim or fasteners as needed to access mounting points
• Use the original screws or OEM-replacement fasteners; do not overtighten

Covers and protects the refrigerator door hinge assembly. Replace if cracked, broken, or missing to restore a clean finished look and shield hinge parts.

Covers and protects the door hinge area on your refrigerator. Replace if cracked, broken, or missing to restore a finished look and shield wiring.

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

Handle assembly for bottom-mount refrigerator freezer drawers. Includes handle and operating mechanism. Replace if cracked, broken, or loose from wear.

Refrigerator door gasket seals the door to maintain temperature and prevent air leaks. Replace when worn, cracked, or not sealing properly. Confirm fit.

Door gasket creates an airtight seal to keep cold air in and warm air out. Replace if torn, cracked, or no longer sealing properly. Confirm fit by model.

The Refrigerator Flipper Assembly is an OEM part for LG refrigerators. This assists in the smooth opening and closing of the refrigerator door. It ensures an airtight seal when the door is closed, preventing cool air from escaping and maintaining the refrigerator's internal temperature. 

Causes of a malfunctioning Refrigerator Flipper Assembly can range from physical damage, such as cracks or breakage, to wear and tear from regular use.

Symptoms of a bad Refrigerator Flipper Assembly include:

• Difficulty in opening or closing the refrigerator door
• A noticeable gap when the door is supposed to be sealed shut
• Increased energy consumption as the refrigerator works harder to maintain its temperature
• Spoilage of food items quicker than expected due to poor temperature regulation

This OEM LG part is also compatible with some Kenmore models.

Replacement door bin for refrigerator storage. Installs on the door to organize bottles, jars, and condiments. Replace if cracked, broken, or damaged.

Replacement door basket assembly for refrigerator doors. Holds condiments, bottles, and small items. Order when your bin is cracked, broken, or damaged.

Door basket assembly installs in refrigerator door to organize condiments, jars, and bottles. Replace if cracked, broken, or missing for proper storage.

Interior door basket assembly for refrigerators. Mounts inside the door to organize condiments, beverages, and small items. Replace if cracked or broken.

Door stopper assembly for refrigerators. Installs on the door to limit opening angle and prevent wall damage. Replace if cracked, broken, or missing.

Door stop assembly for bottom-mount refrigerators. Mounts inside the door to control door closing and sealing. Replace if broken, cracked, or missing.

Fix clicking doors or misaligned refrigerator doors with a new hinge cam. Restores smooth open/close action and proper door alignment. DIY-friendly repair.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Plastic door stop that limits refrigerator door swing range. Replaces broken, cracked, or missing stoppers causing doors to swing too wide or close improperly.

Replace a worn, loose, or broken refrigerator door handle with this complete handle assembly. It restores a secure, comfortable grip so you can open and close the refrigerator door easily while maintaining the unit's original look. What it does:

• Attaches to the refrigerator door to provide a sturdy handhold
• Replaces cracked, broken, or missing handles
• Helps correct a loose or wobbly handle that won't stay secure
• Restores the factory appearance of the door

• 1 refrigerator door handle assembly

• Disconnect power and protect the door surface with tape or a cloth before starting
• Remove any trim/caps as needed and loosen the hidden set screws or mounting bolts on the old handle
• Position the new handle, then tighten fasteners evenly—do not overtighten
• Reinstall any caps/trim and ensure the handle is secure

Drawer rail holder for bottom-mount refrigerators. Secures drawer slide rails to the cabinet. Replace if cracked, broken, or missing to restore drawer support.

Plastic rail holder that secures shelf rails inside your refrigerator. Replace this holder if it's cracked, broken, or missing to restore proper shelf support.

This slide rail is a replacement drawer guide that restores smooth, stable drawer movement and helps prevent binding or sagging. Designed to match the OEM fit so drawers open and close reliably. What it does:

• Guides and supports the appliance drawer for smooth sliding motion
• Replaces worn or damaged rails that cause sticking, sticking intermittently, or uneven travel
• Helps prevent drawer tilt or sag when loaded
• Restores proper alignment for secure closing

• Disconnect power to the appliance before beginning any work
• Remove the drawer per your model's service instructions to access the rail
• Use basic hand tools (screwdriver/driver) to remove and replace the rail; keep fasteners for reuse
• Align the rail carefully, slide the drawer to test operation, and verify smooth movement before returning the appliance to service

Supports and guides refrigerator drawers for smooth gliding. Replace when worn, broken, or causing binding. Confirm fit with your model number.

Replace a worn or broken freezer drawer bar connector assembly to restore smooth gliding and proper alignment. Confirm fit with your model number.

Specialized spanner tool for turning slotted nuts and collars on refrigerator components. Replace if lost, worn, or damaged to safely adjust fittings.

Secures and pivots the center refrigerator door for proper alignment and sealing. Replace if your door sags, won't close fully, or pivots roughly. Verify fit by model number before ordering.

Secures and pivots the upper refrigerator door for proper alignment and smooth opening. Replace if your door sags, won't close properly, or hinge is damaged. Verify fit by model number before ordering.

Replacement ring for your refrigerator. Installs on internal components to secure or seal parts. Order a new ring if yours is cracked or missing.

Refrigerator mullion door won't close or seal properly? This spring operates the center divider flapper door. DIY-friendly installation in 5 minutes.

Upper door hinge assembly for bottom-mount refrigerators. Mounts at the top of the cabinet to support the door. Replace if cracked, broken, or lost.

Right side upper hinge.

Ice freezing in holder or chute not opening fully? This ice dispenser door seals the chute to prevent frost buildup and air leaks. Easy DIY repair.

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

Ice chute door not opening fully? This dispenser door link connects the actuator to the door for smooth operation. Simple DIY fix for binding doors.

This holder bracket secures internal refrigerator components in place. Replace if your original bracket is cracked, broken, or missing to restore stability.

Spring for the ice door lever mechanism in your refrigerator's dispenser. Replace if the spring is stretched, broken, or missing and the ice door won't stay closed.

Fix water pooling or leaks inside your refrigerator with this water funnel. Directs water flow to prevent drainage issues. Easy DIY repair in minutes.

If your refrigerator dispenser paddle is cracked, loose, or won't spring back, this lever restores reliable push-button operation and user control.

Fix a refrigerator door that won't latch or a control that doesn't respond. This lever button restores push-button function in 15 minutes or less.

Display cover assembly for refrigerator control panel. Replace if cracked, broken, or damaged. Includes control housing. Check model compatibility.

Fix a cracked or broken dispenser cover on your refrigerator. This frame protects internal components from spills and debris. Easy DIY fix.

Ice or water dispenser not responding? This lever button transfers your press to the internal switch. Moderate difficulty—requires removing drip tray.

Water pooling under your refrigerator? The drain tray collects defrost water and prevents leaks. Straightforward replacement for most bottom-mount models.

Decorative cover for your refrigerator's drain area. Replaces cracked, broken, or missing drain decor pieces. Installs in the bottom compartment.

Refrigerator not cooling or freezer warm? The compressor assembly circulates refrigerant to maintain temperature. Professional installation recommended.

Fix refrigerator not cooling or freezing issues with this evaporator coil assembly. Restores proper temperature control. Moderate DIY repair, 1-2 hours.

Fix a refrigerator that won't cool or start with this compressor start device. Works with the PTC thermistor to help your compressor run properly.

Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.

Protective cover for the PTC start relay on your refrigerator compressor. Replace if cracked, broken, or missing to shield relay components from damage.

Refrigerator not cooling or making unusual noises? This compressor sealing pipe restores proper refrigerant flow. Moderate difficulty repair part.

Front cover panel for your refrigerator door. Snaps into place to restore appearance and protect controls. Replace if cracked, broken, or missing clips.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

This noise damper reduces vibration and rattling sounds from refrigerant lines in your refrigerator. It cushions the copper tubing against the cabinet to prevent metal-on-metal contact that creates annoying noises. Install this damper if your refrigerator makes clicking, rattling, or vibrating sounds, especially when the compressor cycles on and off.

Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.

Replacement drip tray for refrigerators. Installs under evaporator coils to catch condensation and defrost water. Replace if cracked, warped, or missing.

Refrigerator not cooling evenly or making loud fan noise? This fan grill assembly protects the fan blade and directs airflow for consistent cooling.

Frost buildup affecting cooling? This refrigerator defrost heater melts ice from evaporator coils to restore efficiency. Moderate DIY repair.

Refrigerator light stays on or door alarm won't work? This magnet switch senses door position to control interior lighting and alerts. Quick DIY fix.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Refrigerator not cooling evenly or freezer warm? The evaporator fan motor circulates cold air throughout both compartments. Direct replacement part.

A replacement cover motor that powers the refrigerator's dispenser cover, allowing the door to open and close so you can access ice and water. Replaces a worn or failed motor to restore normal dispenser cover operation. What it does:

• Drives the dispenser cover mechanism so the cover opens when dispensing and closes when idle
• Helps keep the dispenser sealed to reduce drafts and prevent pests or debris from entering
• Stops or fails to move when worn, causing a stuck, slow, or noisy dispenser cover
• Works with the dispenser linkage and gears to coordinate cover motion with user controls

What's included:

• One cover motor

Install notes:

• Disconnect power to the appliance before beginning any repair
• Remove dispenser trim and access panel per your model's service instructions to reach the motor
• Handle gears and linkage carefully; ensure proper alignment during reassembly and test cover operation before finishing

Uneven cooling or noisy damper? This damper motor support bracket secures the air control assembly for proper airflow between compartments. DIY fix.

Refrigerator not cooling properly? This damper motor support secures the air damper assembly that controls airflow between compartments. Simple DIY fix.

The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freezer. 

Symptoms of a bad Ice Dispenser Door Motor include:

• The dispenser door not opening or closing properly,
• Ice not being dispensed when activated,
• Unusual noises coming from the dispenser mechanism.

Causes of ice dispenser door motor failure can include electrical issues such as shorts or wiring problems, mechanical wear over time, or blockages that strain the motor.

This OEM LG part is also compatible with Sears/Kenmore.

Fix unresponsive controls or features that won't activate with this refrigerator push button switch. Simple replacement restores button functionality.

Supports and stabilizes your refrigerator door for proper alignment. Replace if bracket is cracked, broken, or causing door misalignment issues.

Fix uneven cooling or warm spots in your fridge with this evaporator fan motor assembly. Circulates cold air throughout refrigerator compartments.

Replaces cracked or yellowed interior light lens. Protects bulb from moisture and impact while ensuring even illumination. Verify fit by model number.

This run capacitor provides the continuous electrical boost needed to keep the refrigerator's compressor motor running efficiently. It stores and releases energy to maintain the proper phase and voltage for the compressor during normal operation. Replace this capacitor if the compressor struggles to start, hums without running, shuts off intermittently, or if the refrigerator stops cooling altogether.

Refrigerator won't start or compressor struggles to run? The run capacitor provides the power boost needed to start and maintain compressor operation.

Fixes refrigerator power loss, sparking, or intermittent operation. This power cord assembly restores safe electrical connection from wall outlet to appliance.

Fix refrigerator not cooling, lights not working, or dispenser failure with this main control board. Controls cooling cycles, defrost, and functions.

Fix a refrigerator that won't cool, has no display, or won't power on. This power control board assembly restores electrical function and system control.

Protective cover assembly that shields the printed circuit board (PCB) in your refrigerator. Replace if cracked, broken, or missing to protect electronics.

Dim or uneven refrigerator lighting? This interior light cover assembly shields the bulb and diffuses light evenly. Simple 5-minute snap-in repair.

The Ice Maker Assembly Kit is an OEM part for LG refrigerators. This kit includes all the necessary components to produce ice efficiently, ensuring your refrigerator maintains a steady supply of ice for your household. The kit also features a 20-pin and 3-pin wiring harness.

Causes of a bad ice maker assembly can include wear and tear over time, mineral buildup from hard water, or electrical malfunctions. Additionally, damage can occur due to improper handling or issues with other components in the ice-making system.

Symptoms of a bad ice maker assembly include:

• No ice production
• Slow ice production or smaller ice cubes
• Ice cubes that are misshapen or irregular
• Leaking water around the ice maker
•  Unusual noises during the ice-making process

This OEM LG part is also compatible with Sears/Kenmore.

This is the motor that drives the auger inside the ice dispenser chute of a refrigerator. It rotates the auger to push ice from the storage bin through the dispenser opening when the lever or button is activated. Replace this motor if ice is not dispensing, you hear a humming sound but the auger doesn't turn, or the dispenser motor has stopped working entirely.

Fix inaccurate temperature readings or sensor errors with this refrigerator sensor control board. Restores proper sensor communication and feedback.

The Temperature Sensor is an OEM part for LG refrigerators. Also known as a thermistor, is responsible for sensing the temperature changes and providing the necessary feedback to the refrigerator's control board. It helps maintain accurate and consistent temperature levels, ensuring optimal food preservation and efficient cooling.

Causes of a faulty temperature sensor can include wear and tear over time, damage due to electrical issues or exposure to extreme temperatures, or sensor calibration issues. These factors can result in temperature inconsistencies, inaccurate readings, or improper cooling performance of the refrigerator.

Symptoms of a bad temperature sensor may include:

• Incorrect temperature readings on the control panel
• Temperature fluctuations inside the refrigerator
• Overcooling or inadequate cooling of food items

This OEM LG part can also be used on Kenmore/Sears appliances. 

Ice maker not producing ice or auger not dispensing? This ice maker and auger motor assembly restores automatic ice production and dispensing function.

Stores and supplies water to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged from mineral buildup or freezing.

Leaking water line connections? This inline tube connector joins two sections of tubing for a secure, leak-resistant seal. Quick 10-minute fix.

Fix water leaks from your refrigerator with this water line tube assembly. Stops leaks caused by brittle or kinked tubing and restores normal flow.

Fix water leaks from your refrigerator with this water line tube assembly. Stops leaks caused by brittle or kinked tubing and restores normal flow.

If your refrigerator's water dispenser or ice maker stopped working, the water tank assembly may need replacement. Restores proper water flow and ice production.

Leaking water from your refrigerator or no water/ice from dispenser? This water inlet valve controls flow to ice maker and dispenser. DIY repair in 30 min.

Plastic cover cap for refrigerators. Snaps onto hinges, handles, or shelving brackets to conceal mounting hardware. Replace when cracked or missing.

This water filter head assembly holds the water filter and connects the water lines to the filter.

Fix loud jackhammer sounds or weak water flow from your refrigerator dispenser. This filter head assembly houses the water filter inside the fridge.

Allows water to flow directly to your dispenser and ice maker without filtration. Install when choosing not to use a water filter. Confirm fit by model.

Removes impurities and contaminants from water and ice. Replace every 6 months or 200 gallons for clean, fresh-tasting water. Verify fit by model.

Covers and protects refrigerator tubing inside the cabinet. Replace this tube cover if the original is cracked, broken, or missing to restore proper appearance.

Refrigerator pipe holder bracket secures water lines and tubing in place. Replace if cracked, broken, or missing to properly support pipes inside your fridge.

This replacement pipe holder secures a small appliance pipe or tube in place, reducing movement and vibration to help prevent noise, wear, or accidental disconnection. It restores proper routing and support for the pipe. What it does:

• Secures a pipe or tubing to the appliance frame or chassis to keep it from shifting
• Reduces rattling or vibration caused by loose plumbing or tubing
• Helps maintain proper alignment to avoid chafing or contact with other components
• Useful when a cracked, broken, or missing clip allows pipe movement

• Turn off and unplug the appliance before accessing internal components
• Remove any panels or covers to reach the pipe clip location
• Snap the clip over the pipe into the existing mounting tab; replace any damaged mounting hardware

Home bar cover panel for bottom-mount refrigerators. Replaces cracked, broken, or missing exterior home bar covers. Restores appearance and finish.

Secures and pivots the ice bank door for smooth opening and proper sealing. Replace if door sags, won't close, or ice dispenser misaligns. Confirm fit.

Seals your refrigerator door to keep cold air in and warm air out. Replace if torn, cracked, or not sealing properly. Confirm fit with your model number.